Big 28 👊🏾 , and I was worried about my 26mm . I’m surprise he didn’t pour the intake and exhaust . Port match up with some copper gaskets . I’m very impressed
@@scoopsf I run a 24 nibbi round slide still getting the jetting right I mean theres zero bog the plug is just sooty so it's still fat seems to love a ton of pilot jet. Anyone else run 24mm nibbis or PE24 kiehin basically the same I have both. I've ridden a kart stock predator with just major head work to make it 12.5 to 1 compression and billet rod, it doesnt have as much down low but up top it pulls hard. The 24 to me still makes it real snappy and still pulls as hard as the 26 up top since your limited by the head and cam. You only can go so big. I actually used to put smaller carbs on mod pit bike builds even my own bike to give it more bottom and tone it down some to make it more ride able. I'm currently basically sea level "north east" running 50 pilot and a 130 main.
What’s the point of a 28mm carb for stock 24mm valves? I get it if you put bigger valves in but if your running stock size valves you shouldn’t need anything more than a 24mm carb. Sweet build still
The specs of a carb goes by the cc of the engine for 150cc to 200cc 26mm carb is for those ccs alot of individuals has the wrong carb on there bike a 24mm carb is for a 140cc to 150cc engine
5:22 yo I got the same carb did u ever fix how the bike turns off after you stop after going fast I’ve played with the idle and air screw and it still does it
Check out an Inverted 22mm Intake you will solve the breaking problem it will also help you with a blow threw set up since it faces wind take you a smog pump boost it
Tune that carb and you can take off faster about 2x and have a higher top speed adjust the needle and switch jets until you find the right one and play with the air/fuel mix. You should be able to come off the line at a higher rpm and it not bog down but wind up I use that same carb they good and a good price adjust the carb and pick up about 15mph
Yo got a 30mm a few months back and some one told me to jet it down for my 224. It’s got a 38 pilot and a 115 jet. Should I go back to stock? (35 pilot 125 jet)
You could have used that blue manifold without cutting it ,Tim from small engine cams sells the boot for the pwk28 and 30 carb for 15 $ bolts right on to any manifold 😀
Would I be able to use this carb on a pred 212 with no porting? I got 26lb springs, flywheel, rod and a vm22 round slide. I wanna get this but not sure if it will work
i put my pwk 28 on and the second i pull the string it revs all the way up, i put a smaller jet and that still didnt help, tried to tweak it a little still didnt help, what should i do?
did you have to change the jets out? which main jet did you end up with. Just put a pe26 on a ghost with some mild intake porting and the flat side adapter port matched. About to put the arc flywheel on tomorrow.
Mine does nothing but surge no matter what jet or tune bro i started 1 jet at a time and still nothing, theres no leaks and idk what to do if it won't even idle
@@samaxeman123 the flat slides took me a while to figure out, they are extremely sensitive and i found out float height was an issue, my needle needed dropped and for some reason i need the smallest jets possible in mine💀 but its snappy and strong
@@MotoVoxDawg420 yeah I played with float height that helped a bit but intermittently mine will sputter and blow black smoke with the smallest throttle blip I can clear it and then ride wot no prob. Maybe Il try drop the needle down.. been too scared of leaning it out in the mid, just couldn’t see how the needle position would affect such a low throttle input it’s more mid throttle to 3/4
Maple 28mm Carburetor For 100cc 125cc 150cc 200cc 250cc racing scooter dirt bike pit ATV www.amazon.com/dp/B07G1VXW8G/ref=cm_sw_r_cp_api_glt_fabc_TE9XYYBQR9RJHDA92CVJ
Sorry young boss but your gonna have to upgrade that head while using a 28mm it's not a good idea to use a weenie pipe with that 28mm. Use at least a inch in a quarter inlet.
Secrets out! Instead of radiator hose, you can use braided vinyl hose from home depot or lowes. Do the same on my scooters/mopeds.
Big 28 👊🏾 , and I was worried about my 26mm . I’m surprise he didn’t pour the intake and exhaust . Port match up with some copper gaskets . I’m very impressed
How's your 26mm been? Would u recommend it on a stock predator with jus a governor and oil sensor delete?
