I came from PR knot to FG knot...now to SC knot. I like SC knot the best! very easy no tool needed and fast plus strong. I landed over 200lbs BFT no problem at all.
Looks good to me. Except for the exposed double line from the end of the wraps to the beginning before the half hitches, can be abraded more easily which can result in the knot unraveling. So i still prefer the FG; but that’s just me. 😎
It's basically a modified and added finish to a YUCATAN KNOT. The idea of all of these knots is the premise that we use a higher test strength mono leader. This is to allow the braid to imprint via deformation into the mono. This is why these all only work if the mono is sufficiently higher test than the braid tonallow for some loss of its strength via the braid imprinting and thus deformity the mono. The second part is you want to avoid doing anything to cut into the braid itself via its own line. Locking down those final lock off knots that hard may actually have it lowering its break strength. It would need to be tested. Nothing wrong with the half hitchs and finishing rizzuto knot. The issue comes from how hard you cinch it down. No more than needed to lock it as its only there to create a ramp for the guides. You need to keep to the goals and intent of each part. The locking power holding the mono and braid to each other comes from friction to the braid to mono and it reforming into the mono with the tag in self locked period. There should never be much tension from stressing the knot on the lock off of the braid. Just remember everything you have the braid crossing over itself thus cutting into itself you create a weakness when force is applied. Basically a Yucatan knot but increasing the number of loops from the typical 6-8 to those used in the FG 20-30. That us the major change as itmore than doubles the surface area connection between braid to mono on top of the braid being doubled over. The only thing to improve on might be to take a small amount of braid or wazed floss and doing some wraps on the mono end to protect wear thru as it reeled in thru the guide. As if that area of the loop wears it will fail the knot as it will unravel. But it's a great knot that is not as technical on tension during loops/twists as the fg. BTW if the leader mono is of same or lower test strength just double it.
Much easier and faster to tie than the FG knot, hope it's performing well. Will try it on the next fishing trip (as a faster alternative to the FG knot) Thanks for sharing.
Hi there. Wow. So, is that an SC knot. It is a 30 twist Yukatan knot with 2 x half hitches and finished off with about a 12 wrap whipping knot. You must really like tying knots to try this one. Is it a 100% knot? Do you know its strength rating? Thanks.
I like this knot. But I think alot of people will tie it without proofing it first (pulling it tight longitudinally so it bites onto the mono) before closing it off with the half hitches. If this isnt done (even on FG knot) it will slip.
@@AnglerGhost , 2本の線を結ぶ結び目を探していますが、2本の線がスピナーまたはスイベルのように自由に回転できるノット（スピナーまたはスイベルに代わるノット）が欲しいのですが、アイデアを教えていただけませんか？ どうもありがとうございました！ "I'm looking for a knot that tie two lines together, but I want a knot that the two lines can freely rotate like a spinner or swivel (A knot that replaces a spinner or swivel), can you help me with an idea? Thank you very much!"
![FG Fishing Knot Tying Tool - Knot Assist 2.0 (Tie Braid to Leader Fast!) [4K]](http://i.ytimg.com/vi/OuviEBg_1NA/mqdefault.jpg)
私釣りは下手なんですがこのような丁寧にラインの結び方を紹介していただける動画は大変ありがたいです！感謝です！
ツトメン 様、コメントありがとうございます。動画見てます😄
I have been using MidKnot since 2000 , will try this knot the next time I tie the knot , thanks for sharing .
Jon Li様、コメントありがとうございます。(^_^)v
I came from PR knot to FG knot...now to SC knot. I like SC knot the best! very easy no tool needed and fast plus strong. I landed over 200lbs BFT no problem at all.
Arthur Wu様、コメントありがとうございます。200lbs Blue Fin Tuna 凄いですね！
Mine keeps pulling through
これ最強かもしれん…
色んな動画みていっぱいエギとルアー飛ばした素人ですがこれやってみます！
水温が高めの7,8,9,10がつごろにかけては、魚が波打ち際近くにいることが多い（シロギスなど）
The best knot. Thanks for sharing.
Thank you for your comment(^o^)／
@@AnglerGhost its very for strong fish like GT or TOMAN..TQ
Thanks for sharing SC knot. I like it. 👍
コメントありがとうございます。ヽ(・∀・)ノ
Interesting But Huge Knot. If you are a Bass Fisherman I suggest the Crazy Alberto knot.
