Making a Steyr regulator tester.
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- Got a video here today on a Steyr regulator in this one we make a reg tester, we make a 2 piece one nice and simple this device allows us to check the reg pressure and set it to what we want.
- วิทยาศาสตร์และเทคโนโลยี
I really love watching you work. Excellent technique and always very informative.
No problem, Thanks for watching.
Yup.
Another damn nice video - which I personally have no use for - but the work itself is as magnificent as always. 👍🏻👍🏻👍🏻 Big thanks for the effort!
As always a great job mate. I did use an Steyr reg checker and found them very easy to use. But yours is more solid. As I said great job. 👍
Thanks much appreciated, Thanks for watching
Nice video on something a bit different.....i always like to see the tools you make up to help out .
Cheers Tim, not done any Steyr stuff so a little different but its a nice bit of kit. thanks for watching.
Excellent video, love watching things made in a lathe. Enviable skills.👍👍
Thanks always a good day when playing around on the lathe. Thanks for watching.
@@sub12airgunners Hi, As Airgun forum is down please can I ask when you will be making some more ss r10 pellet probes.
Hope you don’t mind me asking on here. 👍👍
Once again,Great video guys👍🏼
Glad you enjoyed, thanks for watching.
As always, very professional and very well explained 👍brilliant.
Thanks much appreciated. Thanks for watching
Nice work mate.
That Steyr reg appears to be less then stellar.
I've seen a fair few checked by a digital reg checker before and after a service and that reg seems set a bit high and not stable.
Around 85 bar has become the norm for most and should be very stable.
Steyr changed there washer setup a while back, so would be interesting to see what's inside.
You may have heard of Chris C who services Steyrs, he doesn't like the performance of the new washer layout that Steyr use.
He certainly wouldn't be happy with that reg, it'll get taken apart and sorted.
Yeah we took it apart and found a weird washer stack, we put it back to ()()()()() and it worked much better, then we had a look at the top of the piston, very poor finish so that got a little polish and the results were very good now the reg bounces back straight to set pressure with little to no creep, so a very easy fix not sure why Steyr don't do it from the factory, we read a little on the forums and found the 85 bar mark so we set it there, its quite had to find the set pressure without the rifle but at 85 it seemed to work better just on the bench so I can see why 85 is the goto. Thanks for watching.
Very interesting video again. The reg in my Pro X can apparently be improved by a slight rearrangement of the washers (but not the FAC arrangement)... so says Steyr UK.
We had a little play with this one and got best results with the washers like:
()()()()()
Rather than the stacked configuration. Thanks for watching.
tidy job , simple but nice details,
thank you 😁
Brilliant stuff I've been waiting for you to start on steyr rifles, I hope you are putting up one of your testing devices on ebay, i really need one 😀 👍
Good work mate
Cheers mate much appreciated, Thanks for watching.
I would love to buy one of these test rigs if you would make me one. How much would it cost and where did you purchase the gauge please? I loved watching your lathe work, such a great skill to create beautiful and useful things.
Thank you, sorry we don't make the bits to sell the gauge we got from ebay 👍
hello, good afternoon, what type of aluminum do you recommend to do this type of work? 6061 or 7075... regards
Excellent. Is this tester available?
just a question i hope you will give your opinion on i bought a snowpeak p35 in 22 it shoots 5 pence groups at 30 yards consistantly with 18.13 @ average of 849 fps after about 25 shots it clipped the baffles and destroyed them these are the factory metal baffles in the shroud no supressor. so i made replacement baffles for the shroud out of delrin and put a 9mm hole through the new baffles and after about 20 or so shots it destroyed them so i put the shroud back on with the factory end cap which has a 8mm hole in it and left the inside where the baffles go completly empty and shot one 60 shot group under 5 pence and none hit the factory end cap and i had no flyers i checked the crown and it was off slightly so i recut it in the lathe and the groups after i recut are the same size so acuracy is still there so i made a new set of baffles with a 9mm hole and after about 20 shots a pellet destroyed the new baffles i am lost and it just does not make any sense any help would be greatly appreciated!
Check the 1/2 unf on the barrel make sure its parallel with the bore, next make sure nothing is coming loose when you are shooting. Other than that I would re-cut the thread on the barrel and make a new shroud that way you can ensure its all inline. Thanks for watching.
Hi. A query about the PCD. You appear to have drilled a square hole pattern but the reg hole pattern isnt square, its slightly rectangular. they also use M3.5 bolts as standard. So how did you make it fit?
Excellent vid Jeff, thanks.
After the sale of your L2, I assume no more development work for this air rifle?
Will you continue selling the parts you designed for it?
I understand the position you took on the L2 1 way bottle valve, sad day for me though as I had already bought the Best Fittings bits! 😉
I did really like the regulator efficiency side of the plenum plugs you once showed.
Either way you are a true asset to the air rifle community Jeff and it’s great to see the enjoyment you get from all of this.
Cheers that's much appreciated, the leshiy 2 is a very interesting rifle, but it just wasn't a stable enough platform for accurate operation if that makes sense, great for what it is, but not precise enough for what we do. We are very surprised that Ed has not made his own removable bottle yet, he was very quick to appropriate the other ideas, but I am sure he is working on it so you may be able to get one in the future. The L2 parts we make will still be sold, although no new ones will be added. But we do appreciate the comment, its nice to know people are enjoying the videos. Thanks for watching.
@@sub12airgunners I'm sure it's the case for others but speaking personally, your videos are eagerly awaited and I've learned so much into the bargain.
Out of curiosity, how's things going with your self build mill?
A great job wow
Thanks much appreciated. Thanks for watching.
grate video I have Robert lane regs in all my guns that work grate
Incredible jake 👍
Cheers mate, Thanks for watching.
the first tool you use in the video may i ask what insert tool that is and what insert you were using?
Its a VCGT turning insert from YG 110302 .Thanks for watching.
awesome video great job 👍that is a different looking regulater thanks for sharing bsafe buddy 👍
Glad you liked it, yeah steyr do things a little different surprisingly small but seems to work well now its sorted. Thanks for watching.
Brilliant video again. Do you have a business doing what you do in your videos or is it a hobby? I desperately trying to find a reg testers for my walther rm8 can't find one anywhere.
I just do it for a hobby, its a bit of fun. Thanks for watching.
@@sub12airgunners keep it up one of my favourite channels.
Stunning work as always boys you make everything look easy even tho it isn’t 😁👏
I’m sure a steyr Reg checker would sale very well especially yours as it’s so well made! with steyrs being so popular aswell 👍
Cheers mate that's much appreciated. Thanks for watching
Always enjoy the videos you would make an excellent instructor for engineering
Thanks much appreciated, hopefully its interesting to people who like playing around with the airguns. Thanks for watching.
Hi where did you get the digital gauge please
Link below, Thanks for watching.
www.test-meter.co.uk/keller-eco2-digital-manometer-300bar
😁 sweet
Thanks for watching.
Nice regulator tester. Quality product as ever! 😁😁😁
Thanks much appreciated, thanks for watching.
👍as always
Thanks mate, much appreciated. Thanks for watching.
grate video I have Robert lane regs in all my guns that work grate
Can't go wrong with Lane regs got a few in my rifles and they have never let me down. Thanks for watching.