@@scoopsf I run a 24 nibbi round slide still getting the jetting right I mean theres zero bog the plug is just sooty so it's still fat seems to love a ton of pilot jet. Anyone else run 24mm nibbis or PE24 kiehin basically the same I have both. I've ridden a kart stock predator with just major head work to make it 12.5 to 1 compression and billet rod, it doesnt have as much down low but up top it pulls hard. The 24 to me still makes it real snappy and still pulls as hard as the 26 up top since your limited by the head and cam. You only can go so big. I actually used to put smaller carbs on mod pit bike builds even my own bike to give it more bottom and tone it down some to make it more ride able. I'm currently basically sea level "north east" running 50 pilot and a 130 main.
Great vid! Bigger carb allows you to get from A to B quicker... Gearing or tire height changes mph...
Not true at all depending on setup.
Is a 28 to big for a stock predator 212cc?
sounds smooth too. great combo pipe and new carb. much respect
Thanks
What’s the point of a 28mm carb for stock 24mm valves? I get it if you put bigger valves in but if your running stock size valves you shouldn’t need anything more than a 24mm carb. Sweet build still
The specs of a carb goes by the cc of the engine for 150cc to 200cc 26mm carb is for those ccs alot of individuals has the wrong carb on there bike a 24mm carb is for a 140cc to 150cc engine
bouta slap on same carb but 34mm to a 212 predator hemi "deffly gonna limit the throttle or IT WILL BLOW MY ENGINE!!!"😂😂
@@vixsort4965how it go
eh i give my uh 50cc scooter 28mm carb and somehow it still runs😅
What main jet you have in that pwk28?
5:22 yo I got the same carb did u ever fix how the bike turns off after you stop after going fast I’ve played with the idle and air screw and it still does it
What size is the main jet
Check out an Inverted 22mm Intake you will solve the breaking problem it will also help you with a blow threw set up since it faces wind take you a smog pump boost it
What do all those pink hose do? Is the top one fuel?
Tune that carb and you can take off faster about 2x and have a higher top speed adjust the needle and switch jets until you find the right one and play with the air/fuel mix. You should be able to come off the line at a higher rpm and it not bog down but wind up I use that same carb they good and a good price adjust the carb and pick up about 15mph
Where do you put the top house coming out the gas tank??????
So im knew to this mini bike stuff, so i got my engine, so i need to remove the governer to add the pipe and the carb?
yup oil shut off switch also
do u have to have any pusle pumps or anything for the carb
Thats good your part came in so just slap it on and lets get ready to ride!!💯
👏🏽💪🏽🔥 shout out Ramon!
What I got 28 flatslide. Gonna add that mikuni pump next just to see I think
What’s the jet?
Yo got a 30mm a few months back and some one told me to jet it down for my 224.
It’s got a 38 pilot and a 115 jet. Should I go back to stock? (35 pilot 125 jet)
You could have used that blue manifold without cutting it ,Tim from small engine cams sells the boot for the pwk28 and 30 carb for 15 $ bolts right on to any manifold 😀
They 55 at small engine cam
Hey can you help me out with my mini bike I don’t know where to put the lines
After swapping carbs, what do you do with the governer linkage?
Would I be able to use this carb on a pred 212 with no porting? I got 26lb springs, flywheel, rod and a vm22 round slide. I wanna get this but not sure if it will work
I got a 212 with 22 lb valve springs, billet flywheel, billet rod, flat top piston, and I run a 26mm pwk without porting
Love the vids keep up the hard work ❤️❤️❤️
Where did you find your camera 📷 at to record
Bro I’m in riverside where can I get my pwk30 tune up
What do you have it jetted at?
Jz I have a question I order me a pwk 24mm did it come with an extra middle or the one that comes with it needs to be installed?
@royalJZ
What else that motor got ?? You only running that carb or billet rod bullet flywheel no gov lmk wassup in the comments
what throttle cable you use?
What size throttle cable are you using
Looks awesome but you need a filter and then re-jet the carb. That carb can suck in a lot of dirt!