Kyle Catron 様、コメントありがとうございます。(^_^)v
Looks good to me. Except for the exposed double line from the end of the wraps to the beginning before the half hitches, can be abraded more easily which can result in the knot unraveling. So i still prefer the FG; but that’s just me. 😎
It's basically a modified and added finish to a YUCATAN KNOT. The idea of all of these knots is the premise that we use a higher test strength mono leader. This is to allow the braid to imprint via deformation into the mono. This is why these all only work if the mono is sufficiently higher test than the braid tonallow for some loss of its strength via the braid imprinting and thus deformity the mono. The second part is you want to avoid doing anything to cut into the braid itself via its own line. Locking down those final lock off knots that hard may actually have it lowering its break strength. It would need to be tested. Nothing wrong with the half hitchs and finishing rizzuto knot. The issue comes from how hard you cinch it down. No more than needed to lock it as its only there to create a ramp for the guides. You need to keep to the goals and intent of each part. The locking power holding the mono and braid to each other comes from friction to the braid to mono and it reforming into the mono with the tag in self locked period. There should never be much tension from stressing the knot on the lock off of the braid.
Just remember everything you have the braid crossing over itself thus cutting into itself you create a weakness when force is applied.
Basically a Yucatan knot but increasing the number of loops from the typical 6-8 to those used in the FG 20-30. That us the major change as itmore than doubles the surface area connection between braid to mono on top of the braid being doubled over. The only thing to improve on might be to take a small amount of braid or wazed floss and doing some wraps on the mono end to protect wear thru as it reeled in thru the guide. As if that area of the loop wears it will fail the knot as it will unravel.
But it's a great knot that is not as technical on tension during loops/twists as the fg.
BTW if the leader mono is of same or lower test strength just double it.
Tony Komer 様、コメントありがとうございます。😁
Much easier and faster to tie than the FG knot,
hope it's performing well.
Will try it on the next fishing trip
(as a faster alternative to the FG knot)
Thanks for sharing.
コメントありがとうございます。参考になれば幸いです。＼(*⌒0⌒)♪
how did you go with the knot? thanks
Is It good for eyelets ??
I liked the video and also the channel..I subscribed to your channel
Gabi Fishing 様、コメントありがとうございます。(^o^)丿
Nice knot good
King Z Angler 様、コメントありがとうございます。(^_^)v
thank you master your video very helpful
Ridzuan Razak 様、コメントありがとうございます。😄
Hi there. Wow. So, is that an SC knot. It is a 30 twist Yukatan knot with 2 x half hitches and finished off with about a 12 wrap whipping knot. You must really like tying knots to try this one. Is it a 100% knot? Do you know its strength rating? Thanks.
Very good video
Sulaiman Ahmad Kamil 様、コメントありがとうございます。🤩
分かりやすかったです
なにしとん?チャンネル様、コメントありがとうございます。参考になれば幸いです(^_^)v
Nice tutorial
BabenTv Explore & Adventure 様、コメントありがとうございます。😊
Is this stronger than the FG knot? Also is that a Rizzuto finish knot? Thank you for the video!
keale s 様、コメントありがとうございます。(^_^)v、Stronger than FG Knotより強い
Rizzuto finish knotです(^_^)v
no knot is stronger than the fg knot
Looks very strong and faster and easy to do, thanks
コメントありがとうございます。ヽ(・∀・)ノ
祈願！皆様の釣行安全
ありがとうございます。ぼくベトナムから
コメントありがとうございます。ベトナムから(=^0^=)
@@AnglerGhost よろしくね
I like this knot. But I think alot of people will tie it without proofing it first (pulling it tight longitudinally so it bites onto the mono) before closing it off with the half hitches. If this isnt done (even on FG knot) it will slip.
Lionell Nel 様、コメントありがとうございます。(^o^)丿
thanks for share your knowledge. but can you write english description please?
Soner Özen 様、Thank you for your comment(^o^)／
Esse nó é bem forte
Congratulation
コメントありがとうございます。
Impossible to tie on very thin braids like #0.15 and lines 0.10mm. GT is still the way.
Vasili Puchko様、コメントありがとうございます。ヽ(^。^)ノ
Is there any deadlift test for the knot strength?
YuLi Rotten様、コメントありがとうございます。MAX95%(^o^)／
Awesome 👍👍
Sc knot 👍👍
コメントありがとうございます。o(^o^)o
@@AnglerGhost 幸運、インドネシアからの挨拶
Ça fonctionne bien, mais la solidité c'est 40% à peu près. Il manque un noeud d'arrêt.
ii ne~tsuyoi iine..👌👌👌
Noe Banas 様、コメントありがとうございます。(^_^)v
Googbye FG Knot , when outside hard to tie FG and waste time too much . Thx brother
Kuaittiwoot N. Praichit 様、コメントありがとうございます。😁
Thanks..
コメントありがとうございます。o(^o^)o
at some point i like to stop tying a knot and actually go fishing....
