Its the charger base not the pack that needs a quick fix. The fix I’m presenting to you has risks to it. Be mindful of your safety and the safety of others.
You saved me a few $$ Thank you Sir… This worked awesome. What I did was used a small screwdriver that fit the T-20 torques screw played with it till I snapped off the little security pins so I could use a full T-20 torque head screwdriver and just unscrewed It, shorted out that little module like you showed in the video and reassembled works good… if it continues on not working and I need to open it up again then I’ll do the drill on the side and insert a screwdriver like you mentioned but for now it’s working great thank you
You saved me a few $$ Thank you Sir… This worked awesome. What I did was used a small screwdriver that fit the T-20 torques screw played with it till I snapped off the little security pins so I could use a full T-20 torque head screwdriver and just unscrewed It, shorted out that little module like you showed in the video and reassembled works good… if it continues on not working and I need to open it up again then I’ll do the drill on the side and insert a screwdriver like you mentioned but for now it’s working great thank you
The fix worked, now charging again. Will check the battery in an hour.
Be careful with those pins. I broke mine off the board. Ugh
I fixed mine . I thru it in the trash and bought a 2 cycle gas leaf blower
I did this step by step tutorial and guess what...... R.I.P charger!
Mine flashes red before I even connect the battery, and this didn't help it.
Couldn't figure out how to open the case? Had to drill and dig holes into it, eh?
Mine did that and I just reset the battery override inside the battery itself............. lots of vids on this, that's what I referred to.
Fixed
speak up man
_mumble mumble mumble_