Total supports 2 x M.2 slots and 2 x SATA 6Gb/s ports* AMD Ryzen™ 7000 Series Desktop Processors M.2_1 slot (Key M), type 2280(supports PCIe 5.0 x4 mode) AMD X670 Chipset M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
The chipset 1 fan on my Asus X670E-i just failed. I'm having to use a clamp fan for now to blow cool air onto the chipset. I'm just holding out until the X870E chipset mobos are released later this year.
15W 정도로 알고있습니다. 마침 해당 보드로 포터블 모니터를 구동해본적이 있습니다. 정확히는 액정타블렛인데, 별도의 전원 공급없이 C to C 케이블 하나로 정상적인 동작이 가능했습니다. 번외로 B650E-I에서도 동일하게 정상적으로 동작했습니다. (16인치 QHD 액정타블렛입니다.)
Thank you, really nice content! It contains unique tests Is it possible to test DeepCool an600/ID-Cooling IS67-XT with AMD 7950x3D with different bios settings? Search something instead Noctua l12s (not enough cooling even with undervolting + with Fractal Ridge there is no space for air Cooling). Unfortunately due to the my inexperience I bought too hot CPU. I want try to buy IS-67 XT + Create something similar to duct with small seal stripes + place small fans at the bottom of the case + undervolting. Default Fractal Ridge + L12s + 7950x3D gives me 29900 - 31000 and huge throttle at 89c Undervolting can increase that numbers only to 33700 (and only with opened lid😢)
I have 7950X3D and AN600. My temperatures (scores) are a bit better and ofc it still throttles. That's actually the price you are paying for building in SFF. If you really need 100% all core load (working with media?) consider buying a Silverstone VIDA AIO, I've heard it works with Fractal Ridge. If you don't - just forget about it and enjoy your system. If you aim for gaming - with AN600 you can expect 70-80C temperatures depends on a game. Cyberpunk 2077 is the most CPU dependent games I've tried. With RT overdrive and frame gen my CPU is around of 79-81C while exploring the city and that's absolutely fine for me. I knew what I was doing. Unfortunately there is no AIO support for my Fractal Terra so that's the best I can get
If I have a chance, I will buy a 7950X3D and test it, but I don't know when it will be. (It's economically stressful because it's normal for me to buy and test products myself, not rent them.)
@@mikuruasahina3055 Thank you for information. Decided to order IS-67 XT and hope I can write my own tests when it will be delivered from AliExpress to my country (2-3 weeks). But in any case I think intake is better than exhaust when a lot of hot air cannot escape through the lid and it is then used to cool the CPU again and again. (using it vertically) I really love my SFF, first PC in 10 years, hope I can make something) P.s. Not sure that any AIO will fit with Asus ProArt 4070 TI OC (50mm and 32 left for AIO radiator and fan). But thanks for idea
@@DalraeMyo Thank you in any case. If it will be possible and it is just the idea that can be interesting for SFF users like me 🙂 I have ordered IS 67 XT and will write tests here, maybe it will be also interesting someone from your channel (but not as comfortable as your videos). Have a nice day)
So I have received my IS670XT about two weeks ago and now have some interesting information using 7950x3d Firstly I have spent that time with OCCT to find out maximum negative CO settings for each core and then make tests with different maximum PPT settings (Fractal Ridge was in vertical mount, lid was opened, with Thermalright AM5 Frame, Ridge was with small a6x25 +a4x20 fans at the bottom) Radiators: Noctua L12S ID Cooling IS-67-XT Slim Fans: Noctua A12x15 Unique ID Cooling 2200RPM 15mm fan from IS-67-XD Silverstone AirSlimmer 120 mm 15.6 mm Radiator + Fan: ID Cooling + ID Cooling - 35123 ID Cooling + Air Slimmer - 34908 ID Cooling + Noctua result was not preserved, but it was 1000-1500 points worse than the ID Cooling fan So ID Cooling Fan >= Air Slimmer > Noctua (but it is quietest) Finally I have tested Noctua radiator with an ID Cooling Fan and received 35892 That were maximum results from about 5 runs, after that CPU becomes hotter and I can receive maximum results - 400/600 points. The best Cinebench results in any case you will receive with 90 temps, there is no variant to receive low temps and max CPU performance without AIO. Decided to stay on Noctua radiator + ID Cooling Fan + my OC settings
There is incorrect information in the storage description.
M.2_1 (Chipset) : PCIe 5.0 / Type 2280
M.2_2 (CPU) : PCIe 4.0 / Type 2242/2260/2280
Total supports 2 x M.2 slots and 2 x SATA 6Gb/s ports*
AMD Ryzen™ 7000 Series Desktop Processors
M.2_1 slot (Key M), type 2280(supports PCIe 5.0 x4 mode)
AMD X670 Chipset
M.2_2 slot (Key M), type 2242/2260/2280
(supports PCIe 4.0 x4 mode)
The chipset 1 fan on my Asus X670E-i just failed. I'm having to use a clamp fan for now to blow cool air onto the chipset. I'm just holding out until the X870E chipset mobos are released later this year.
하...드디어 같은 메인보드에 같은 프로세서 사용에 부합한 쿨러를 찾았네요 ㅠㅠ 감사합니다
5200 mhz, cl46 ram? what the?
Just wondering. Did require any bios update and if yes were there any problems during installation?
The 7950X CPU was available immediately without a separate BIOS update.
안녕하세요, USB4 포트에서 전력 출력이 얼마나 되는지 혹시 아시나요?
