DSG Cloning / DSG Programming with PCM Flash.

In this video I am going to show you how to Clone / Program DSG units using other tools than VAS with ODIS.
For Cloning operations the cheapest option is PCM Flash.
On units that have immobilizer incorporated in the transmission it is not enough to Flash the correct software , you will also need to copy or modify the contents of the eeprom and ODIS can not do this for you.
Also added some tips regarding the DQ250 Cxx / Fxx units.
The tools you need can be purchased online and the best service I received so far was at Chiptuningshop. chiptuningshop.com/
If you need any files or really need my help you can get my contact details here : www.evosoft.dk/tech.html
If you need to virginize your unit you can also drop me a line , I might be able to help.
FRF / SGO to BIN and BIN to SGO / FRF for DSG conversion also possible , as a service.
www.dsgfiles.com

[@derekclarke9558]

I have a Rocco R that we have tried several boxes in, in the end went back to original and put a Brand New Genuine VW Mech in. yet we are unable to perform basic settings. no idea how to fix.

[@goldshakal5600]

THX for your Video

[@CP-kt9it]

Hi i have a Golf Gti mk6 DSG with old mechatronic 02e927770AJ and have purchased refurbished with hw code 02e927770AL.

[@amstaffsrbija4942]

I have a question: is it possible to flash a 02E927770AL mechatronics from a Golf 6r with the software from 02E927770AJ for a Golf 6 GTI? When I do it, the control unit doesn't start

[@iRamboxC4x]

Why the DQ381 401 Bootloader are not possible to tune?

[@train4905]

Exellent😊

[@Muayad666]

thank you for your precious information, i have a question, is pcmflash able to perform full read for dq381?

[@Artec12]

Thanks for sharing this valuable info. I understandr that Cxx files are not compatible with Exx/Fxx files. Can you flash an Exx file to an Fxx unit though?

[@rodknee7913]

Hi need your help

[@nandaamriza8798]

Hello guys, I have PCMFlash and can someone explain me what is the difference between EEPROM read/write and MICRO read/write? and when should I use eeprom micro to flash my box? And WHEN should I choose CLONE instead of non-clone flash?

[@MrEduard82]

Hello, I changed the manual gearbox, for a dsg dq250 in an audi a3 8P 2.0 TDi, can I use the PCM to install the original dsg software? thanks

[@lakshitnegi3187]

hi , is the troc dq200 g2 tunable?

[@giorgiomadze3494]

Hi, i'm trying to clone Dl501 Gen2 from HW: 0B5 927 156 K To 0B5 927 156 J is it possible?

[@josegarcia-th3pj]

cloning the entire unit, what about only reprogram the VIN number

[@nerminbmw99]

Coul u help me with dq250 as to aq

[@user-zr6ct5ky6n]

Hiya mate, I have ODIS engineering and I need the flash file for my new mechatronic. Can you find the exact file for my vin number if I sent it over?

[@fabrisandrea1854]

I use flex and dq200 wasn't able to clone a G to D I had to get a G , the stuff u explain is great on DQ250 black and white are not interchangeable right?

[@syedgulammohammedustad7591]

I have changed my unit from 02e927770AL to 02e927770AE and the AE unit has this error, how to solve them ,

[@tijsvorstman]

i have bosch kts560 with J2534 , can i use this hardware for cloning with PCM Flash? or do i need to buy the tactrix openport ?

[@carsonthepartsguy8751]

Greetings from the United States! My wife's 2008 A3 (CCTA EA888 Gen 1 engine, DQ250/KNC code DSG gearbox) had a failure of the DSG box due to an axle bolt coming loose and slicing a hole in the case. One of my co-workers had a 10K mile SFH code gearbox from a 2015-2017 Jetta GLI available, and he believed that we could simply swap in the mech unit from the old gearbox to the new one to make it work in the A3, and it doesn't. I can set basic settings with VCDS, but its throwing faults now for 19143/P2711 Unexpected/Implausible Mechanical Gear Disengagement and 18115/P1707 Interference in Mechatronic Module.