Headlight on Pit Bike install without any batteries
ฝัง
- เผยแพร่เมื่อ 17 เม.ย. 2017
- Showing how I installed a led light bar on my SSR 125 for cheap
Parts I used:
Look at this on eBay www.ebay.com/itm/251997308274
Look at this on eBay
www.ebay.com/itm/292979199994
Look at this on eBay
www.ebay.com/itm/324111249778
My bike: 2016 SSR 125
Gold bars
Pro Taper diamond grips
Red folding levers
Gold fuel filter
Gold gas cap
Custom led headlight kit
Red and white plastics
17t front sprocket
420x104 heavy duty chain
Black exhaust wrap
Fender Extender
Stiffer front suspension - บันเทิง
Been looking at videos to try and figure out how to do this. Never understood what to do until I just watched yours! Very well done! Thank you!
You videos are different from other people normally it’s some 10 year old freaking out screaming and whining but you give out good information
Thanks so much for this vid! I'm trying to put a light on my CRF125
Always wanted to do this now I know that's for the video and clear instructions 👌🏻
Man, this is the first video that I’ve seen I’ve watched hundreds of them by now you simplified it on how to hook up the two yellow wires now my battery charges and I can get 12 V to the lights thank you sir. 🍻
Edge if the earth :) still one of my favorites
Damn good video sir!!
You just saved me a good amount of coin not having to buy the Blitzpro so thank you very much.
Did you ever get your light kit installed?
Cheers mate, your directions were spot on, mines flashy at low revs. wont be idling much though chur
Great video very helpful I ordered a ssr it’s on it’s way right now I know I’ll need a light for it this is a very affordable way to have a light thanks for your help! :)
apne kahn se li he
Thanks dude, very helpful video, I'm definitely doing this
Awesome freaking video. Thanks brother you've helped me out.
Hell yeah mine looks awesome! Thanks!
Aidan steel awesome! glad to see everything worked out right!
Wow thanks I was looking to put a light on a 25 motor in a Suzuki rm125 frame thanks for that
Volumes is my fav band! definitely gonna try this on my bike tho
Lee Thompson great band! Hope you had success with the light.
That is the best diagram iv ever seen that’s ace man 😂
Back the volumes intro 🤙🏻
Explained it well enough
i slapped a 18 inch light bar on my klx 140L for over a year now and its been working out great for me , i previously bought a light bar kit on ebay for dirtbikes but the LED light burnt out on the 2nd day ,. so i kept the button,wiring , bracket assesmbly on and jus replaced the bar. it turns night into day i kid you not, i cant even drive near the main roads with out traffic flickering their high beams at me as if too say ITS TOO DAMN BRIGHT! i made my a bracket out of a old metal tv wallmount i had laying around and it fit perfectly
Best video even for 5 pin regulators I used this info on my 200cc 4 stroke Lifan
Brother ty so much I needed this 🙏
LOL LOL LOL😁 the same LED light bar as I have and my outdoor EL-WHEELCHAIR 😂😍🥳
Going through the comments there’s been a lot of people (mostly seems to be the 140cc motors from what I’m reading) that are having dimming issues with this set up. To get around this, I used the same wiring from the rectifier to wire in a 12v rc car battery, then simply run your power from the battery to your switch and lights. Definitely has been an awesome upgrade to have a headlight on my pit bike. Thank you for the simplification in this video. A lot of the reading I did online was vague and confusing until I saw you do it
@adamsquires1775 Have you got a link to the rc battery you used? Or could you point me in the right direction? Does it have to be a 4 wire battery and what size? I’m having problems with light flashing/flickering when at idle/low rpm using the same wiring as in this video.
Thanks for that great tutorial. Do you know if you can also run a front and back light ?
Really helpful video
Top notch shed life hack fella ! Ps the led flicker and the shutter speed are out of synchronization thats the double slit effect and quantum physics right before your eyes
Thanks for the vid... I am trying to do an enduro conversion for my pit bike! This helps a lot
KeliMan good man! Hope you are successful with it!
@@rtfvox I've successfully installed a light on my bike already. The only issue i have is it being dim at idle and bright when throttle is on. Is there a way to fix it with a lower watt light or a compacitor. Everything i read online says its only possible with a battery or a ac current light setup
@@rtfvox bro check my bike now. Got to my channel. I posted a video
I'm having the same issue with the dimming and throttle, but have a rectifier in place. Can it be due to the light being 36W, I notice these smaller bars are only 18W.
@@comox_valley_gsxr I have a 18w 6" led bar with a rectifier. I may sound dumb but will it not be low beam at idle and higher beam when the throttle is on? And will it flicker?:
I like your handlebars can you give me some information on what your risers are in the handlebars thanks
Def trying this out!