포터블모니터에 C to C 케이블 하나만 연결해서 전력공급과 디스플레이 출력이 모두 가능한지 알고 싶습니다.
15W 정도로 알고있습니다.
마침 해당 보드로 포터블 모니터를 구동해본적이 있습니다.
정확히는 액정타블렛인데, 별도의 전원 공급없이 C to C 케이블 하나로 정상적인 동작이 가능했습니다.
번외로 B650E-I에서도 동일하게 정상적으로 동작했습니다. (16인치 QHD 액정타블렛입니다.)
안녕하세요 x670e 보드에서 JONSBO HX6200D, Thermalright AXP120-X67, ID-COOLING IS-67-XT 개인적으로 추천 하는 쿨러가 있을까요? 사실 쿨러비교 리뷰가 보고 싶긴 합니다 ^^
개인적으로 is-67-xt모델이 가장 만족스러웠습니다. HX6200D는 가장 실망스러웠구요.
yessssssssssss new cpu
does this cooler fit on aasus rog strix b660i gaming wifi mobo?
혹시 여기 들어가는 VRM쿨러 소음은 어떤가요.
거슬리진 않나요?
전원부가 60도 쯤 되면 작동하기 시작하는데, 이쯤되면 CPU쿨러가 더 열일 할때라서 CPU쿨러소리에 묻히는 정도입니다.
Thermalright AXP120-X67 쿨러도 장착이 가능할까요?
아직 장착해보질 않아서 정확히 답변드리기 애매합니다. 아마 장착 자체는 문제 없지 않을까 싶습니다.
So the TF2 will fit. Now I need an itx case were the TF2 will fit 😂
Thank you, really nice content! It contains unique tests
Is it possible to test DeepCool an600/ID-Cooling IS67-XT with AMD 7950x3D with different bios settings?
Search something instead Noctua l12s (not enough cooling even with undervolting + with Fractal Ridge there is no space for air Cooling). Unfortunately due to the my inexperience I bought too hot CPU.
I want try to buy IS-67 XT + Create something similar to duct with small seal stripes + place small fans at the bottom of the case + undervolting.
Default Fractal Ridge + L12s + 7950x3D gives me 29900 - 31000 and huge throttle at 89c
Undervolting can increase that numbers only to 33700 (and only with opened lid😢)
I have 7950X3D and AN600. My temperatures (scores) are a bit better and ofc it still throttles. That's actually the price you are paying for building in SFF. If you really need 100% all core load (working with media?) consider buying a Silverstone VIDA AIO, I've heard it works with Fractal Ridge. If you don't - just forget about it and enjoy your system. If you aim for gaming - with AN600 you can expect 70-80C temperatures depends on a game. Cyberpunk 2077 is the most CPU dependent games I've tried. With RT overdrive and frame gen my CPU is around of 79-81C while exploring the city and that's absolutely fine for me. I knew what I was doing. Unfortunately there is no AIO support for my Fractal Terra so that's the best I can get
If I have a chance, I will buy a 7950X3D and test it, but I don't know when it will be. (It's economically stressful because it's normal for me to buy and test products myself, not rent them.)
@@mikuruasahina3055 Thank you for information. Decided to order IS-67 XT and hope I can write my own tests when it will be delivered from AliExpress to my country (2-3 weeks). But in any case I think intake is better than exhaust when a lot of hot air cannot escape through the lid and it is then used to cool the CPU again and again. (using it vertically)
I really love my SFF, first PC in 10 years, hope I can make something)
P.s. Not sure that any AIO will fit with Asus ProArt 4070 TI OC (50mm and 32 left for AIO radiator and fan). But thanks for idea
@@DalraeMyo Thank you in any case. If it will be possible and it is just the idea that can be interesting for SFF users like me 🙂
I have ordered IS 67 XT and will write tests here, maybe it will be also interesting someone from your channel (but not as comfortable as your videos). Have a nice day)
So I have received my IS670XT about two weeks ago and now have some interesting information using 7950x3d
Firstly I have spent that time with OCCT to find out maximum negative CO settings for each core and then make tests with different maximum PPT settings (Fractal Ridge was in vertical mount, lid was opened, with Thermalright AM5 Frame, Ridge was with small a6x25 +a4x20 fans at the bottom)
Radiators:
Noctua L12S
ID Cooling IS-67-XT
Slim Fans:
Noctua A12x15
Unique ID Cooling 2200RPM 15mm fan from IS-67-XD
Silverstone AirSlimmer 120 mm 15.6 mm
Radiator + Fan:
ID Cooling + ID Cooling - 35123
ID Cooling + Air Slimmer - 34908
ID Cooling + Noctua result was not preserved, but it was 1000-1500 points worse than the ID Cooling fan
So ID Cooling Fan >= Air Slimmer > Noctua (but it is quietest)
Finally I have tested Noctua radiator with an ID Cooling Fan and received 35892
That were maximum results from about 5 runs, after that CPU becomes hotter and I can receive maximum results - 400/600 points. The best Cinebench results in any case you will receive with 90 temps, there is no variant to receive low temps and max CPU performance without AIO.
Decided to stay on Noctua radiator + ID Cooling Fan + my OC settings
is thermalright SI-100 compatible to this Mb?
Since it was possible to install DARKROCK TF2, which is more incompatible, I think SI-100 can be installed easily.
@@DalraeMyo how about the thermalright axp120-x67?
It looks like it can be installed without any problems.@@blindman8093
Have you lost your voice?
I'm not dubbing my voice because I'm aiming for a global channel. Please activate the subtitles.