Thanks for another great video! Cheers! I feel as though content as well-crafted as what you guys do inspires people a great deal. When you teach a person valuable things you contribute to their life. It's obvious that the purpose of your videos is to share and inform. You guys do a nice job.
Dang dude! I really appreciate you 🙏. It’s nice to get validation of the time and effort I put into these videos. TH-cam is full of a lot of negativity. Thanks again
Thats nice.. Sometimes the problem of the cvt in scooters is the dragging and vibration when you take off.. that kind of a cluth asseble is very good i think.. Bec the pad doesnt slide with the bell
Just got it today! Your the man brother your products always pro!! Thank for assembling the whole clutch too. Installed on the 49cc...... little rain earlier so I wait to ride it. Love the sounds at idle!
Did you have any issues with performance after install? We installed on 2020 Ruckus, immediately the spacer was getting chewed up, and the performance was lacking, we put stock clutch back on, and performance is fine. Any suggestions. We have made other mods, and no issues. Thanks for any suggestions.
Best I have seen is a brand called LCR racing for minarelli. they are a small company like Team Cristofolini and only produce to order, but it went with the 2fast billet torque driver. The Stage6 torque control clutch is a formidable clutch too, you can adjust pretty much anything about it
I have a cheap Chinese .49cc scooter with a CF 250cc engine stuffed in it. I'm looking for a better clutch for it after a bit more power and a gear up kit. Would love to know if this clutch is made for the larger engines. The engine is still stock but with a slight advance to the timing and I'm sick of the clutch getting hot when I ride it hard. Makes it hard to do wheelies when the clutch is slipping and chattering. This design looks to be the answer toy prayers, if one is made for my engine.
I have a 150cc with a 58mm kit with a full ported and cut head to 25 and I have a total of 54 grams in the variator and it makes your bike take off a whole lot faster without messing with the gearing and the other tip is to try to make a build with no starter flywheel my current bike doesn’t have the big starter flywheel and it helps a whole lot with the acceleration
Steve from Annapolis watch out AmStar 150 we're going all out high performance camshaft Clarks shoes nice pic carburetor you really get me charged up keep up the good work thank you you got my vote
@@RollingWrench do you guys still put together Maddog icebear Chinese scooter? If you do, have you guys tried the Gen IV version? Thanks hope to hear from you soon..
Hello, I'm johnboy and new to gy6'ing i have a icebear mojo magic 150cc trike with a chain, so my question is do i also have a belt on the bike under the aluminum cover on the lefthand side. I've had to charge out carburetor. Because i didn't know about foam air filter oil and there special oil needed. The problem now is the bike seems to be jerky after a stop. It's coming from rearend and goes away once i get some speed. Is it because of chair or a bad belt under that cover. Help... Follow up question the bike has kick start but it hard and seems to not Recoil. I have bad hip on right side so i have purchased a battery jumper device if needed.
@@Sunset13118 Have fun, great fun, if you're interested, you can check out the SYM DRG158 Taiwan version. It's water-cooled, and it's a locomotive that doesn't need a "starter motor". It's very unique and has a lot of safety features.
I'll look but hope Reveno makes that clutch for the BMW C600/C650/C650GT which all use the same clutch and needs this system! It will get better as it beds in.
I just wanna share my scoot. 😊 I got Honda click 150i and I'm using a flyball 3x 12g mixed with 3x 15g all stack except that I removed the speed limiter at the ECU. From 126 kmph in a center stand to 146 kmph
That's a signature sound of reveno ppl buy Just for it that's no downside that's a plus in my book surprized a reputable mech like yourself hasn't heard of them
you should probably use the 2 face curoa wire due to its flexibility and better durability. I also just switch to the DrPulley 12.5gram. Those things sure perform better but also noiser as hell and more expensive. (4 times the price for the roller origin)
I wish they made this for a 50cc QMB139. I'm building a TaoTao 50cc. Putting in a Naraku 54.2mm big bore kit matching Naraku big valve head. And 44mm stroker crank. With a Naraku super transmission kit, and bigger carb. This clutch would be the icing on the cake.
so its basicly the reveno r whole set of convensional motorcycle clutch such as c70,but the spring replaced n relocated with roller..tq sir this is 1st time im knew this
To help with the ringing..... this thought is dependent how hot the outer "bell" gets, could you take a slice out of a lawnmower tire inner tube (think huge rubber band) and stretch it over the outer portion to act as sound dampening?
