Can't stop looking at your car bro, looks great, I got a vr6 mk4 still working on it, engine wise is almost perfect, I'm trying to get new rims and coil overs, I currently have springs but don't like them. And my interior is all messed up lol but little by little ill fix it up. Keep it up man
No, that's def just the oe 20 AE bumper with the inserts removed so he can show off his front mounted intercooler. There was no cutting involved, and "cutted" isn't even a word.
hey i have a vw gti mk4 and am wondering what wheels you have and if you have spacers? i am on coilovers and tried to lower my car today but my wheel rubbed on my coilovers when i lowered it more
Sam McCown If they are stock wheels, use 5mm spacers. Start going through forums and reading about offsets. Check your offsets as well to ensure you have the proper spacing to clear your coilover springs and nuts.
Scott Hanson okay thanks for the info man. I'm on 18" tsw ' s with two 5 mm spacers on each side. When I made this comment I thought my wheel was running my coil over but it was rubbing my fender cause I went too low. I'm buying some 17s so I can go lower
They are Miro type 111. 18x9.5 with a 215/40 front tire and 225/40 rear tire.
Gorgeous car man congrats!
Can't stop looking at your car bro, looks great, I got a vr6 mk4 still working on it, engine wise is almost perfect, I'm trying to get new rims and coil overs, I currently have springs but don't like them. And my interior is all messed up lol but little by little ill fix it up. Keep it up man
Thanks dude. Yea just keep working at it and I'm sure it will turn out good.
Nice car bro! Have the same one just red with black rims!
I like it.
Give it a cut and polish to get rid of the spider swirls you can see at 1:05 mark, will make it look even better
❤
Rim size?
It wasnt too hard but I had to trim the metal rebar behind the bumper. Yea the fronts have some good stretch but I have never had a problem.
Et 20 in the front and 22.5 in the rear., Wheels are et40 and run a 20mm spacer up front and 17.5mm in the rear.
so basically you bought 8 and a half inch wides for the front?
No rubbing. I only rolled the fenders too.
Its the VW Rack with a Thule visor
Hahah its pretty low. Im sitting around 23.5'' fender to ground. I have a skid plate that is about an inch off the ground.
You live in Mukilteo? I just picked up a 20th anniversary gti too! Great looking car dude!!
Put some WCI CC10 on it and ut will be perfect!
Awesome car, man! What roof Rack is that?
You don't get any rubbing on the fender when taking corners with 19x9.5 in the front?
Handling must be great being that low but what's it like when on a bumpy road?
Do you get any squeaking noises coming from the rear after installing those coilovers?
How hard was that inner cooler ? . And is there a lot of stretch on those ?
What size spacers are you using on your fronts? I've got the same rims, but yours are poking in the front quite a bit more. Looks good.
*****
lol, I just saw the same car and rims.. ;)
Jesse Shanks What rims are these? I have a Mk4 GTI VR6 and i want to get it some new wheels! I love these
AdrianPlaysFIFA These are the Miro 111's, 18". I got them $800 shipped.
how you made the slider? explain me! thx!!!
What size are those wheels? And brand and make?
I got it from ecstuning.
What brand ski rack is it?
where did you get your skid plate from?
Hey dude what kind of fairing did you use?
I have so many more questions , but how low is your car
What bumper is that is that the original just cutted to fit the intercooler or bought afterwards?
No, that's def just the oe 20 AE bumper with the inserts removed so he can show off his front mounted intercooler. There was no cutting involved, and "cutted" isn't even a word.
Neither is a front mounted intercollegiate, unless you know something we don't, Lol...
Mike Villiams I meant to say intercooler.. That was just another instance of autocorrect incorrectly correcting a word.
What is this setup
Offset?
hey i have a vw gti mk4 and am wondering what wheels you have and if you have spacers? i am on coilovers and tried to lower my car today but my wheel rubbed on my coilovers when i lowered it more
Sam McCown If they are stock wheels, use 5mm spacers. Start going through forums and reading about offsets. Check your offsets as well to ensure you have the proper spacing to clear your coilover springs and nuts.
Scott Hanson okay thanks for the info man. I'm on 18" tsw ' s with two 5 mm spacers on each side. When I made this comment I thought my wheel was running my coil over but it was rubbing my fender cause I went too low. I'm buying some 17s so I can go lower
If you go 17s with a super thin tire you will be going lower while making you car look like its on roller skates.
What rims are those?
what song
what are the wheels specs?
Whats ur offset ? Any spacers?
sexy wheels man what are they?
Trap Alexander I think those are xxr 530s I could be wrong
its a stock oem vw roof rack BboyJZM
Kár,hogy elrontja az összképet a tetőcsomagtartó és kilógó felnik. Egyébként egész jó lenne.
what wheels let me no please
+Nick Scolaro they are 3dsm 0.01 18"
Obzervafy they look identical
Nope no noises
Miro 111's.
Mine is about the same....horrible ride.
Kár,hogy elrontja az összképet a tetőcsomagtartó és kilógó felnik. Egyébként egész jó lenne.