A atv master cylinder has a brake switch built in. I’m running a raptor 700 front master on my yz450. Using a R6 headlight/signal switch. I like staying brand specific🤷🏻♂️
It’s really not all that bad. Pull the seat off and one side of the fenders and the wires can all run on that side. The hardest part is getting the control wiring all tidy
same lights, My rear turn signals work fine, fronts just barely blink and don’t fully cycle a turn signal. If I flip the wires in the relay, the fronts work perfect, but the rears stay solid lit up. Any ideas??
The rear does need to be processed through the blinker relay while the fronts do not I believe. If you hook power up to the front turn signals it should blink by itself. The rear will need the blinker relay to give power and take power. Are you using the blinker relay as a power +12 volt signal or a grounding signal?
@@joeycapooch2499upgrading stator is expensive. You can add a full wave bridge rectifier & a capacitor to run LED's if the bike is AC powered thus negating the need for a battery too.
They are the same out put usually ( make sure it has the same ratings as the old one) but it’s just newer tech. Better punch longer life better cell degeneration. If it has the same ratings then just hook it up like your old batter. Positive to positive and negative to negative
What about x 260 dirt bike can it be street legal after installed lights, turn signal, brakes light, rear view mirrors, motorcycle insurance, horn and motorcycle tag registries an can it be street legal????
You can turn any bike into a street bike. Look up your local laws but sounds like you got the gist of it. One of the big things when you get your bike inspected is street tires. For some reason they don’t like dirt tires for the street lol
Well your cheery positive happy attitude is helping - that and we are talking about dirt bikes which makes any day fantastic!
A atv master cylinder has a brake switch built in. I’m running a raptor 700 front master on my yz450. Using a R6 headlight/signal switch. I like staying brand specific🤷🏻♂️
That’s a move right there. Wish I would have known about that. Makes sense since they have a brake light on them
On my KX450I I bought a plate mount on amazon, the first time I laid it down at Walker the plate fell off and I didn’t realize it.
Well that’s not good. Got to go with the tucked plate or don’t lay it down either way
Hey man I basically bought the same setup as you but the wiring is killing me. Anyway you can make a wiring diagram if everything?
Did you figure it out?
Did u finish it?
How can I make this work without a battery only the stator
Love the led lighting kit.
Aww thank you I like that they are stealthy
I wanna add indicators and a high/low switch to my 2022 WR450F but dread the thought of having to cable manage.
It’s really not all that bad. Pull the seat off and one side of the fenders and the wires can all run on that side. The hardest part is getting the control wiring all tidy
That looks super sick man!
Could you send me a wiring diagram?
In trying to do the exact same thing on my crf 450r.
Ok I will make a video on it
same lights, My rear turn signals work fine, fronts just barely blink and don’t fully cycle a turn signal. If I flip the wires in the relay, the fronts work perfect, but the rears stay solid lit up. Any ideas??
The rear does need to be processed through the blinker relay while the fronts do not I believe. If you hook power up to the front turn signals it should blink by itself. The rear will need the blinker relay to give power and take power. Are you using the blinker relay as a power +12 volt signal or a grounding signal?
@@ModdingAddiction forgot I made this comment figured it out you’re right. Front doesn’t need relay, rears do
Great job!
Hey man if you would like to send a wire diagram it will be helpful
My yz400f has integrated front signals with the headlight and taillight
Where did u get those lights for the forks
Linky in the description
What battery should I use for this setup?
I have been using my stock battery and it has been holding up well
@@ModdingAddiction would a 12v external battery source work? I don’t have a battery on my bike and don’t want to upgrade the stator
@@ModdingAddictionhow did you hook it all up to the battery
@@joeycapooch2499upgrading stator is expensive. You can add a full wave bridge rectifier & a capacitor to run LED's if the bike is AC powered thus negating the need for a battery too.
A diagram would be nice
I will work on one
@@ModdingAddictionhave you made one yet?
@@ModdingAddictionhave you made one yet ?
@@isofly28 th-cam.com/video/E-spUIbfOGI/w-d-xo.htmlsi=N6slbQ0TJcvWQnV3 Here is the recent video going over they build
Here is the in depth video
th-cam.com/video/E-spUIbfOGI/w-d-xo.htmlsi=N6slbQ0TJcvWQnV3
do you have running brake light then when you brake it flashes
I’m curious how you pull the forks off to service them if the lights are installed above the triple clamp
I asked a Rocket Scientist. They said remove the lights and replace the 3m tape that held them on.
Did it pass Wa. Inspection?
Wiring diagram pls
I will get one out
How do I use a lipo battery
They are the same out put usually ( make sure it has the same ratings as the old one) but it’s just newer tech. Better punch longer life better cell degeneration. If it has the same ratings then just hook it up like your old batter. Positive to positive and negative to negative
What battery should I use for this setup excluding the horn
What about x 260 dirt bike can it be street legal after installed lights, turn signal, brakes light, rear view mirrors, motorcycle insurance, horn and motorcycle tag registries an can it be street legal????
You can turn any bike into a street bike. Look up your local laws but sounds like you got the gist of it. One of the big things when you get your bike inspected is street tires. For some reason they don’t like dirt tires for the street lol
Hey man how did you wire the banjo bolt can seem to figure it out
Will this work on a 2022 crf110
Yooo where that diagram at homie
Ok I will make a video on it
Good Job
What about a rmz450 2022? It doesn't have a battery but it's EFI. Some say you can plug lights because it makes DC power because it's fuel injected.
It has a battery…
It’ll handle light duty LEDs with ease. No upgrades required
I think the polarity is reversed on your horn
Ok take a step back from the camera and your hat is too large
Bwahaha but adding all this wont make your bike street legal lol js
Haha