So where the red triangle is bro there should be an error code where the battery level is and should start with an E-00 and start like that you can see the list of errors so if it comes up with that it needs maintenance
Hello! I bought a scooter with this LCD and i have driven it for 10km and it has an M sign on the screen but the scooter functions normally. i searched and it says motor failure but the scooter is fine! what should i do to remove it?
Hi i have somthing happend to me my scooter e 10 the charge meter is decrese when i am driving in high speed then when i stop or start to drive in liw speed the charge meter goes to full can you help me
My man , i was really looking for this but I have a question in my scooter I have a bluetooth icon I have no idea hoe to enable it my scooter's model is the winner sky k5 explorer 3k watt, do you have any idea
Sorry for delay reply .. this is due to change of company.. otherwise Bluetooth on winnersky is mostly work with stereo or phone to play music or receive calls
Thanks for your support. The your LCD may be having problem of transmission. It's a sign of failed components within the LCD. I advise you replace it with a new one
Thank you for your support. Typically P1 on E10 is for head and tail lights. If they are not working you need to check the cable and connections . If they are fine but still not showing light.. then your head or tail lights are faulty
Cruise mode is on P16 or P17 you need to set the timing which will depend on how long you press the throttle and start cruising. If you want to stop cruising you just press the throttle again one time.
Hallo Jonard, thanks for your support. In regard to your Bluetooth quest, would like to explain here that most of electric scooters have in build Bluetooth program on LCD only a few have separate Bluetooth chember. So to disconnect Bluetooth program require careful disassemble of the LCD and track Bluetooth power supply then separate the socket or disconnect the red wire only.
What is the blue light at the top left that comes up when you hold the mode button ?
Oi tem como desbloquear as putras funções?
Explain please how do mode cruise in this scoteer
To Cruise... You need to go to Settings P16 and set time . It will turn automatic after holding throttle for the set timing
Hello brother, what is that blue light on the top left?
That is PASS it can not affect your scooter performance
Brother please i have proplem which is that a red alarm ..and can't move in the scooter 😢🖤
Are asking about this sign. (!)
So where the red triangle is bro there should be an error code where the battery level is and should start with an E-00 and start like that you can see the list of errors so if it comes up with that it needs maintenance
Hello! I bought a scooter with this LCD and i have driven it for 10km and it has an M sign on the screen but the scooter functions normally. i searched and it says motor failure but the scooter is fine! what should i do to remove it?
Thanks for your feedback otherwise if the scooter is working it's fine. Just make sure you engage a professional who will diagnos and find the cause
After many hours watching utube vids I've finally gotten my beast flying at 100ks hectic 😅
Wow. . Thanks for your feedback
Can you explain model number tf100?😊
Thanks a lot for your quest .. I will do it and keep you updated.
Concise and well explained. Thanks you have been able to solve problems I was not able to find in other videos.
Thanks for your support
Bonjour comment retirer l'erreur 10 svp
What I need to know is the s button not from inside screen it's a button not modes economy d & s
Thanks a lot bro for your lovely explanation about p setting 👍
Bruh can u explain p settings of xthunder
Can you make video about JX 168 throtle model in E10 scooter
Please answer me
I activate mode cruise but it don't work
The icon of cruise is on in the display but not work when i quite the turtle !!!😢😢😢
Witch app can i connect to my scooter
Currently this model you can't connect with application. But you need to upgrade or buy another model which will be compatible with application.
Bonjour les amis en français comment retirer erreur 10 svp
How do you check total mileage you’ve done, or what does odo mean
That's exactly what it is. Odometer means the total mileage of the scooter
Hello sir is there 38v only e10 or should i increase it from the P with no damage
Thank you brother. E 10 scooter works very with 48v battery
Thank you for the Info bro
Bro my kugoo m4 the voltage read 54.6 but on the screen show 54.0 i don't know this problem or normal
Thats normal because your scooter has some components that consume some amount of power
Hey brother can u tell about buttons I got m button and s button on my escooter ..
Hi i have somthing happend to me my scooter e 10 the charge meter is decrese when i am driving in high speed then when i stop or start to drive in liw speed the charge meter goes to full can you help me
my scooter dashboard keeps blinking a red light and the speedmeter is staying zero even when i move whats the problem
Sir do you have charger for E20 PRO 1,500 watts 52 volts battery 16ah?
❤❤❤❤❤
Thanks for your feedback ❤❤
Good vido.... Tak uoy
Thanks
please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you
You need to get the guide from the old one and find exactly the same model
do u guys know what cable is the speed limiter
💯💯
Thank you for the vedio.
I learned a lot. GOD BLESS.
Hello how i can find your shop location
Pls I have an issue with my scooter. If I accelerate, it will move small then show a red exclamation sign and scooter will stop and I have full charge
Check connections
Sir pag need nio ng spareparts, complete kami rito! :)
Sir how can I start directly by switch without remote
Yes but it depends on your LCD
My man , i was really looking for this but I have a question in my scooter I have a bluetooth icon I have no idea hoe to enable it my scooter's model is the winner sky k5 explorer 3k watt, do you have any idea
Sorry for delay reply .. this is due to change of company.. otherwise Bluetooth on winnersky is mostly work with stereo or phone to play music or receive calls
How do I change from kph to mph?
Hi thank u for the info but pls does it have a backwards button to go backwards
Depending with the model of your scooter you may have 2 options or sometimes it may occur as multifunction due to different motor connection
I need location in satuwa
Can I get your number because I want to bring my scooter to you, it has LCD problem
0527861029
0527861029
Any reason why my p settings go back to factory settings,when I turn scooter off/on
Thanks for your support. The your LCD may be having problem of transmission. It's a sign of failed components within the LCD. I advise you replace it with a new one
Backlight 😂
Sir question, E10 lcd not turning on, lights are working, how to fix it sir?
Thanks for your support. If LCD is not turning on,, it maybe damaged just replace it with a new one.
Hello did you manage to fix it? If so, how did you do it? Im facing the same issue.
Can you chose solid rubber tyres?
Thanks for your support ... regarding the solid tires you are supposed to choose the quality and the size you want.
Whats code of lightning my light didn't working
Thank you for your support. Typically P1 on E10 is for head and tail lights. If they are not working you need to check the cable and connections . If they are fine but still not showing light.. then your head or tail lights are faulty
@@ErnestAngo254 i really appreciate it 🙏 🙏 🙏 thnk u so much
where exactly on satwa man?
0524138029
Can you tell me start stop cruise control E10 scooter
Cruise mode is on P16 or P17 you need to set the timing which will depend on how long you press the throttle and start cruising. If you want to stop cruising you just press the throttle again one time.
@@ErnestAngo254 it has been 9 months ago, now u r replying. Anyway thanks for
@@dipsgaming7996 sorry bro for delay i have taken long to post new vedeos
I changed the company that's why I have taken long
How did you get 99 !!!!
This is the max of digital count
how to turn off bluetooth?
Hallo Jonard, thanks for your support. In regard to your Bluetooth quest, would like to explain here that most of electric scooters have in build Bluetooth program on LCD only a few have separate Bluetooth chember. So to disconnect Bluetooth program require careful disassemble of the LCD and track Bluetooth power supply then separate the socket or disconnect the red wire only.
Are you from UAE bro?
Yes
Hi bro
Yes bro