✅ LIKE AND SUBSCRIBE TO SHOW YOUR SUPPORT If you enjoyed this video, be sure to hit that like button and don’t forget to subscribe to this channel to help support its growth: th-cam.com/users/Twominutetechtutorials
Amazing feedback - thanks so much for sharing. This is EXACTLY why I started this channel. Thanks for sharing and I hope you’ve hit that subscribe button 😃😃
Hi Hannah, no worries at all. This is EXACTLY why I started this channel - to help make people’s life’s easier. Feel free to subscribe and check out my other videos. Thanks for commenting!
Hello Louise - thanks for watching the video and for the comment. Please do feel free to subscribe to show your support for my channel and be sure to check out my other MS Word videos!
Amazing!! Thanks for the message and glad you found it useful. Please feel free to subscribe to the channel to help support its growth. Plenty of other student-focussed videos on my channel and to come on the near future! Thanks!
Amazing! So glad to hear it helped you as that’s exactly why I created this channel! Thanks again for watching and be sure to check out my other videos as hopefully there are some videos there that will be as helpful. Thanks again!
I followed these instructions to change the orientation of the first page of my document. However, doing so added a "bonus" blank page after the section break that I cannot delete. Is there any way to get rid of it?
That’s maybe because you could have inserted an off page section break (or an even one). This will insert a blank page if need be depending on your document. Try to ‘next page’ section break instead. It’s difficult to help without seeing you document but I think this may be the issue!
Sorry to hear this. If you've followed the steps exactly then it should work, so best to revisit and check that you've got your section breaks in the right place etc. Obviously, without seeing your document it's hard to tell what the issue is or what's causing it, but with these steps followed to the letter, it should work fine! :)
Thanks so much, David. Really appreciate this kind feedback. If you've not done so already, be sure to check out my other videos and hit that subscribe button to support my channel. Thanks again!
@@Andy_Todd I can’t believe the variety of videos you have on your channel! You can see you’re investing a lot of time into this channel and I can see great things for the future. Keep up the good work and you’ve earned my subscription 💪🏻♥️
Amazing, thanks so much for the feedback - I’m glad it made sense. Please feel free to subscribe to my channel as I have lots planned for this year. Thanks, Andy
No problem at all. Hope you found it useful. Be sure to check out the other Word videos I have and feel free to subscribe to support the channel. I'd really appreciate it! Thanks :)
No problem at all - hope you found the tutorial useful. Be sure to check out my other tutorials and feel free to subscribe to show your support to the channel! Thanks
No worries at all, Alfie. Glad you found it useful. Be sure to check out my other short tutorials and hit that subscribe button to support the channel. Thanks!
i have done this and it does work however when adding a table of context or page no. it starts back at page 0 or page 1... this then ruins the table of context... is there a work around for this.
You should be able to click on the page numbers, then choose format page numbers from the top menu and choose ‘start at’ and select the number you want? Hope that helps!
You're welcome, Lisa! If you've not done so already, be sure to check out my other videos and hit that subscribe button to support my channel. Thanks again!
Thanks for your comment. It sounds super complicated because working with section breaks without Microsoft Word isn’t necessarily a straightforward process…hence why this query is one of the most commonly asked by Word users!
Amazing news - Glad it was useful. Please do consider subscribing to support the channel and be sure to check out my other videos. Appreicate the comment 👍
Great question. I have a video coming soon on this topic. It’s not currently possible in PP to change just one slide without changing them all, however, there is a handy little workaround you can do, which I’ll reveal soon. Be sure to sub to the channel so you’re notified when the video is live!
Yup, but remember there are usually other ways to do things in Microsoft products so there’s probably a short cut in a newer version. Will look into it!
I think it’s important to provide background information on the concepts rather than just jump straight into a tutorial. Believe it or not, not everyone watches videos to just get the information as quickly as they can. Sometimes, people want to learn the WHY not just the HOW. In my experience of teaching section breaks, explaining how they work and when to use them is critical to help the user’s understanding and make it easier for them when using them in the future. Anyway, there are many positive comments on the video, so I’ll not lose sleep over your negative comment.
lazy people like me go file then page setup then put your navigator the point you want to start then selected landscape then change the page attributes into work then selected apply section and select from this point onward, for non mac computers are more easier than this. remember this for people who look for shortcuts.. kkk
✅ LIKE AND SUBSCRIBE TO SHOW YOUR SUPPORT
If you enjoyed this video, be sure to hit that like button and don’t forget to subscribe to this channel to help support its growth: th-cam.com/users/Twominutetechtutorials
My report is due in a couple days and I just couldn't figure this out. This vid was a lifesaver. Thanks
Amazing feedback - thanks so much for sharing. This is EXACTLY why I started this channel. Thanks for sharing and I hope you’ve hit that subscribe button 😃😃
This saved my butt on a last minute assignment! Thank you so much! Microsoft is no help for Mac users!!!
Hi Hannah, no worries at all. This is EXACTLY why I started this channel - to help make people’s life’s easier. Feel free to subscribe and check out my other videos. Thanks for commenting!
GOLD! You saved me from breaking my computer in a rage
This is good news, Wal. Glad to hear it. Be sure to subscribe to support my channel, please, and feel free to check out my other MS Word videos :)
I spent ages trying to figure out how to do this, thank you so much!
Hello Louise - thanks for watching the video and for the comment. Please do feel free to subscribe to show your support for my channel and be sure to check out my other MS Word videos!
Thank you so much nothing else online was working
Glad I could help! Please do feel free to check out my other Word tutorials and be sure to sub to support the channel! Appreciate it!
you’ve saved my dissertation thank you so much❤️
Amazing!! Thanks for the message and glad you found it useful. Please feel free to subscribe to the channel to help support its growth. Plenty of other student-focussed videos on my channel and to come on the near future! Thanks!
