Yes it was. I have been trying to narrow it down to finally get to the main issue. The engine is running the best it has ever since I’ve had the vehicle, but it does have some low compression due to ring wear. So it’s the best is gonna get unless I rebuild it. Just gonna drive it, the way it is, and even so it is quite fun. Thank you for subscribing and even sending me a message. May the Lord bless you
I dont recommend this method because (1) the spray? Is Flammable and (2) even if you get close to where the leak is? The engines RPM will rise up ! Do too the lack of Oxygen in the air ,I have always used just a cup of water so u can pinpoint where the leak is without faults Results and its safe no worry about catching things on fire . Note: when you use water? You can hear the water being sucked in the vacuum leak causing the engines RPM to lower or even die that's when you know you hit the right spot. 😊
Thank you .thank you and i am very very thank you for sharing helpful video clip.thank you.
You are MOST definitely welcome! Thank you for watching and sending that encouragement!
Great video i hve same problem rough cold start every morning recently getting worse and worse- thanks
Glad to help. I hope this helps you resolve the rough idle. Thank you for commenting!
Be careful that the hose clamp om the left doesn't wear a hole in that hose next to it.
Will do!
Hi thanks for sharing! great information! I hope it fixes your problems! new sub here! Was this before you found the vvt issue? thx
Yes it was. I have been trying to narrow it down to finally get to the main issue. The engine is running the best it has ever since I’ve had the vehicle, but it does have some low compression due to ring wear. So it’s the best is gonna get unless I rebuild it. Just gonna drive it, the way it is, and even so it is quite fun. Thank you for subscribing and even sending me a message. May the Lord bless you
I dont recommend this method because (1) the spray? Is Flammable and (2) even if you get close to where the leak is? The engines RPM will rise up ! Do too the lack of Oxygen in the air ,I have always used just a cup of water so u can pinpoint where the leak is without faults Results and its safe no worry about catching things on fire . Note: when you use water? You can hear the water being sucked in the vacuum leak causing the engines RPM to lower or even die that's when you know you hit the right spot. 😊
Great info on an alternative way to search for a vacuum leak. Thank you for commenting.
Smoke machines are cheap now. I paid 70 on amazon.
I’ll look into getting one
I use water
That’s a way to find a vacuum leak as well. Thanks for watching