z-seam / wipe / combing / coasting
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- For experienced users.
How to get better print results.
How to make the z-seam almost invisible.
00:00 - Intro
00:58 - Part Design Problem
01:50 - Line with 0,6
02:38 - use z-seam coordinates positioning
07:51 - "Combing" always ON
10:03 - why "wipe" & "coasting" ?
______________________________________________________________________
Kindly supporters:
paypal.me/justprinted3d
www.buymeacoffee.com/just_pri... music: Whenever
by musician: LiQWYD - วิทยาศาสตร์และเทคโนโลยี
Love it when the pen comes out and the path of the wipe distance is thoroughly explained. This kind of technical information is very valuable.
First, you speak in English extremely well so, keep please posting and even if your Cura is in German, it's pretty easy to figure it out! Second, you have a very unique way of explaining things in a way that is easy to understand, and very natural. Third, I have been on a mission to find very technical content dedicated to print quality for a special project I am working on, and I have never seen anyone to date explain Cura z-seam in this way. Good for you and Thank you for this tutorial. I am now looking at your German channel to see if I can pick up some new information on print quality.
this was 29 likesbefore i liked it :D
Excellent description of Coasting and Wiping. Now I finally know how to play with these parameters to fix my seams.
Thanks ever so much!
Love how you explain everything so clear. Hope to see more.
Thank you for explaining the setting as a noob it’s not easy to just grasp a word and understand what it means until it’s demonstrated. I have been excepting Cura’s outcomes and now I will pay more attention to the slicing to see the seems and so forth.
That was a VERY GOOD explanation! Danke!
Amazing. The knowledge that you are sharing is way more than just the typical “The Perfect Cura Profile” videos most make. I love that you were actually speaking about the physical aspect of nozzle travel when printing, and the nuances or issues involved. Your English is amazing, and you were very effective and describing the nuances and how to handle them.
What a wonderful video. Excellently explained and so well demonstrated. You have a great way to share your experience . This one for the save list, thank you for sharing.
Thank you so much for the awesome video! Very informative! Now I gotta go play around with my coasting and wipe settings.
Thank you for explaining these settings, I'm going to watch this again and adjust my profiles!
Thank you mate for these detailed explanations!
Thank you for drawing on paper. Finally understand wiping vs coasting. Wiping solved my issues, thanks!
GREAT, GREAT VIDEO! Thanks so much for this, i've been printing like crazy for 4 years and never really understood coasting and wiping! thanks, now I do! Subscribed and Liked :)
This worth a Nobel prize for science. Excellent work and explanations. Thank you for taking the time and share with the 3D world community. Be Blessed and have Success in all your actions. Salutations from France.
Awesome! Thank you for explaining it very well.
This video helped a lot. Thank you
Well done. Thank you!
Keep it up. You explain things well. Thank you
Man you have such a good content. Much more detailed and explanotory then others 3d printing channel. The only thing to make it absolutely perfect is to use english version of cura. Keep the good work!
Great explanation of coasting and wiping👍🏽
I have to hand it to you, an outstanding and not too long or covercomplicated explanation! Just a tiny issue w/ the german language in cura but we can figure out ;) Keep it going and enjoying the amazing hobby!
Hard to find a good video explaining coasting and wiping. This did a wonderful job!
Really well explained! Cheers mate!
Amazingly helpful video!
That drawing really helped. Thank you.
Thanks for the good info you shared.👍. Thanks 💕
Thanks for sharing some of the complexity in a more simple way. I don’t know what other peeps think, But I understand the generic concepts of the mechanics of what is happening, But I get lost easily with understanding the terms of names/labels of the different things very easily. Each Slicer program has different terms or meanings of different things in some slight differences of degree as well. Oh the joys of learning! 😀
I can’t even begin to understand the complexity of thought required for anyone juggling multiple languages during the thought process on top of this. Thank you for exercising the focus and discipline to put this together.
I actually understand soooo much now. Thank you.
Thank you for this. super helpfull!
Man looks like promising solutions to fix my seams. Can't wait to try it out
Great Explanations!
Great video. Your english is fine and the content is more concise than most. Keep up the good work! I look forward to more instructional videos
Ausgezeichnet! Your english is great, but your explanation was greater!! Danke!!
Very helpful. Thank you
A very informative and detailed video, I got a lot from it thank you.
Also your English is very good 👍🇦🇺😊
I will definitely try some of these settings
Great work! Thank you
Your English us better then my German. Great pointers for blobs at the seam line.