Filter coming soon
Where should i order parts for my 212 engine?
Gopowersport and Omb warehouse
What jetting did you use? What jetting should I use on my 224
I have the same size and brand carb color and everything
If you from Cali run a 120 main jet and pilot jet 35 for stock engine but if you built put a 130 main jet or 135 and put a 35 pilot jet
i put my pwk 28 on and the second i pull the string it revs all the way up, i put a smaller jet and that still didnt help, tried to tweak it a little still didnt help, what should i do?
Check throttle cable it
Check idle
You might have the slide in backwards? Pull it out and turn it 180°
what gearing are you running
You got stock valve springs on there?
I run a mikuni. When you do that you lose compression.
What jet size you running on the pwk?
He drill the out but it should be 120 jet
@@RoyalJZso he drilled it out a lil bit and its a 120 jet?
You have to mess with ur air flow that’s why it’s turning off its post to stay on
did you have to change the jets out? which main jet did you end up with. Just put a pe26 on a ghost with some mild intake porting and the flat side adapter port matched. About to put the arc flywheel on tomorrow.
115 main only
Mine does nothing but surge no matter what jet or tune bro i started 1 jet at a time and still nothing, theres no leaks and idk what to do if it won't even idle
Every pwk I try does this shit.. man I don’t know how anyone gets these going.. only the roundslides work on my predator like wtf
@@samaxeman123 the flat slides took me a while to figure out, they are extremely sensitive and i found out float height was an issue, my needle needed dropped and for some reason i need the smallest jets possible in mine💀 but its snappy and strong
@@MotoVoxDawg420 yeah I played with float height that helped a bit but intermittently mine will sputter and blow black smoke with the smallest throttle blip I can clear it and then ride wot no prob. Maybe Il try drop the needle down.. been too scared of leaning it out in the mid, just couldn’t see how the needle position would affect such a low throttle input it’s more mid throttle to 3/4
Dude gps has that adapter for the carb
could i fit a 30mm carb on my stock 212?
no
@@oxnardtracks3095 yes
Can you give the link where you bought the carb
Maple 28mm Carburetor For 100cc 125cc 150cc 200cc 250cc racing scooter dirt bike pit ATV www.amazon.com/dp/B07G1VXW8G/ref=cm_sw_r_cp_api_glt_fabc_TE9XYYBQR9RJHDA92CVJ
@@RoyalJZ thanks
Do you have a flywheel
You remember what was done to your motor in this video ? 64 isn’t a bad speed
Why does the choke on my pwk not stay up ?
Probably need to tighten it or take it apart and clean it
@Elevate don’t use choke just cover carb with your hand it works better
Me and my boy loyal jz got the same cut I just got it but it really don't fit me at all and my bold head is cold af
😭😭
Hey what kind is that mikuni because I might buy one of those
This not a mikuni it’s a pwk 28mm
Ok thank you how much did it cost
@@alexytgaming4543 like 30 dollars on amazon but you can probably get one jetted for 50
What jet size is yours
@@alexytgaming4543 i think 120 but the guy who do them drill them out
Hey man is it street legal??
🔥🔥🔥
Bro you live close to me I’m from Inglewood
Nice editing skills
What?
Sorry young boss but your gonna have to upgrade that head while using a 28mm it's not a good idea to use a weenie pipe with that 28mm. Use at least a inch in a quarter inlet.
I got a stock block with a ported head and valve springs with a 28mm runs fine tops out at 63
Tiggghhtt
How much was tht carb
Amazon has them 30$
Badass
What gear ratio are you running on that bike
10 teeth on clutch and 42 rear sprocket
@@RoyalJZ thanks nice running bike
So this thing is fast
Good top speed
🔥🎥
👑👑
What school zone?
What school 😂that’s a drag strip
@@RoyalJZ 😭😭😭
@@RoyalJZ 🤣RIGHT💪
Got me a sticker..
I got a 30 mm that shit guzzles gas😭
Darn I just got a 32 so ready to install
Better get some better brakes
That instagram is taken down
Royaljz_ is the new name
First