Why there's no sealant put on front back plates? instead you applied only grease,oil seal alone can't prevent ingress of water or dirt.through the side plates water can enter inside,why did you pull out the hall sensors?
@@DrDrei thats my next move if my sensor replacement doesnt go as easy as i hope ,could you tell me what sensors i need to order for these 50w wheels plz ,great video by the way i dont have the rust issue luckily
see that you dedicated more to cleaning perfectly but you needed to replace the stator coil, the rust was not removed and the damage to them is evident that will reduce the performance of the engine, I don't know why you were afraid to do it
Nici nu îți imaginezi cat de mult am avea nevoie de oameni că ține în Spania, din experiența personală cu un FLJ T112 și un Nami nou 2 luni avea, l-am dus în 5 ateliere unde a stat cate 3 săptămâni doar ca sa schimbe controller fata spate și nu au fost în stare. A trebuit să-l vând la un preț de nimic din cauza asta. 😢
@@DrDrei nu știu dacă vb serios sau ironic, dar la ce faci tu și la ce prețuri sunt aici la mana de lucru, mai presus că ești pro in ceea ce faci, ai face bani pt că nimeni nu se bagă în lucruri mari, aici sunt mecanici doar de Xiaomi, gen schimb o roată un display etc. Și vreau să zic că sunt atelierele arhipline, vb de 30 40 de trotinete. Timpul de așteptare e minim de o luna. Daca as avea un mod de a comunica cu tine direct să-ți trimit poze din 3 4 ateliere sa VEZI ce nebunie au astea în ateliere. O mulțime de trotinete cu un singur mecanic, și ăla știe să schimbe doar roti atât 🤦🏻
what happened to the hall sensors?
Thanks but what are the cleaning sprays, what are their brand names?
Just like new! I just love your meticulous and detailed work Sir
that rust remover could damage the copper winding insulation. be careful
This is a work of art. It's so therapeutic to look at the process.
dude you crazy with that knife. I'm bleeding just from watching.
That's how to restore an electric motor when flooded. Great video, thank you
pytanie dlaczego magnesy neodymowe śnieżysz białym prochem?
Yes very good, and the hall effect sensor you removed? This motor now will have no torque.
La espuma al final qué producto es?
Hi thanks for the video. What is the last white spray you sprayed? What does it scan?
Now that's a bearing press. I just about blew up my little hand held one doing the same job!
Good job 😊👍One question, why you dont sealant the front and backplate and just grease it ?
PERFECT REPAIR🙉
Dr. Drei imi place mult cum lucrezi
si atentia la detali
What is that blue paste on the engine cover?
For sealing?
great job! next time, though you might consider electrolytic rust removal! :) (especially for the stator!)
O intrebare se face condens in aceste motoare ?
apa intra la rulment, Soflow si restul
Excellent job 👍🇮🇪
so its safe to use brass bursh on the magnets?
Hi, nice video. I do the same for an electic bike wheel. What is the white product before reassembling?
Ceramic grease
What's the white thing you inserted to wires?
Excellent, learnt a lot. 🙏 🙏 🙏
Si cu rugina din interior/de pe spire ce ,facem?
nimic. motorul se va uza oricum in timp. eu nu l-am facut indestructibil, doar i-am prelungit durata de viata
Aluminum doesn't rust....those covers just have rust 'dust' on them.
Better remove any type of debris or the bearings won't last, and you definitely don't want that brown iron "rust dust" on the windings.
Why have you removed this rope that were holding cooper wiring?
It's there to hold the sensor plate in place, which I removed
Perfect 🏆
No hall sensors???
Que liquido usas para retirar el óxido del motor..?
Mine is Jam the same u short 2 wire. Mine is same jam I check controlar but controlar is ok. What to do next ?
Great job 👏
Why there's no sealant put on front back plates? instead you applied only grease,oil seal alone can't prevent ingress of water or dirt.through the side plates water can enter inside,why did you pull out the hall sensors?