This was so helpful, I'm so thrilled I encountered your video, it really worked and found useful, Thanks. I'm your subscriber now on.
Amazing! So glad to hear it helped you as that’s exactly why I created this channel! Thanks again for watching and be sure to check out my other videos as hopefully there are some videos there that will be as helpful. Thanks again!
Easy method. Thank you
You’re very welcome. Glad it was helpful! 👍👍
I followed these instructions to change the orientation of the first page of my document. However, doing so added a "bonus" blank page after the section break that I cannot delete. Is there any way to get rid of it?
That’s maybe because you could have inserted an off page section break (or an even one). This will insert a blank page if need be depending on your document. Try to ‘next page’ section break instead.
It’s difficult to help without seeing you document but I think this may be the issue!
Hello,
I followed your instructions, but I faced an issue with the number of pages!!!
so, it didn't work.
Thank you.
Sorry to hear this. If you've followed the steps exactly then it should work, so best to revisit and check that you've got your section breaks in the right place etc. Obviously, without seeing your document it's hard to tell what the issue is or what's causing it, but with these steps followed to the letter, it should work fine! :)
Beautifully explained. Thank you!
Thanks so much, David. Really appreciate this kind feedback. If you've not done so already, be sure to check out my other videos and hit that subscribe button to support my channel. Thanks again!
Thanks you so much !!
Not a problem glad this helped you out! Please feel free to check out my other videos and sub to channel if you want to see more! :)
thank you so much. This used to bug me a lot.
No worries at all - glad it helped. Please do feel free to check out my other tutorials as I'm sure there are plenty more other useful ones there :)
Couldn't find a video that explained how to do this on Mac OS specifically, thank you!
No problem. Glad you found it to be useful. Feel free to subscribe to my channel. Plenty more videos in the pipeline!
@@Andy_Todd I can’t believe the variety of videos you have on your channel! You can see you’re investing a lot of time into this channel and I can see great things for the future. Keep up the good work and you’ve earned my subscription 💪🏻♥️
Easy enough to follow but how do we keep our page numbers with this technique?
This was very easy to follow. Thank you so much!
Amazing, thanks so much for the feedback - I’m glad it made sense. Please feel free to subscribe to my channel as I have lots planned for this year.
Thanks,
Andy
Thank you.
No problem at all. Hope you found it useful. Be sure to check out the other Word videos I have and feel free to subscribe to support the channel. I'd really appreciate it! Thanks :)
that was clear and helpful thank you
Thanks very much, Afnan. Glad it helped. Please do consider subscribing to support the channel if you’ve not already. Thanks!
Thank you !!!
No problem at all - hope you found the tutorial useful. Be sure to check out my other tutorials and feel free to subscribe to show your support to the channel! Thanks
Brilliant thank you.
No worries at all, Alfie. Glad you found it useful. Be sure to check out my other short tutorials and hit that subscribe button to support the channel. Thanks!
i have done this and it does work however when adding a table of context or page no. it starts back at page 0 or page 1... this then ruins the table of context... is there a work around for this.
You should be able to click on the page numbers, then choose format page numbers from the top menu and choose ‘start at’ and select the number you want? Hope that helps!
Thank you :)
You're welcome, Lisa! If you've not done so already, be sure to check out my other videos and hit that subscribe button to support my channel. Thanks again!
This sounds super complicated to be honest.
Thanks for your comment. It sounds super complicated because working with section breaks without Microsoft Word isn’t necessarily a straightforward process…hence why this query is one of the most commonly asked by Word users!
@@Andy_Todd I found a much easier way 😅
@@millier9658 That's okay Millie. More than one way of doing most things in MS Word. At least you've got there in the end.
@@Andy_Todd thank you :)
Very helpful
Amazing news - Glad it was useful. Please do consider subscribing to support the channel and be sure to check out my other videos. Appreicate the comment 👍
Thanks. How can i do the same but in PowerPoint?
Great question. I have a video coming soon on this topic. It’s not currently possible in PP to change just one slide without changing them all, however, there is a handy little workaround you can do, which I’ll reveal soon. Be sure to sub to the channel so you’re notified when the video is live!
thank you
How about header page numbers. It breaks down at the portrait
Works in the same way except you need to break the link to headers before you add them.
Excellent thank you!
Glad to hear it - you're most welcome. Remember to subscribe for more videos. Would love your support to grow my channel. Thanks!
legend
Thanks, Connor. Glad you found this one useful. Feel free to take a look around my other videos and hit that subscribe button if you want to see more!
So useful, thank you:)
No problem at all, El! Thanks for your comment. Feel free to subscribe!
What a joke that it is this lengthy to perform such a simple task, come on Microsoft!
Yup, but remember there are usually other ways to do things in Microsoft products so there’s probably a short cut in a newer version. Will look into it!
you talk too much.. why just cant jump directly to the process
I think it’s important to provide background information on the concepts rather than just jump straight into a tutorial. Believe it or not, not everyone watches videos to just get the information as quickly as they can. Sometimes, people want to learn the WHY not just the HOW. In my experience of teaching section breaks, explaining how they work and when to use them is critical to help the user’s understanding and make it easier for them when using them in the future.
Anyway, there are many positive comments on the video, so I’ll not lose sleep over your negative comment.
lazy people like me go file then page setup then put your navigator the point you want to start then selected landscape then change the page attributes into work then selected apply section and select from this point onward, for non mac computers are more easier than this. remember this for people who look for shortcuts.. kkk
As the old saying goes, more than one way to skin a cat. Thanks for sharing, though!