Brilliant video
Got my subscription. Thanks brother
Have a up dated link to the the voltage regulator? Or the voltage rating it’s putting out? The supplied eBay link not available now..
thanks!
How did you wire them together? Did you splice them together or did you use connecters at the ends?
Do you have eletric start on your dirt bike? If so did you install it or did it come with it
Hello great info but would it woke on a yx 140 i have a lighting stator installed
is that key on power or constant... does it shut off when you turn key off? Im going to have to see what my crf110 has ... it DOES have a little 3 prong connector, I have not traced it to see what it actually is.
Gonna put it on next week
so how would u hook up a rec if you don't have those 2 yellow wire ?
i did it exactly and it gets brighter as is revs up
Battery might be closer to the weak side of its life?
I did it and it worked flawless my brake levers have light switches in them so I added a brake light too
Sam Lane glad it worked man! I want to add a brake light soon.
AverageWhiteBoi there is also a blinker kit you can get but it's a little more complicated to put in
How did you wire your brake light switch?
This video was awesome thanks
Thanks very much really good video
so if you do want a battery do the same thing but connecting to the battery and then battery to rectifier then rectifier to how ever many lights you want?
So the rectifier grounds its self through the chassis?
Have u anytime measured the output voltage coming from rectifier on positive wire. With load and without load what is the output voltage
Quite dangerous, the regulator does work somewhat but ive seen +25V coming through the regulator (up to 80V ac at the stator), it might have been a cheap regulator because it lets peaks and transients through, this is how i blew an led, adding a battery/ capacitor as a buffer will solve the problem
So it means that there are 2 voltage regulator in your bike or your just using same regulator for ignition?.
Quick question do all led bars have the same wires cause ive been looking no store shows what wires there are.
Great job
Could you run some turn signals as well as a headlight from that same rectifier?
My only question is where are those 2 yellow wires comming off of to be able to use those on the lights ...im kinda knew to bikes but I got every thing I need ...just wanting to know what are those yellow wires leading from .speciffically
Good video! Thx
Great video now I know. Have you done any mods to the air breather? I just do not like that cheap foam crap it comes with.
I have a white and yellow wire, could that affect the way it works with the pink and yellow wires?
HI , DOES ANYONE KNOW ,WHAT WILL BE THE REGULATOR KIT FOR A APOLLO RFZ 125 (CHINESE DIRT BIKE) , IN ORDER TO PUT THE LIGHT ,THANKS
What if u wanna add a tail light turn signals and a horn how would u do that ? Or do u need a battery
Is the rectifier something you added or relocation? And do you have to add one? Or can you skip that? And wire into existing wiring and leave it running as long as engine is on? Off when killed right?
Rectifier is an add on, I’m not using one and the light fades away at idle
Do you have to use the rectifier?
How would you hook it up if there was no on and off switch involved?
I did exactly as you stated but my light doesn't turn on, can you help? I have a switch that has a light in it when it turns on but nothing.
Where can I find that rectifier? Your link doesn't have it anymore
Anyone know if you could do the same wiring setup as the video only on an xmotos 125??
So is a Rectifier needed or is that just to make it not flicker and get brighter as you throttle up? Is it possible to just hook up a light and switch?
no
Just asking so I only need a switch regulator and wires I have a light but didn’t know how to connect s
What do I do if I don’t have those extra wires? To be specific I have a 2013 crf80
Does this work on the Apollo RZF?
How do I hook the taillight and headlight up to my bike if it does not have a pig tail? I have a key to start it but it is a Kickstart. Help!!!
Sick ass intro!
Is that the manual or semi auto ssr 125cc?
08:26 whats that smoke from ur exhaust bandage?
I only have a positive running off the magneto and another wire that I think is a ground, do I wire those the same as the two yellows on yours?
SyberMan Jack th-cam.com/video/x_CECrLGraI/w-d-xo.html
So what do you do when you only have one spare wire available?
This work with the Apollos?
What parts will I need specifically. The ebay links are outdated
Is there any other one for sale that will work for a ssr? If so reply with the link
Hi mate I’ve just done this to my pit bike as I had a little light bar but it’s a 30w and the light comes on as the revs raise. So just wondering what watt and volt light you used. Cheers buddy
I’m having the same issue, did you find a solution?
In case I only have one yellow wire. Coming from the stator, what then?
So can you skip the rectifier and the light switch and just run the light streight on the two unused yellow wires so it will always be on when the engine is running? Am I understanding this correctly the light will be weak on idle but will go brighter with engine revs without the rectifier.
No because the 2 yellow wires are ac and you need the rectifier to convert that to dc or you will just blow your light out.
Would it be possible run a tail light too?