Awesome bro,git a question, if i do something similar do i need upgrade my carburetor also instead of stock carburetor, i got a 125cc nibbi racing carburetor, just curious, would i get even better results and performance, i just haven't had the time to install it,i work a lot,so far your videos have been very helpful to me understanding the gy6 engine of my new bike since im a new rider an new gesr head of having to wrench on my bike to lesrn.
is it individual roller weight or total roller weight factor that effects the variator movement? because some people mix their roller weight in one variator.
Question? Is it possible to swap a kawasaki tricity 200cc engine with a 90cc engine? I am a beginner to scooters. I wanted to start to a lower phase before going with higher speed. If it is possible, where can I buy a 90cc engine from Honda or Kawasaki? I hope that some could direct me to the right direction. Thanks in advance.
How do you know what year motor you have for your GY6? Because I have a 1pe40QMB 2 stroke *080900352*? Also pick up 1E40QMB 2T *110959887* how do I find year, make, model and piston size???
Can I put a middle of the road up grade on a 150 gy6 Chinese scooter moped long case and how do I order from rolling wrench I have the cash but need to know where to order ??? Lmk asap
I want one of these, but I have an AF16 with a corsa. I know that they make one for the DIO / AF16 but I HAVE GOT TO be able to adjust the engagement. Like its not gonna work for them to just send one with a set engagement.
would this revenue clutch work on a Chinese scoot specifically a bistro, because it has rely bad acceleration and to speed and I would like to upgrade it's performance.
Looked them up on theyre website. Which one works on the gy6? Now ive got the maddog with a 150 but plan on getting the 232 later on. Will the same one work?
What gives the performance clutch bell? is it worth paying that money? not drilled ones. these gives better grip, but the clutch wears way more. and why clutch and bell need better ventilation?
New to the scooter gearing side. I have a Gilera Runner VXR 200 that I like to do some wheele and im not really good at it. I want the bike to come up by its self, I got the polini 9roller variator, polini kV belt and the polini clutch & bell kit adjustable springs tension, but I haven't installed anything as of yet just want to know what I need or should or shouldn't I put them nee parts in? Thanks in advance
Cant find your website what is your website to order parts from you? I have a X pro 200cc saber adult scooter. I need complete clutch assembly variator kit for it. Can you help ?
460$ for these clutch.no way I think does not worth it .you have to Test a 0-60 with your old clutch and again after you put reveno clutch to see differences.I think it is not worth it.there are many ways to improve a standard clutch and clutch bell.see my videos at my channel I improve some parts for gy6
Hello great video I would like to know if I can get this kit for a 2014 Burgman 200, I would like it to engage sooner ya give me more top end, if you can help me out that would be great and thanks.
Hi man. Just out of topic question from your video. What do you call that round female socket where you attach that rear paddock stand? Wanting to remove my center stand to make my scoot lighter but will need a rear paddock stand if ever i have to fix the cvt and all. Thanks
I have a 150cc Hammerhead buggy Chinese version of the gy6. I'm definitely trying to get more grab for hill climbing. I'm still running complete stock setup. Not fun. Had to take different paths to bypass steep hills. Will be upgrading soon. Would you recommend that clutch setup for my buggy???
@@RollingWrench quick question my GF. Suzuki burgman 125 Engine no ,AF21 6699911 What bigger bore kit should I be looking for ??? Thanks I'm thinking this bike was made in Indian?
hi guys sorry for the question i know i will be mention a non gy6 i would like to upgrade my clutch for my Honda helix 250 and the gy6 is a variation of the same engine block does anyone know is will work the cutch upgrade gy6 on a helix looks almost the same
i’m trying to upgrade my 50cc ice bear mini max and I need help on parts to upgrade without using a bigbore kit. I have done some works in it I have changed the airfilter and the exhaust but the cvt is that i’m trying to upgrade and trying to derestrict it. please anyone help me
![REVENO CLUTCH: Everything You Need To Know [ RECORDED LIVE ]](http://i.ytimg.com/vi/Plrc0TlkaIo/mqdefault.jpg)
The 'rattling' dry clutch is a status symbol in motorcycling. Just like the whine of gears from gear driven cams.
well i like the functionality of the clutch but I dont like the sound.
