Hey Andy. I did this today, and the result is excellent! I’ve mounted the interior of the mark 7.5 2016 Fiësta. Black/dark gey leather. Everything you’ve explained was spot on. It took me less than 4 hours, including the cleaning of the seats and interior. Thanks again for the DIY vid. I’m a fan and a follower now!! 🤜🏻🤛🏻
@@ld3713 I am afraid not. They are not plug and play and you need to run some serious wiring into the car to make them work with the mk7. It can be done but a little above my pay grade! 👍
It’s essentially the same except you don’t have that green plug on the drivers side. As that is the proximity sensor on the seat so it kind of presumes there is someone sitting in the drivers seat when it’s moving 😂
Im getting an airbag light my 2010 van didint have seat belt or occupant sensor on passenger side and on driver side there is only the purple and orage any suggestions to get the light out as mot is soon
Hi Callum. Provided all the wires are swapped on the new seats to the old plugs on the old seats, it should just work with no airbag lights. Have you checked that part of the video? Let me know if it still does not work after checking it buddy.
This was exactly what I was looking for! Thank you soo much! 🤜🏻🤛🏻
@@RichieLassard thanks buddy! They make such a difference to the comfort level as well as the styling!
Hey Andy. I did this today, and the result is excellent! I’ve mounted the interior of the mark 7.5 2016 Fiësta. Black/dark gey leather. Everything you’ve explained was spot on. It took me less than 4 hours, including the cleaning of the seats and interior. Thanks again for the DIY vid. I’m a fan and a follower now!!
🤜🏻🤛🏻
@ massive thanks for the follow Richie. I’m glad it helped you out!
@ You’re the MAN Andy!
i’ve already got st seats installed however the clip that pulls the seat down to get people in the back doesn’t work. Anyone know how to fix this?
Hi, Great video but one quick question. Will there be a part 2 for connecting the heat elements of the seats?
@@ld3713 I am afraid not. They are not plug and play and you need to run some serious wiring into the car to make them work with the mk7. It can be done but a little above my pay grade! 👍
what about the drivers side with the connector plugs?
It’s essentially the same except you don’t have that green plug on the drivers side. As that is the proximity sensor on the seat so it kind of presumes there is someone sitting in the drivers seat when it’s moving 😂
Im getting an airbag light my 2010 van didint have seat belt or occupant sensor on passenger side and on driver side there is only the purple and orage any suggestions to get the light out as mot is soon
Hi Callum. Provided all the wires are swapped on the new seats to the old plugs on the old seats, it should just work with no airbag lights. Have you checked that part of the video? Let me know if it still does not work after checking it buddy.