Level 1000 Cable Management for My GT7 Playseat Trophy Simrig Sim Racing Cockpit
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- / @digitalrelay
Are your cables making a mess of your sim racing cockpit? Here's how I ran them all through the frame of my Playseat Trophy cockpit frame!
0:00 start
0:37 disassembly
1:10 drill baby drill
2:24 pull string
2:37 wiring harness mods
3:20 pull wire through
5:00 more soldering
5:41 cables through wheel stand plate
6:08 wheel stand reinstall
7:12 pedal tray removal
7:44 bottom of pedal tray
8:46 USB cable
9:54 finishing touches
10:16 plug it in!
10:36 finished project
11:21 Tips!
DISCLAIMER: Making these modifications likely will void your warranty. Proceed at your own risk!!
- Drill/drill bits - up to 9/16" (14mm)
- Files
- Dremel
- Soldering iron
- Patience
✅ Subscribe to the channel! th-cam.com/users/DigitalRela...
🎸 All music on this channel by me! Need music for a project? Contact me: ronkujawamusic.com/index.html
🏁 My Gran Turismo videos: • Gran Turismo
My gear:
(Non-affiliate links)
PS5
PS5 Camera
Logitech G29 amzn.to/3L6K7CX
Next Level Racing GT Lite amzn.to/3IyTqKb
Headset amzn.to/3qs47b1
IG: @DigitalRelay - เกม
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
The wife approval factor went up just a little
I couldn't see the point in a playseat like this until I watched this video.
With a setup like yours it makes good sense.
Nicely done.
Thank you much! An aluminum profile rig would be cool, but there's no way I'm dragging that around the house.
I've been thinking about getting the Trophy and man ... if I do ... this is happening on day one! Awesome job.
Thank you!! I love the Playseat Trophy and this mod, plus adding bass shakers, rumble pedals and wind simulation. It is a bit on the heavy side with a direct drive wheel, but worth it.
And then there's me, with my feet being snagged constantly by some cable octopus monster. Nice and clean job.
That's the kind of Sim Racing obsession I'm looking for. Great job 😁
Thank you, sir!!
Thats awesome great job
pro tip get a cone or step drillbit
Amazing, i was thinking I maybe was beeing exagerated but i'm not crazy, the result is fantastic!
Thank you! Yes, from normal viewing angles, you really don't see any cables. I have been adding more mods since this video, so there is more gear, and more cables, but I've done my best to keep the added cables hidden and everything clean. I'll have to do an update video since I've added wind simulation, bass shakers, rumble motors, and a gutted PS4 controller that I use as a headset interface on the PC.
Man, excellent video! I’m definitely doing this, thank you! Even simply mounting the transformer under the pedal plate is ingenious.. that thing is annoying when you move the seat. 👍
Thanks for the comment!! I'm super happy with how clean things are, but I have to admit with the DD wheel, power supply, and two transducers, this thing is getting a little heavy for this old man! (Still worth it though)
@@DigitalRelay hehe.. I hear you man. I’m in my 50’s and it’s not getting any lighter.
Very nice. My dad is crazy about wire management and hiding them all away
It looks so much better with those cables hidden! :)
Very nice 🏁
Looks great, giving me ideas on how to cable manage my set up, thank you
I'm glad you dig it!
amazing result!
Thank you!!
Nice Job👌, very Clean
Thank you!! 3 months later and I'm still loving it.
I have the same fanatec sticker at the same place. I don’t have the tools and more importantly skills required to do what you did, but I have everything wrapped inside a cable shield and covers all cables, so my vacuum bot won’t eat it up😂
this is amazing!
I would have added rubber grommets to those holes to make it look even cleaner.
Yep. I reasoned that the holes are pretty much out of sight unless you are looking for them, and I spent a good amount of time filing to make sure they wouldn't damage cables. If I were a more patient man, grommets would have been good.