Thanks for another great video! Cheers!
I feel as though content as well-crafted as what you guys do inspires people a great deal. When you teach a person valuable things you contribute to their life. It's obvious that the purpose of your videos is to share and inform. You guys do a nice job.
Dang dude! I really appreciate you 🙏. It’s nice to get validation of the time and effort I put into these videos. TH-cam is full of a lot of negativity. Thanks again
Thats nice.. Sometimes the problem of the cvt in scooters is the dragging and vibration when you take off.. that kind of a cluth asseble is very good i think.. Bec the pad doesnt slide with the bell
If you want a happy medium on the sliders ive seen alot of people use 3x12g and 3x14g sliders
Just got it today! Your the man brother your products always pro!! Thank for assembling the whole clutch too.
Installed on the 49cc...... little rain earlier so I wait to ride it. Love the sounds at idle!
Did you have any issues with performance after install? We installed on 2020 Ruckus, immediately the spacer was getting chewed up, and the performance was lacking, we put stock clutch back on, and performance is fine. Any suggestions. We have made other mods, and no issues. Thanks for any suggestions.
Using it for a year now, it's just jump on every start! Love it!
What do you have it on? Gy6? What kind of riding do you have?
@@RollingWrench no, it's just a Taiwan make scooter in Hong Kong daily use… the acceleration is a lot faster and it do save more fuel!
And the sound do remind a lot of older biker about the 2 stroke bike with dry clutch at the 80s
grygry777 I like the sound :-)
Right,so how much money you out.HA!Ha!
This is the kind of centrifugal clutch design that should be in-use/available within the power-sports market. (Go-carts, mini-bikes & the like) ;)
Been snoopin your vids for over a week, you are seriously inspiring me dude! You are soooo helpful..:) Thanks for the work! Aloha from Kaua'i!
Dude! I appreciate you for the support 🙏🏻💯
Best I have seen is a brand called LCR racing for minarelli. they are a small company like Team Cristofolini and only produce to order, but it went with the 2fast billet torque driver. The Stage6 torque control clutch is a formidable clutch too, you can adjust pretty much anything about it
You got the right state of mind with that ,reveno is high price,no return, costly for fine tuning
I see them on high end drag builds .. it's the same old adage : speed is a question of money, how fast do you want to go?
@@shoominati23 ,so true,
@@mickeycollins3108 Sure it will cost you a lot if you know nothing about tuning LoL.
@@user-ij9nc2rm3f I know stock clutch is just as good for slot less money.on 50cc with 5 g slider weights
I have a cheap Chinese .49cc scooter with a CF 250cc engine stuffed in it. I'm looking for a better clutch for it after a bit more power and a gear up kit. Would love to know if this clutch is made for the larger engines. The engine is still stock but with a slight advance to the timing and I'm sick of the clutch getting hot when I ride it hard. Makes it hard to do wheelies when the clutch is slipping and chattering. This design looks to be the answer toy prayers, if one is made for my engine.
Thats the real traditional Clutch! 😁
I have a 150cc with a 58mm kit with a full ported and cut head to 25 and I have a total of 54 grams in the variator and it makes your bike take off a whole lot faster without messing with the gearing and the other tip is to try to make a build with no starter flywheel my current bike doesn’t have the big starter flywheel and it helps a whole lot with the acceleration
Steve from Annapolis High Performance camshaft and carburetor clutch kit already got the header exhaust thanks
How many miles have you gotten out of the clutch now? If it still has life, how many more do you expect to get?
would love to know. 360+ is a good size financial commitment.
Steve from Annapolis watch out AmStar 150 we're going all out high performance camshaft Clarks shoes nice pic carburetor you really get me charged up keep up the good work thank you you got my vote
MR Rolling Wrench sounds like a Coleman CU 2000 Brigs & Stratton Off Road Mini Bike. Thanks for your videos U The Man.
Thanks for the support 🙏💯
@@RollingWrench do you guys still put together Maddog icebear Chinese scooter? If you do, have you guys tried the Gen IV version? Thanks hope to hear from you soon..