Water can't get through the caps due to centrifugal force. The hall sensors were never used. The motor works today on a sensorless electric scooter
But how did it then get rusty inside? @@DrDrei
@@DrDrei thats my next move if my sensor replacement doesnt go as easy as i hope ,could you tell me what sensors i need to order for these 50w wheels plz ,great video by the way i dont have the rust issue luckily
Mine is Jam. It's running but jam what is the issue ? Controlar is ok
Bearings
Congrats, you just saved 38$
Me llegua un cable blanco asta ahi que no se dnd va conectado puedes ayudarme ?
hi, what is that white spray you use at the end...?
High temperature grease
Degreaser?
I don't suppose you can show me how to take the cap.of a back wheel on a lidl e scooter doc green there solid to get of
Great video!
Spray name please.
you doing soo will.
we love you.
Vaseline link.?
Bonsoir merci pour la vidéo bonne continuation à vous bonne année et santé
see that you dedicated more to cleaning perfectly but you needed to replace the stator coil, the rust was not removed and the damage to them is evident that will reduce the performance of the engine, I don't know why you were afraid to do it
The purpose is not to make the motor new again, but to make its life longer
Can you make wowgo mini 2 hub motors?
Adding grease spray is wrong, you dont spray grease on magnets or wires, plain stupid
Cam câți km rezistă un motor de trotinetă
Cat ai grija de el
La mine mere din 2017 ca uns ,nu merge pe ploaie ,parcat la adapost
io cand dau cu spray de-asta de rugina uneori miroase a cacat de om. de ce?
It’s a good as new!
Fain de unde ai luat cablu din ăla gros pt motor?
Mi a rămas de când am construit bicla, nu mai știu cum a ajuns aici
Thank you very much. You helped me a lot! :D
que pegamento se hecha alos imanes soy de peru
What's that white form kind of thing being Applied
No hall sensor wtf its Just gonna be on and off 0km/h or 45km/h nothing beetween 😂
exactly he never put em back lol
Ce e "zapada" aia?
Vaselina
damn i need ur help maybe i have smae motor maybe 72 volt
Salut, ma poți ajuta cu bobinarea unui motor de dualtron thunder? Sau cunoști pe cineva care face? Mulțumesc
Da. Scrie-mi pe Facebook sau whatsapp
I never knew aluminum rusted
Nici nu îți imaginezi cat de mult am avea nevoie de oameni că ține în Spania, din experiența personală cu un FLJ T112 și un Nami nou 2 luni avea, l-am dus în 5 ateliere unde a stat cate 3 săptămâni doar ca sa schimbe controller fata spate și nu au fost în stare. A trebuit să-l vând la un preț de nimic din cauza asta. 😢
Chiar ma gândesc sa ma mut acolo
@@DrDrei nu știu dacă vb serios sau ironic, dar la ce faci tu și la ce prețuri sunt aici la mana de lucru, mai presus că ești pro in ceea ce faci, ai face bani pt că nimeni nu se bagă în lucruri mari, aici sunt mecanici doar de Xiaomi, gen schimb o roată un display etc. Și vreau să zic că sunt atelierele arhipline, vb de 30 40 de trotinete. Timpul de așteptare e minim de o luna. Daca as avea un mod de a comunica cu tine direct să-ți trimit poze din 3 4 ateliere sa VEZI ce nebunie au astea în ateliere. O mulțime de trotinete cu un singur mecanic, și ăla știe să schimbe doar roti atât 🤦🏻
No it's property dress up fixed 😅 nice
Ft tare, satisfying af :)
200 dollars in cleaners, 600 dollars in labour, and 5000 dollars in tools, to save a 150 dollar motor, good job
Definitely a new motor at this point
Its for entertainment purposes... If you see it as a turorial... Thats your problem
You have a poor man's mentality
You just can't please some people.. why even watch the video.
Пластины статора нельзя шлифовать абразивом, вы замкнули пластины статора
ok nice
Respekt
gloves when using break cleaner m8. you will thank yourself later.
It was not spinning okei😅
Преобразователь ржавчины нельзя наносить на дюралевую крышку!
@11:13 wished i had that and many more 🤤
Misto motor! 1500 km are. Imi dau seama din filmare.
O săptămână am muncit la el
😂How much u charge for it!!
😂How much u charge for Full Survice!
Since when do magnet rust and copper wire this so fake lmfao