Steve Stringham 様、コメントありがとうございます。(^o^)丿
私の場合、最後のエンドノットは、しないかな＾＾
その代わりハーフピッチを7、8回やって焼きコブで終わりって感じです😄
南野林檎様、コメントありがとうございます。なるほど
Why not do a rizuto finish instead of half hitch
Meshal M. Sulaiman 様、コメントありがとうございます🌝
また声としゃべりが良いですね 山下達郎さんですか？^_^
コメントありがとうございます。(≧∇≦)・(；＾ω＾)o/――～>ﾟ))))彡
Join study from Indonesia
JEJAK ARTA 様、コメントありがとうございます。参考になれば幸いです(^_^)v
このラインの結束は内掛け結びと構造は同じって事ですかね？
最後にくるpeラインはスレに弱く無いですか？
PRノットの方が強い気がしますが
しまのり様、コメントありがとうございます。
構造は同じです。PEラインはスレに弱いですね、ほぐれるのでやってます。
PRノットの方が明らかに強いです
That know is a bit too much trouble for my meager skills.
Mac Prince 様、コメントありがとうございます。
👍
コメントありがとうございます。!(^^)!
ハーフヒッチ・締め込みにこれだけ時間かけるならfgのが早いですね
さくさくパンダ様、コメントありがとうございます。
Thus is 99% YUCATAN KNOT.
コメントありがとうございます。１％違いますね。
It's a Yucatan BASED knot (I would say less than 50% Yucatan), but it's A LOT improved and stronger, おめでとう, Angler Ghost, あなたは天才です 💗💗💗
@@AnglerGhost , 2本の線を結ぶ結び目を探していますが、2本の線がスピナーまたはスイベルのように自由に回転できるノット（スピナーまたはスイベルに代わるノット）が欲しいのですが、アイデアを教えていただけませんか？ どうもありがとうございました！
"I'm looking for a knot that tie two lines together, but I want a knot that the two lines can freely rotate like a spinner or swivel (A knot that replaces a spinner or swivel), can you help me with an idea? Thank you very much!"
コメントありがとうございます。(=^0^=)
Tips
th-cam.com/video/kmOV9o2liak/w-d-xo.html
I like the f-u knot better!
K Bates 様、コメントありがとうございます。(^o^)丿
J'aime!
HIMARA Fishing 様、コメントありがとうございます。(^_^)v
@@AnglerGhost 喜んで私の友人
マグロもSCノットでブレイクしませんか？
コメントありがとうございます。大丈夫です。ヽ(・∀・)ノ
そのノットとFGノットどちらが強いですか？
納豆数様、コメントありがとうございます。同じぐらいの強さです。
YUKATAN KNOT, E TENHO DITO.
Joel Silva 様、コメントありがとうございます。(^o^)丿
最後の部分はエンドノットではなくハーフヒッチの編み込み数回でも強度は変わりませんでしょうか？
坊屋春道様、コメントありがとうございます。
ハーフヒッチの編み込みでも強度は変わりません、長時間使用（５，６時間）使用後はたまにハーフヒッチが１～２回分ほぐれている場合がありますので最後はハーフヒッチ２回くぐらせがオススメです
ご回答ありがとうございます。
ちなみにですが、サワラやワラサクラスではラインブレイクしたことはありませんが、ラインブレイカーにPEとリーダーを別々に巻いてある程度の力で引っ張るとリーダー端部のコブがブレイクして抜けてしまいます。
結局はリーダーのコブがストッパーになりキマッているだけなのでしょうか？
今後の大マサやブリを掛けた時のことを思うと不安です。
@@user-z1r2 坊屋春道様、コメントありがとうございます。PEラインの締め込み不足の可能性が高そうです。
PEラインを巻き上げた後に締め込んだまま２０秒以上ホールドしてみてください、これが最も重要でPEラインの原糸の隙間が埋まり摩擦熱によるブレイクが減少致します、強度もあがります
PEにシュッ等のフッ素系保護膜もいいですよ、希にリーダーの余り糸を短くし過ぎてハーフヒッチで押してしまい抜ける場合も考えられます、ハーフヒッチ前のPEの折り返し時点の締め込みも重要です。
了解しました。
詳しいご回答ありがとうございますm(__)m
Простым русским языком обьяснил. Спасибо.
Василий Новиков 様、コメントありがとうございます。(^o^)／
Для чего такой мудреный узел? Ведь есть узлы намного проще и не хуже на разрыв.
コメントありがとうございます。ヽ(・∀・)ノ
@@AnglerGhost По-японски и по-английски не понимаю....
@@wall6234 Спасибо за ваш комментарий. ヽ (· ∀ ·) ノ
焼きコブが無いとやはり抜けてしまいますか？
yone様、コメントありがとうございます。締め込みホールドを２０秒以上すれば焼きコブ無しでもOKです
o（＾∀＾）o ﾀﾉｼｲ♪釣り
Arigato Senpai
コメントありがとうございます。
perfecto ! =)
コメントありがとうございます。ヽ(・∀・)ノ・(；＾ω＾)o/――～>ﾟ))))彡
最少25圈
最多30圈
子然一身様、コメントありがとうございます。
@@AnglerGhost 台日友好@@
…6
芝田哲男様、コメントありがとうございます