@@Mob863 i just opened my controlller back up today and saw that the piece that sticks to the battery was disconnected , i carefully used some tape to stick it to the battery then it started working correctly.
I saw that you will soon release the paddles with trigger stops for L2 R2 but they will be clicky with a travel of 1.5mm my dream would be that you do the same thing but tactile clicky 3mm pleaseeee for bdm 030
Please let us mix-'n'-match the back paddle component and the rear controller shell! I really want a clear back shell with black back paddles. But you'd have to buy 2 to achieve that 😒
The rise4 requires soldering to map the TouchPad, rise4 v3 has an extra little cable that eliminates the need for soldering for the TouchPad Personally going for the V3
I will install eXtremeRate Remappable RISE4 V3 Remap Kit for PS5 and eXtremeRate Whole Set - Strong Version Micro Switch Clicky Hair Trigger Kit & Tactile Face Clicky Kit for PS5 Controller BDM-040, who should I install first? And another thing, can i remove the vibrators by cutting the wires?
@@AdamMohamed-um6ivYou can check the video, but I think that by isolating them they meant to tape it so they aren’t loose nor interfering near the motherboard
These foams are attached to the corners of the motherboard. When the controller shell is closed, they increase pressure, ensuring the physical connection between the circuits in the kit remains stable and less likely to loosen due to external factors.
@@TH-camAccount-qq7zj Oh the long pair forams are the backup for carbon film (main FPC) connection's poron foam at the motherboard contact points. If the original foam is not damaged, there’s no need to replace it. 4:18
The foam is placed under the original circuit to increase its height and enhance its signal connection with the motherboard. The original controller already has this foam, so it does not need to be replaced.
i got an idea for a video but can you guys sponsor it i still have my og ps5 controller from when i got it and i wanna upgrade it so i was thinking i can use your parts like the back buttons etc that would be cool
Little awkward to hold after, but pretty neat once you get used to it.
i dont use the touch pad remap myself but that new cable is an awesome addition
Thanks
Please do a clear black version!!!
so what do i do if the light doesn’t turn on?
I got the same issue, did you find a solution?
same thing happend to me
same
Same thing happened To me just contact them and they may send you a new cable but I’m not sure it’s the cables that are broke at this point
@@Mob863 i just opened my controlller back up today and saw that the piece that sticks to the battery was disconnected , i carefully used some tape to stick it to the battery then it started working correctly.
Do you know a better battery thatll last longer
I saw that you will soon release the paddles with trigger stops for L2 R2 but they will be clicky with a travel of 1.5mm my dream would be that you do the same thing but tactile clicky 3mm pleaseeee for bdm 030
Why isn’t the base metal? Where you snap the paddles in break easily!
Does this work with the bdm050?
@@dylanschuitemaker3783 apparently it does yea but alot of people including me its not working for some reason
Yes this specific one (at least on Amazon) is listed to work with the 030-040-050
Patiently waiting for the new version which has the adjustable triggers to be shown off in november sometime 😊
I was told the new version will be released at the end of this month!
Which do you guys recommend for bdm-050
The ribbon cable wont stay in the posts
what about the red wire that is in the package?
this parts can use with clear shell of BDM030?
Please let us mix-'n'-match the back paddle component and the rear controller shell!
I really want a clear back shell with black back paddles. But you'd have to buy 2 to achieve that 😒
The main circuit won’t stay in
Are the link all plastic? I want rise4 v3 metal
NVM found the RMB rise4 v3.
Hello, I would like to know the difference between Rise4 and Rise4 V3. I have BDM-30. Can you please suggest me which is the better option?
The rise4 requires soldering to map the TouchPad, rise4 v3 has an extra little cable that eliminates the need for soldering for the TouchPad
Personally going for the V3
Amazon BR ?
I will install eXtremeRate Remappable RISE4 V3 Remap Kit for PS5 and
eXtremeRate Whole Set - Strong Version Micro Switch Clicky Hair Trigger Kit & Tactile Face Clicky Kit for PS5 Controller BDM-040, who should I install first?
And another thing, can i remove the vibrators by cutting the wires?
Install the Clicky kit first. And if you don't want the vibrators, you can just cut the wires, but please isolate them with isolate tapes.
@@ExtremeRate how isolate them ?
@@AdamMohamed-um6ivYou can check the video, but I think that by isolating them they meant to tape it so they aren’t loose nor interfering near the motherboard
plz my friend , if i skipped L3 , R3 and touchpad soldering , will they work as normal after installation or will be completely dead , thx
They will work as normal! Please skip soldering, it will just be fine.🤞🤞
@@ExtremeRate i did , works great , thx
What is the difference between the older model?
The main upgrade is that now you can map the touchpad buttons without soldering, and the power supply to the back buttons will be more stable.
@@ExtremeRate oh okay, that's new, thank you so much
@@YTPabloTV You are most welcome
what is the pair of foam tape for?
These foams are attached to the corners of the motherboard. When the controller shell is closed, they increase pressure, ensuring the physical connection between the circuits in the kit remains stable and less likely to loosen due to external factors.
@@ExtremeRate no I mean the thicker foam long ones, you get two on 1 sticker.
@@TH-camAccount-qq7zj Oh the long pair forams are the backup for carbon film (main FPC) connection's poron foam at the motherboard contact points. If the original foam is not damaged, there’s no need to replace it. 4:18
The foam is placed under the original circuit to increase its height and enhance its signal connection with the motherboard. The original controller already has this foam, so it does not need to be replaced.
i got an idea for a video but can you guys sponsor it i still have my og ps5 controller from when i got it and i wanna upgrade it so i was thinking i can use your parts like the back buttons etc that would be cool
Not work
Could you please contact our customer service via email at info(at)extremerate.com to let us know more details on the issue?
Can i get modded ps5 dual sense controller with paddles shipped to my location?
when are we getting back buttons and not these cluncky paddles ?
you make no sense these are 2 paddles 2 buttons
if you wanted 4 paddles get a actual pro controller
like the xbox elite controller or the playstation edge controller
these paddles are meant for people who are on a tight budget and want paddles
@@RottyTheGottyrise 4 = 4 paddles
@@AJCoReTV bro its 2 paddles 2 buttons 💀💀💀 who are you correcting not me
The ribbon cable wont stay in the posts