@@RollingWrench can this work on a 2 stroke Zuma 90cc
Hello, I'm johnboy and new to gy6'ing i have a icebear mojo magic 150cc trike with a chain, so my question is do i also have a belt on the bike under the aluminum cover on the lefthand side. I've had to charge out carburetor. Because i didn't know about foam air filter oil and there special oil needed. The problem now is the bike seems to be jerky after a stop. It's coming from rearend and goes away once i get some speed. Is it because of chair or a bad belt under that cover. Help... Follow up question the bike has kick start but it hard and seems to not
Recoil. I have bad hip on right side so i have purchased a battery jumper device if needed.
Proubley wonten have no problem seeing it if it go that fast that's perfect thumbs up my new friend
Taiwan has a lot of fun modding parts waiting for you, which will make you have a lot of fun
Mossa cvt kit
@@Sunset13118 There are many boutique modifications in Taiwan, you will like it
@@tu2933357 yeah ikr will upgrade to mossa kit on my Honda pcx
@@Sunset13118 Have fun, great fun, if you're interested, you can check out the SYM DRG158 Taiwan version. It's water-cooled, and it's a locomotive that doesn't need a "starter motor". It's very unique and has a lot of safety features.
@@tu2933357 will check out hope you have a great day thanks
I'll look but hope Reveno makes that clutch for the BMW C600/C650/C650GT which all use the same clutch and needs this system!
It will get better as it beds in.
That looks like a very sick clutch thank you for showing us that another great video can’t wait to see you next one👍👍👍👍👍
I just wanna share my scoot. 😊 I got Honda click 150i and I'm using a flyball 3x 12g mixed with 3x 15g all stack except that I removed the speed limiter at the ECU. From 126 kmph in a center stand to 146 kmph
How do you remove the limiter from the ecu ??
Is there any upgrade or modify suggestion that I can do to make my gy6 150cc scooter more fuel efficient?
That's a signature sound of reveno ppl buy Just for it that's no downside that's a plus in my book surprized a reputable mech like yourself hasn't heard of them
Been wanting to build my transmission and been In Between your fully built clutch kit and the reveno kit but you sold me on the reveno
Oh hands down Reveno. You’re gonna love it.
You need to lighten up you variator rollers and get those rpm up on take off.
I have really tall gears 30% if I removed those it would be wild!
Any videos on oil coolers?
How's the wear n tear of this clutch? Does it require frequent servicing?
I have had mine for about a year now. Everything is cool. No servicing yet
Thanks for all the 50f video's
you should probably use the 2 face curoa wire due to its flexibility and better durability. I also just switch to the DrPulley 12.5gram. Those things sure perform better but also noiser as hell and more expensive. (4 times the price for the roller origin)
I wish they made this for a 50cc QMB139. I'm building a TaoTao 50cc. Putting in a Naraku 54.2mm big bore kit matching Naraku big valve head. And 44mm stroker crank. With a Naraku super transmission kit, and bigger carb.
This clutch would be the icing on the cake.
I have a Reveno clutch for the qmb139.
Nah i love that clanking of the cluch
so its basicly the reveno r whole set of convensional motorcycle clutch such as c70,but the spring replaced n relocated with roller..tq sir this is 1st time im knew this
Yes, that is correct for the most part
To help with the ringing..... this thought is dependent how hot the outer "bell" gets, could you take a slice out of a lawnmower tire inner tube (think huge rubber band) and stretch it over the outer portion to act as sound dampening?
Ya, i think you could
Can I use this clutch on a Sym 50cc scooter, with a big bore kit? It’s a 2 stroke.
Hey Matt I just ordered this item with the contra spring. What size is the contra spring and what size rollers or sliders to start off with
My motor bike is kymco grand dink 150cc. It is ok to use the Reveno cluth?
I saw that Reveno made this clutch for the 50cc GY6 as well.
Nope! I like the "ringing" sound of that clutch!
excelente sistema de embrague!! espero encontrar disponible para burgman 150cc
is it safe the clutch axis hang on? doesnt have the transmission cover a bearing to rest the clutch axis?
Awesome bro,git a question, if i do something similar do i need upgrade my carburetor also instead of stock carburetor, i got a 125cc nibbi racing carburetor, just curious, would i get even better results and performance, i just haven't had the time to install it,i work a lot,so far your videos have been very helpful to me understanding the gy6 engine of my new bike since im a new rider an new gesr head of having to wrench on my bike to lesrn.
now when you say its a 70% increase, is that over stock or over something like a ncy or other aftermarket clutch?
