131 Mini-mill drive belt conversion kits Part 2

131 SIEG X2 mini-mill drive belt conversion kits, Grizzly G8689, Harbor Freight 44991, Hare & Forbes HM-10.
Thank you for watching
Help support my channel and become a Patron
www.patreon.co...
Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carve...
The Australian Inventors Workshop™ 2023
Sponsored By
Thunder Laser Global
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

[@philflip1963]

A nice economical belt conversion. Thanks.

[@davidgray9499]

Ho do I go about ordering you conversion kit. I just bought one at Harbor Freight and I see a lot of guys dousing this. I haven’t gotten mine yet. I will be using mine to machine down lead weights in HO and N Scale locomotives for DCC so that’s DCC Board and speaker enclosure can be added. I would like to order this kit from you.

[@altonhiggins1610]

Nice solution to get rid of at least SOME of those miserable plastic gears!

[@rogerwebb9600]

Yes they are!

[@rayfalcone6897]

hi Roger nice video,keep up the good work,i have a minor suggestion, on the 9 mil bottom plate, what i ended up doing to my milling machine.was to get a large enough collar and place it on the very edge at the bottom of the spindle .and what i did was split the collar with a small saw,and then drill and tapped a 1/4 20 tread
to compress the collar,and then i drilled the collar to insert a 3/8 hardened steel to hold the spindle when changing the drill bits or to change the tooling...well i just thought i'd pass this on.

[@redlew012]

Why do no one who makes the conversions give a link in their description Where to get them?

[@kevinmoriarity1285]

if you replace the small shaft with a tapered shaft and a liner bearing. this will make contact at a 90 deg angle(with a spring to disengage the lock). you could use the speed select lever to lock the system for tool change.

[@muharremgumus1830]

thanks for sharing

[@gangleweed]

Nice work, proof is in the pudding etc.........as this vid is 3 years old and I don't see any reference to a kit, and as I might possibly be indulging in one of these mills, basically all it consists of is a piece of 12 mm plate with 4 holes and one a lot bigger for the pulley and a couple of stand offs for the motor mount...........add another one for the motor mount and a couple of pulleys and Bob's your uncle etc. I suppose practically anyone with access to another mill.....OK, so without a mill you "could" manually hack one out of a bit of ally plate and get to the same ending.
The main thing is it's totally doable if you put your mind to it, the kit would be more user friendly for those without the know how to bang metal about.

[@robertkutz]

roger nice work looks great. bob

[@redlew012]

Why do all the kits I see only have 2 brackets holding the motor up why not add a 3rd? It just seems with such great ingenuity you would add a third for more support of the motor.

[@AnwarAlfaqeehAlhusseini]

hi
what the belt drive give the milling machine?

[@rogerwebb9600]

Thank you, for watching,
Please like, subscribe and forward the video on to a friend, Roger Clyde Webb

[@christait9761]

Hi Do you sell the kits
Can’t get a kit from overseas due to postage restrictions
Chris , Yamba NSW

[@dmackintosh9544]

Hi Roger, do have an outlet and cost for your conversion kit. I am in Scotland, UK? Thanks Donald

[@rogerwebb9600]

Thank you, for watching, Please like, subscribe and forward the video on to a friend, Australian Inventor Roger Clyde Webb;-))

[@jotdot]

where do i go to buy this mini mill kit

[@rogerwebb9600]

Hi, there is a facility on my patron pages for technical help
www.patreon.com/user?u=15079773

[@jotdot]

@@rogerwebb9600 im not looking for plans or help i want to buy the kit already made

[@superpatoche]

Please fichier STL. où je peux trouver ce fichier STL . Fusion 360 ? .merci

[@rogerwebb9600]

Thank you, for watching,
Please forward the video on to a friend, Australian Inventor Roger Clyde Webb ;-)

[@niccosaur7778]

Roger is clearly smoking crack