GY6 CLUTCH - REVENO: DURABLE | DIFFERENT | LIGHTWEIGHT
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- BUY A REVENO CLUTCH:
www.rollingwrenchdenver.com/p...
BUY A PROBLD VARIATOR:
www.rollingwrenchdenver.com/p...
The Reveno clutch in our option is the best option for performance, hands down! When tuning your CVT you want it to be lighter and grab hard. This clutch and our ProBld Reveno variator cant be touched. This combo will give your GY6 the most performance. And the durability is there!
That`s awesome!! Thank you again for awesome video! Mr. Matt 🍻🍻
Absolutely love the reveno clutch Ive gotten for my navi, next is the cdi/coil so I can get a bit more out of the stock engine
You know what’s up! Good stuff. Thanks for the support 🖤🙏🏻💯
I just got a Tao 4 wheeler with a gy6 motor. Just now learning about them. So far it's been great. Decent power for it's size. 169? ish.
If I were to go all the way and convert my 150cc gy6 - 232cc gy6 how much am I looking at spending? Would love to keep the gy6 but the main factor for me is cost. I am considering swapping the engine but would love to build if the cost isn't far off. Love the channel!
Hi Pcx 160 from the Philippines here, huge fan btw. Very curious, what is the recommended Contra spring (in rpm) to pair with the reveno clutch?
Might be getting one soon 😁
Tire threads.. tires.. lol love how u gotta explain what tires are
Very very descriptive.
You mentioned that this clutch uses weights to determine the engagement point. Where can different tuning weights be purchased?
Will this clutch work with a buggy?
hello may i ask how to buy that act like a custom crank case? i really dont know whats the name of that part. but it gives cool design❤ im planning to buy it also
Sir I have gy6razor 200cc moped will this work for tuning? Please if yes I’ll buy these combo
@rollingwrench I have a Zuma 125 with a built 240cc. Will this handle the powa?
How much are your clutches for a nabi 110
Reveno is great! Definitely worth the investment. And the chatter is great, people who know, know. 😁😁
Heck ya! You know what’s up Spencer.
Anything for the. Kymco super 8 50x?
Hello Matt yes I have the reveno 1.0 this is an awesome clutch I have it on my 171 and my 232 and I have the reveno variator wonderful kit I love it the spring that comes with kit what is the rpm size for the spring I know it’s 8% but what is that in rpms my clutch and pulley both engages around 4000 this is the best clutch out there so far
Thanks for the support Doug. That 8% spring is lighter then stock since the way this clutch works is a lot different then traditional. I think it’s 900rpm if I remember right
hi i just got a used go kart with the long shaft gy6. it has a wire coming out of it right 1 inch the shift rod location on the passenger (right) looking from the rear. it is 3 wires yellow, green/red stripe and purple wires going to a 3 way female plug. it wasnt plugged into anything when i got it just wondering where it goes i cant find any place for it? i`m thinking a indicator for where the tranny is? on those models equipped with that..?? anybody know where that goes? thanks
How to order reveno gy6 clutch assy?
Question if u gear up a 150cc is there a way to make up for the pick up as well so I don't lose bottom end.? Make it more torque and instant with top end?
Ya, get a big bore kit and pair it with the gear up kit
Hey I’m new to the gy6 world. What performance does this increase? By how much? I get weight saved in the drive train is a boon, but real world result - faster acceleration? More fuel efficiency? Top speed?
Here is a link to find out all that info: www.rollingwrenchdenver.com/products/reveno-clutch?_pos=1&_sid=5dc1a8402&_ss=r&variant=30217305194575
@@RollingWrench I see the parts, but not stats on improvements - help me show my wife it’s not snake oil lol
Watch some of the other Reveno videos I have.
@@RollingWrench Thanks!
Türkiyeden selam Volta APEC PS5 125 cc var Uzerinde GY6 alt yapisi mevcut baga kaydırıcı ölçüleri 18×14 14gr bu parça benim makine icin olurmu 743 20 30 bando kayış var
Do I need to do anything to my revino clutch when going to a 232cc? It’s a gen 1 with 500 miles on it. Should I redo the weights? I plan on running a TFC secondary pulley with it.
Nope. You can keep it as is. The variator will need to be adjusted, but not the clutch
@@RollingWrench
Thank you 🙏
When is the case brace back in stock 🤧
Next week
@@RollingWrenchawesome! Thank you for replying
How long it last?
Mine has 3k on it with aggressive riding on a 232cc. No signs of wear. So just as long as a standard clutch, but with much better performance
@RollingWrench when you say performance do you mean it grabs harder? I have 232 as well this will be going on of I pull the trigger
@@JamesSpatt ya grabs harder. Literally no slip! And waaay less vibration. And 2.5lbs lighter than a traditional clutch. It’s the real deal
Hi~
Yo!
hi
What up