Hello sir, can you feature a kawasaki curve 115cc which I believe uses a gy6 engine. But I don't know what variant of gy6 it is. Thanks in advance
How you get that. ? Because they don’t ship to United States. I’m trying to get that to my scooter
Will this new clutch kit you have work with my gy6 racer 50 I want a clutch that’s not going to slip
How many millimeters in 150cc stock carburetor comes with
is it individual roller weight or total roller weight factor that effects the variator movement? because some people mix their roller weight in one variator.
Question? Is it possible to swap a kawasaki tricity 200cc engine with a 90cc engine? I am a beginner to scooters. I wanted to start to a lower phase before going with higher speed. If it is possible, where can I buy a 90cc engine from Honda or Kawasaki? I hope that some could direct me to the right direction. Thanks in advance.
How do you know what year motor you have for your GY6? Because I have a 1pe40QMB 2 stroke
*080900352*?
Also pick up 1E40QMB 2T
*110959887* how do I find year, make, model and piston size???
Can I put a middle of the road up grade on a 150 gy6 Chinese scooter moped long case and how do I order from rolling wrench I have the cash but need to know where to order ??? Lmk asap
I want one of these, but I have an AF16 with a corsa. I know that they make one for the DIO / AF16 but I HAVE GOT TO be able to adjust the engagement. Like its not gonna work for them to just send one with a set engagement.
You will be spending more than your scooter is worth,just for clutch .Buyer beware
@@mickeycollins3108 I have about 1000 into the motor build so I'm not super worried about it
The value in in af16 isn’t monetary
This reveno bell ? Do you think sir ? It would be fit to my HONDA BEAT FI ?? I want thi stuff 😲😮😮😮
No it's not
Hi Vespa GTV300 model when using the reveno clutch jcosta suitable for use in the variator
would this revenue clutch work on a Chinese scoot specifically a bistro, because it has rely bad acceleration and to speed and I would like to upgrade it's performance.
If the engine is a qmj157 yes
Looked them up on theyre website. Which one works on the gy6? Now ive got the maddog with a 150 but plan on getting the 232 later on. Will the same one work?
whats the added speed with this clutch to a 150cc?
i have a GY6 have you heard Sinski? 125cc can you give me some flyball combination for stock engine and springs
What gives the performance clutch bell? is it worth paying that money? not drilled ones. these gives better grip, but the clutch wears way more. and why clutch and bell need better ventilation?
never mind. just ordered Doppler SX86 clutch with clutch bell :D
New to the scooter gearing side. I have a Gilera Runner VXR 200 that I like to do some wheele and im not really good at it. I want the bike to come up by its self, I got the polini 9roller variator, polini kV belt and the polini clutch & bell kit adjustable springs tension, but I haven't installed anything as of yet just want to know what I need or should or shouldn't I put them nee parts in?
Thanks in advance
Nice product 👍The Reveno clutch is from Taiwan!!!
Cant find your website what is your website to order parts from you? I have a X pro 200cc saber adult scooter. I need complete clutch assembly variator kit for it. Can you help ?
Do you put some grease before you attach that Reveno's components, sound like metal clinking in there😅
No. That’s what you call a dry clutch. Same type found in a Ducati:-)
What is the best rear shock absorber? I just got one clone ruckus and it vibrates a lot.
Sounds good u done a good job
460$ for these clutch.no way I think does not worth it .you have to Test a 0-60 with your old clutch and again after you put reveno clutch to see differences.I think it is not worth it.there are many ways to improve a standard clutch and clutch bell.see my videos at my channel I improve some parts for gy6
Doctor Motor it’s $270 on the product website for clutch and bell alone.
For this price you are nearly close To buy a 2fast cylinder , long live To the 2 strokes
MackBuilt please give me email..
im realy want buy🤪
Sounds super smooth . Price? Where can I find out!
Heck ya!! Click the link in the description
I wonder if this clutch would work for the 90cc 2 stroke ATVs I would be very interested
hi from MARTINICA island !do you know PEUGEOT 102 ? This moped had no variator but the same system with one disk !
Hello bro, you sent product to Mexico city?