Excellent video, which I've now bookmarked in my "WTF is going on with my print and how can I improve it?" folder. Vielen Dank!
Your English is excellent, really like this video
Please produce more
thank you, great video .
Duuuude that wipe explanation was awesome, now my print in place sword doesnt fuse anymore and my zseam is almost unfindable!! got my sub
und nochmal danke auf deutsch :p
Great video and your English is absolutely fine
Great explanations, thanks, 1 more subscribers 🎉
I would really like to see a description of the the different coasting settings and how they effect the seam. I have played with every setting and I struggle see the difference any setting makes.
Thank you
Top Video. Sehr clever finde ich die Möglichkeiten, die du mit Z-Seam Relative aufgezeigt hast. So hab ich das noch nie benutzt, das hilft auf jeden Fall die Z-Seam gezielter zu positionieren. Bisher war es immer eher Trial and Error, also Einstellen und schauen was in der Preview dann angezeigt wird. Auch Combing und Wiping habe ich noch nie so einfach und schlüssig erklärt gesehen wie hier! Als Anregung noch: ich würde mir wünschen, dass du Cura auf englisch stellst, da ja erstens das Video auch englisch kommentiert ist und zweitens die deutsche Übersetzung der Settings einfach nur furchbar gezwungen klingt.
Freu mich auf weitere Videos von dir!
Excellent english, great content....ps, I built a Voron 2.4 and now hardly touch my artillery. You would love the Voron, both building and using it. Also, klipper firmware with mainsail OS control is so enjoyable to use. I only mention this because I can see how much you love 3d printing and you will be very happy if you try a Voron and Klipper.
Thank you for that suggestion.
thank you
Great video thanks. English is excellent :)
English is good... but being able to SEE the settings in english also is big for me, because im a very visual-based thinker.
Great explanation, though! 😁 Vwry helpful with an issue im having with mechanical parts and crack origin/propogation.
Thank you for explaining this! I’ve been struggling with the z seam for quite a while. Even after watching this, Im still having issues. Would it be possible to email you and show you my settings?
What version of Cura are you using?
Hey,
Your content is really appreciable, just a suggestion, if you use cura with English, It would be more easy to understand the Feature and its description.
Don't worry, your English is great! Haha
Have you tried linear advance? I just went through the calibration process, and have had some very nice results on my SV01
th-cam.com/video/WE3uIjrev90/w-d-xo.html
This is a Video on Linear advance I did in German a while ago. LA is great.
At my sidewinders printer menue I can change the k in realtime while printing.
Since the k may vary in dependence of filiament brand, speed, wall line width eg. I don't spend too much time with calibrating. K 0.13 is as a general for the sidewinder ok enough. Otherwise I just do a short test print and adjust in realtime if needed.
His English is fine, but his CURA is clearly struggling!
His English is fine, but his CURA is clearly struggling!
I am a native German as well - though I would definitely recommend going the extra 2 seconds effort of changing my cura language to English before making an English video about it...
Oh, and more important: If you get stringing on even smooth surfaces, try reducing the flow. Many printers are preconfigured to under-extrude for this reason. My printer's e-steps were configured to only 77% of the correct amount, which actually produced beautiful string-free prints, except for very long lines which then bent inwards.
So here you have it: Have much stringing? Go reduce the flow first and check for visible signs of underextrusion. If you have none, the flow reduction was your solution.
What is the best value for wiping, its hard to work out where you are in the settings as it is not in English.
I mostly use half the line width for wiping, so 0,2mm
Just a FYI,
coasting should not be on with linear advance.
yah man fuckin thx for this i really got my anycuvbic Mega x now printing more precicely and much faster wiht hor recommends.Endlich mal einer der klartext spricht und dein englisch is not that bad^^
If the part I am printing has no corners to hide the Z seam I sometimes place a decorative spine in the place where the seam would be printed so the seam gets hidden, if it is a functional part it does not matter so much especially if it is not visible in its usage.
You described the smart way to hide the seam. To have an inbuild seam position while designing the part is smart.
Isch ok 😃👌
you English is great! but if your going to talk english please put cura in english too ! great vid thumbs up and sub
I usually turn combing off completely
Zuca, by those who don't
...bet? bet what? what are we betting on?
also, speaking english but can't be fucked to change UI language? get fucked
If you talk about the "cee-seam"most probably you mean the "zet-seam" you miss pronounce the letter "z" as"c"
Yes the z seam
please use English in your setting.
switch cura's language to the tutorial language
having to run everything through a translator kind of ruins the purpose of a tutorial
Thank you for the video. I've learned a lot from it.