CD - 210V 8 X 16 Lathe from eBay Servo motor Upgrade part 4 With Review
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Here we Do a 900 Watt and a 750 Watt Servo motor Upgrade on a 8 X 16 Mini Metal Lathe. Includes comparisons of resulting speeds.
Part 1:
• M - 210V 8 X 16 Metal ...
We show the the issues we run into while adjusting the carriage.
Part 2:
• 210V 8 X 16 Lathe from...
Carriage issues and set up.
This is part 3: Basic Chuck setup
• CD - 210V 8 X 16 Lathe...
Dialing in Chuck accuracy without fancy tooling.
Part 4: Now Showing.
Servo motor Upgrade. l show conversion to a modern tech servo motor.
In part 5: Coming soon
We will show building in the control board + switches etc.
Seams we will need a part 6 to include a electronic lead screw kit.
See the 750 Watt kit here:
www.servomotor...
See the 900 Watt Kit here:
www.servomotor...
See our other kits here:
www.servomotor....
We take no responsibility and accept no liability for anything you attempt to build or operate after watching any of our videos. It is your responsibility to insure safe operation, suitability, fit and proper application of any machine you build or modify. Our liability is limited to the purchase price of the items you purchase directly from us.
Hi, wondering what you think the best ratio between drive and the driven pulley would get the best result?
What belt do you have on that machine?
The belt is the original belt that came on the lathe. there is no part number.
Hey my man, Do you have the 1500 watt motor setup for that exact lathe?
That lathe has our 750 watt motor on it. This is the best motor for this lathe. Consider this: Most manufactures motors have 1/4 to 1/2 as much torque as our motors.
Our 750 watt produces 10 NM torque
Most other brands you need a 1500W to produce this much torque
the lead screw ontheser have a crappy design. i am going to be switching to an TR16 and make a new half nut for it. i have upgraded the bushings on both ends to be bearings. once I get me bed leveled from a machine shop with a surface grinder I will start doing re-assembly work and doing work to stiffen the bed to remove rear flex that are common to be seen on these lathes.
Wanna sell that unit?
It will become for sale when all the bugs are worked out. Are you serious?
@@danielmartin382 Where can we find the machines you have for sell???
@@onemischiefmaker7032 Right now all machines we have are Demonstrators used to test upgrades on. When the build in is finished on this machine will be listed for sale on our site. However we only ship upgrades. Whole machines are a local pick up only item.