Someone in a reddit thread asked about structural integrity, so I'll paste my response here: I did some research on this before I started drilling. The wheel base isn't an issue, as it comes with a bunch of holes in it anyway. The tube piece that holds the frame sections together directly under the wheel base is thick aluminum and I didn't feel a 9/16" would affect its integrity. I also figured, worst case, I have to replace that piece. At the bottom of the frame, I made sure to drill on a straight section, and I went right where a bracket is welded thinking that would support it well. I really don't think the holes will lead to any problems. Roll bars and cages are often drilled for various reasons, such as drain holes in the bottom to let water out. It's a great point to bring up though. There is definitely no perceptible flex after drilling the holes.
Can’t believe I’ve never seen your channel before😂 I’m here now let’s get you some subscribers. I appreciate your videos. Planning on shouting you out on some of my live streams. Currently waiting on the DD pro to be shipped hope it’s a smart upgrade from G29.
Thank you so much!! The DD Pro is a massive upgrade from the G29. I still have my G29 at my girlfriend's house, so I go back and forth on the rigs occasionally. The difference is night and day. I can still drive on the G29 rig, but it takes a little while to adjust to it, and if I happen to start to slide, it's super difficult to save it on the G29. DD feels really natural to save those moments.
@@DigitalRelay yes the slide recovery on a g29 is a pain and the brake pedal is trash for me so that’s what I’m hoping for improved performance in the fanatec wheel. Thanks again for the reply.
Clean!
Thank you!!
only thing i would do is allow for a bigger loop at the cable bend points to allow for less wear and tear, and maybe get a USB extender cable or USB hub to cover the extra distance but other than that this is an amazing idea, i might try this
All 3 cables had plenty of length to do a longer, wider bend, but I felt this was more than enough for stain relief and it looked as clean as possible. No need for USB extension as there is more than enough of a tail at the bottom to easily reach the PS5.
I thought it looked good with the wires running down the side 😂
You can use a step bit and a center punch to keep the bits from running on you.
Yes, good advice!
Looks great!!! Strange Playseat did not came with a solution to have the cables going thru the tube! How long do you have your seat now? I am thinking to buy one, but see some tear on the headrest and beside the headrest? Or is it just a light thing? I am looking for a good move around solution, as I have to take it from one room to the living room, and looking how to put some wheels on the Pedal plate area, so I can tilt it up and move around and put it tilt up in another room, due to space issue
I’ve not had tearing issues, but some areas wearing lighter. I bought it used about six months ago and love it. I thought about doing wheel too, but dragging on my floor works pretty well, and I don’t love it room to room often. If I really need to, I can hang it on bike hooks in a laundry room, but that’s pretty rare.
Awesome job on cable managment :)
How do you find the flex in this rig?
I don’t feel any while racing, but I’ve never been on an 80/20 aluminum rig to compare. The biggest drawbacks are price and little adjustability. I love it overall though.
I have been thinking of doing this if I upgrade to the new ps 15nm. I think I will take it to my brothers engineering workshop and cut 2cm holes so can thread without stripping connectors
I love this idea.
should get a sharpie and paint that raw aluminium on the holes ;)
I like that idea
so with the power connector did you just cut the original cable (because the connector is too big to pass through the holes) then just rejoin the cables?
Yes, around the 5:00 mark, you can see me soldering the wires back together.
@@DigitalRelay another question, what did you use to mount the power block to the underside of the foot tray. i couldnt see any cable ties and just curious what you did and has it stayed in place? thanks
@@1975Stevo I used 3M dual lock tape. It’s been great. I use it on all sorts of stuff.
great job a hole saw will cut aluminum no prob
What type of screws/bolts and size are those holding the GT DD Pro wheel base if you don't mind? thanks.
If I remember correctly, the allen bolts and T-nuts that slide into the wheel base came with the GT DD Pro, but I believe the bolts are a common M4.