Hi can i weld on my pit bikes frame where do i look for the batry its my firts time dealing with bikes now nothing
and if I have a battery that I want to run in line so i can use my light without starting the bike? does the hot to the headlight just run to the battery first. Then a lead to the toggle then to the headlight?
also wondering where to add the battery into this circuit
I did this on my Apollo RFZ It comes stock with a 3 wire stator so I put in an upgraded 5 wire stator but anyway I tried using a GY6 rectifier and I couldn't get more than 3v out of it once it was hooked up so the light wouldn't work idk if it is the rectifier or the stator but if you have any pointers I'd take them.
Apollo rfz 125?
@@jere6307 Yeah the 125
Will this work on my SSR 110 my wires are pink and yellow, thanks!
how could i add a brakelight & blinker on a ssr ? any input from anybody would be appreciated i already have the oem ssr headlight kit on
I have a green and a white wire is this possible for me to wire a led bar
Hast du einen Link? Zu dem Teilen für das Licht umzubauen?
How do you plug in more lights like signals tail light brake lights headlights turn signals horn how can I do all that without a battery how do you set yours up is it possible
Great vid, any way I could run a light and a horn without battery ?
I meant could I not I could
Hey man so I did the same thing but i just put the positive and negative wire into the harness it was bright for 2 secs then went very dim still light but not bright at all
Only get 3 v DC at idle have 7 v AC at idle
The most I get is 11v DC from the regulator when on the gas. Any suggestions?
hi,, does anyone know from where does the 2 yellow cables originally start from?? my dirt bike doesnt have any type of connection for lights. thankss
The 2 yellow wires come from your stator plate so if you haven’t got any you need to get a stator plate that’s made for lights
I know this is a older video not sure if anyone still reads the comments. But great video man, I have a ssr 110, with a extra yellow and pink wire.ordered everything from ypur description box. Ran everything like you said bit isn't working. Maybe my bike can't have a headlight or something
Bam Bino hey man, sorry to hear it isn't working. But it definitely should. Just go back over everything. Make sure all the wires are connected to the right ones. Make sure you are using thick enough gauge wire. And also, sometimes those headlights are cheap and blow really really easy. Also, the only time the light will come on is while the bike is running.
The link for the voltage regulator is different from the one in the video
Am your 900th subscribe
By the way I looked at the wattage On the light you purchased it’s not 18 W it was 36 W so the light that I have purchased that was 18 W I have to return because they shorted out. Just purchased 36 W LED light bar that’s waterproof so hopefully it to work
I need some help I connect the wires as you explained but the lights aren’t turning on
wierd thing my bike is a 125 tdr pro you can find it on ebay but the frame looks identical even though mine is from 2011
Do you think this works on Ycf pilot
Update - some cheap regulators may fry the led's due to leaking spikes/transients, to avoid this, add a 12v battery as a buffer( any type e.g. SLA nimh nicd etc)
If this doesnt work for you(dim/no light)... try connecting only one of the wires to the regulator, and ground the other ac side on the regulator to the frame, at first i followed this tutorial but turned out wrong for some stators, (i chose white wire, a bit brighter than yellow), now easily powers a 55w halogen full brightness on idle, so in the end you should have the regulator connected to one wire and a spare left floating, for testing purposes skip the regulator and use a cheap disposable halogen bulb to check your stator. if you want to stop flicker, add a cap or better yet a battery
@motor express Sold the pitbike, i didn't make a video of the whole setup as i didn't have a regulator and cba at the time, i only have a video of lighting a halogen h4 with just the stator itself, thats why it gets much brighter when revved. if you got any questions just ask.
@motor express Thats all i got: th-cam.com/video/VrBzJOfiYS8/w-d-xo.html
I have a regulator for this set up. So does this mean this is pointless to do? And will it flicker still if I have the regulator?
@@dpyz4503 On idle yes it may flicker, it works fine for regular bulbs which are immune to spikes, but it may fry electronic lights without a buffer.
So I'm getting a capacitor this week to put into it and hopefully It won't fry any bulbs or wires and have issues down the road. But it flickers at idle will get brighter with higher rpm. But if I'm cruising it'll stay bright then dim then once I down the rpm it'll get bright again 🤷 but I will let you guys know this week when it's all done and set up and when I ride to test it. But Is there a way not to blow a bulb? Will the capacitor help with that?
Is there any way to run both lights from the kit? the kit comes with 2 18w lights can those both be ran like this or do you need a battery for that?
William Montano you could try to splice them together, but I don't think there would be enough power to run both 18w lights.
Thought about how to do this so I can light up the trail like Christmas. But I mean it would hurt to try🤷😂
will a 2002 xr50 have the wires?
U explained it very well😂
I hooked it up exactly like you did my lights turn on they flicker with the motor and then when I give it throttle the lights get brighter and burnout why please help