I wish 2 reveno’s clutch.
One 4 bws 100 and one 4 bws 125 Of yamaha.
Hello great video I would like to know if I can get this kit for a 2014 Burgman 200, I would like it to engage sooner ya give me more top end, if you can help me out that would be great and thanks.
Hello how about gas consumption with reveno
Is their a torque spec for that nut?
Hi man. Just out of topic question from your video. What do you call that round female socket where you attach that rear paddock stand? Wanting to remove my center stand to make my scoot lighter but will need a rear paddock stand if ever i have to fix the cvt and all. Thanks
Do you have a complete kit for a 04 kymco people 250cc
I have a 150cc Hammerhead buggy Chinese version of the gy6. I'm definitely trying to get more grab for hill climbing. I'm still running complete stock setup. Not fun. Had to take different paths to bypass steep hills. Will be upgrading soon. Would you recommend that clutch setup for my buggy???
It will probably work great! But to be honest I have no experience with this clutch in a buggy
What the name of clutch spring torgue remover tool
Hmm I'm wondering if original case cover still fits.
Would stop all that sound that makes it sound like it's falling apart
Yes. If you don’twant to hear the sound simply install your CVT cover. I personally love the sound.
@@RollingWrench I'm old boy I like it quite
Southern Leyte Philippines.
Is ,f, amazing small bike riding
Best in South East Asia by far
@@johnesmer5635 put the cover one. DONE
@@RollingWrench quick question my GF. Suzuki burgman 125
Engine no ,AF21
6699911
What bigger bore kit should I be looking for ???
Thanks
I'm thinking this bike was made in
Indian?
Is it ok to install for nmax click aerox or Honda pcx?
I got a 139qmb scooter that i put the 47mm piston bbk on would this be an acceptable clutch.
please email him
Buying one next week for my icebear 😎😎
I see you're been to Thailand.
That's the place to buy your motor hot up stuff
TRUE!!
Will this clutch kit fit a 250cc 4 stroke gy6
the noise would bother me, i have enough noise on my 180cc
Im gonna get it anyways! I trust Matt's judgement on it! Thanks for the review bud!
The price of and the cost of fine tuning should bother you more
I have a brand new 150cc maddog Scooter Gen 5 . Do they have a kit for Mine?
Yea :-) www.rollingwrenchdenver.com/products/gy6-cvt-kit-reveno-clutch?ToPasteboard
Feel good to see you wear thai’s beer Chang. I’m your Fan from Thailand. Building my Ruckus from scratch
Sweet! Thanks you 🙏. I love Thailand, it’s my favorite place in the world
Do all scooter clutch have the same clutch size?
hi guys sorry for the question i know i will be mention a non gy6 i would like to upgrade my clutch for my Honda helix 250 and the gy6 is a variation of the same engine block does anyone know is will work the cutch upgrade gy6 on a helix looks almost the same
Could you still hear the clinging dry clutch sound when you cover them with stock engine cover?
You can almost not hear it with the cover installed.
i’m trying to upgrade my 50cc ice bear mini max and I need help on parts to upgrade without using a bigbore kit. I have done some works in it I have changed the airfilter and the exhaust but the cvt is that i’m trying to upgrade and trying to derestrict it. please anyone help me
We need to see it on the get
Fantastic video
Thank you 🙏🏻
Can i install on my 115cc Yamaha rayZr scooter
Your bike sure does boogie!
Great video, Matt! That clutch looks pretty awesome. I wish Reveno made a clutch like that for the stock Ruckus motor.
Thank you 🙏. Actually they do.
hey broo, what it's honda motor?
Hilmi YusufH ya, Honda GET engine
Matt why didn't you go for the heavier your sliders. The clutch seemed to grab right off the line so improve the top end.... Paul
Is there something like this for 500cc scooters? This thing is amazing and would be grate on my scooter
What scooter do you have?
@@RollingWrench Gilera nexus 500. But it has the same engine as almost any Italian 500cc
So where can i order one of these scooters online at?
That be sick if they made one for the ruckus
Working on the ruckus 50 clutch kit... sit tight
@@RollingWrench hell yeah
i'm still satisfied with my GET and nonstock exhaust
Cool stuff! Is the fuel injection module working together with the ignition system?
Thank you. They are separate units.