@@DigitalRelay I bought the GT DD Pro a few days ago second hand and they came without the bolts and t-nuts so I'm trying to find out which one are the ones included with the wheel base to order them.
If you use Amazon, try a search for t-nut, or slot nut, hammer head fastener nut. Maybe get an assortment. Again, I'm almost certain they are M4. You could also try Fanatec, but I feel like that could be painful.
how come the tv doesn't have any power or hdmi cable going down though, inside the wall?
Yes, all cabling goes through the wall... power, ethernet, optical and 3 HDMI cables. There's also a pull string for future whatever.
@@DigitalRelay that sounds like some content over there big time :D
and proof that you are THE cable mgmt expert
O meu aparecia controle desligado por conta dos cabos estarem passando todos juntos . Acredito que junto com o cabo da energia não é legal passar o USB
Running USB, CAT5 and power together does risk electro magnetic interference, but I reasoned on such a short run, and with magnetic filters on the end of the USB cable I would be okay. In my case, it works with no problems. It is a valid point to consider though. Also, all those cables were running together in the first place with no problem. All I did was put them all inside an aluminum tube, so there shouldn't be much of a difference. I'm no electrical engineer though.
Idk how necessary the rubber is on those emi toroids, but as someone dealing with interference on my rig I would have just drilled the hole a little bigger 🤣
I would have drilled a bigger hole, but my drill and my bit were maxed, and I was tired of filing and dremeling metal. 😂
the ethernet that came with my dd pro set doesn't even have magnets
@@gouden88 That's interesting. I wonder how effective they are in this situation anyway. I can't recall ever seeing an ethernet cable before that had them.
Cables are so ugly. I hate them.
The only cables you can see on my desk is like 10 cm of keyboard cable and 20 cm of mouse cable.
I want a play seat as well but currently am not racing so often anymore, even though I got a VR headset for PC now. I do have a wheel stand and a chair for now that's pretty fine and close to a racing seat and seating position, and I thought about hiding the cables inside as well, but been to lazy to do so yet. 😂
You need a step bit. But good job.
Agreed. Impatience got the best of me.
But it's Fanatec, you will have to replace the wheel base in a couple of months😂
Considering the cost, I sure hope not!
@@DigitalRelay if its not the DD1 or DD2, i'm afraid to say it's a matter of time before the usb inside the shaft breaks. It is poorly designed
Ugh
@@jufejufinho A fortunate side effect of this cable management method is that I will almost never that USB-C cable or have to unplug or plug it in. Time will tell.
@@DigitalRelay the shaft comes loose mid race and the torque breaks the usb inside the shaft without even ever touching it. TH-cam is full of videos of the csl dds with this problem. That and the plastic qr on the mclaren gt wheel always break. I switched to Moza after that, way superior quality
What rig is that?
It's the Playseat Trophy. I got it used for $350, I think. For my situation, it's just about perfect. It's portable enough to slide out of the way or even move to a different room, but solid enough for direct drive. Getting in and out is similar to a go kart. It's not bad, but since I'm not a young man, my back doesn't always love it. I think it looks great too.
@@DigitalRelay thanks for the reply , yes old man here , with lower back issues lol 😂 . Guess I won’t be getting this one either.. if you find a rig that’s back pain friendly hit a brother up.
Bro why are you using a driver to drill holes?
I'll give you three guess and the first two don't count
this cockpit is for F1 right?!
Not necessarily. I'm using it for GT7.
no it's the level 9'000'000 😀
Cables management is for slow guyz 😂😂
Perhaps 😂
Yeah that's not good for your cables at all. People have issues all the time without bending them that much. Good luck, hopefully you are not replacing cables or RMAing that base soon.
Maybe it looks worse on video, because I assure you the cables are totally fine. And with this setup, the ports have zero wear and tear. I appreciate your concern. If I end up having issues, I’ll post it here.
@@DigitalRelay I guess if you aren't moving the base around at all, it should be fine.