I have found that if I dump my vinyl tires in a bag of talc and scrub them around for a few minutes it will dull the vinyl perfectly. Just wash off the talc and your ready to mount the tires on the rims. Air erasers are cool but you have all that abrasive material floating around your room. You have to use them in a well ventilated space for sure and for goodness sakes, wear a good quality respirator. They are really cool for creating worn finishes on painted parts. Love these videos.
Those Air Erasers were and still are a God send. Strips paint off car bodies nicely but watch that air pressure or you'll gouge the body, it takes a lot of finesse but purple power is cheaper ;)
I do the dental part. We etch crown internals to clean them and create surface roughness to allow for better cementation of glues. Some Doc’s use theirs in the mouth…with protection and vacuum of course. I also use mine for modelling, removing old paint like a dream, gently. I will bring my abrasion booth and equipment home to my model shop when I retire from my practice. New subscriber, just catching up on all your videos. They are very well made and professional 👍🏻😎
Doug, May have just found your channel but have to point out to all that your air is built into your bench. I will be looking into altering my bench to accommodate this change I think it is stellar.
So glad I ran across this video. Although I'm interested in model railroading, you did mention some valuable things which have helped me to decide to get an air eraser. I've often thought these could be handy but for what. Earlier tonight I read a post that a guy just mentioned "sand blasting" freight car trucks so they would take paint. Typically truck frames are molded out of Delrin/Acetal plastic which is not paint friendly. He stated that by sandblasting not only did it get rid of the shine but helped them to retain weather paints. You got a new subscriber.
I’ve used the same air eraser on the larger cast metal parts in a Model Factory Hiro kit. It dulls them slightly and eliminates shiny areas. It sure is a messy process!
I have been using this gun on older cars when I want to remove the chrome and paint trim pieces. This is 1:1 cars ( rebuilds/customs ) pretty cool to see someone using it for models.
Hi Doug, I bought a eraser after watching this video, I used it on some tires but really like it for photo etch belt buckles. It knocked down the unrealistic shine like a champ. Thanks for the tip
Little late to the show here. Great video, thanks. I had the Paasche Air Eraser and it had issues right away. I found a knock off version at Harbor Freight and it works great to this day. Not having an air eraser is like not having an X-Acto knife IMHO.
Great video, as always... I'm amazed at just far you go with your modeling. Its awesome... and I'd like to give credit to the comments section as well... even more great stuff!!!... and may you always a project on your bench!
I've been doing the same thing on my tires with a glass bead blast cabinet that I use for 1:1 car parts. Works very well with the pressure regulated down to 55 pounds.
In lieu of this excellent tool I've used a gentle scouring powder called "Bon Ami" which I apply with a soft piece of cloth and or a toothbrush, usually my wife's.😉 I have seen weathering (fading/wearing) done with this product and it is outstanding.👍
I have found that using a toothbrush and either toothpaste or even better take a bar of lava soap and make it into a past and brush that on. Probably less consistent than the air eraser but far easier to cleanup/manage not to mention no health hazards.
I always did wonder why Bob chose to machine those axles in brass I'm lucky enough to have a set of the big and little halibrands with knockoffs that he made
I was recently wondering if this would work but never bothered to really look for information. Now that i know it will work with at least 2 of my hobbies, it's tone to break out the wallet!
Thanks, Peter, welcome to the channel! Technically, you could use an air eraser to remove the paint but it would be a very uneven result. A better option would be a polishing kit with a series of abrasive cloths and a liquid compound and a little patience ;)
Not a air eraser, but I have been using the Badger Mini Sandblaster on model cars since the mid 90's. I find using a courser silica sand will give tires a more rubbery look vs the finer sand. I do, however, use the fine sand in between the treads.
Hi Doug, Great tip, awesome presentation! One question, at 0:19 in your video there is a Chrome 8 spoke wheel with 4 lug bolt pattern, Can you tell me what kit to find them in? I need to do a model of my Miata that has those wheels.
Well, I started with the Minilite wheels from the George Follmer's Javelin, Jo-Han kit, which didn't have any lug nuts. I added the four lug nuts. I also cut away the original rims and added my own machined aluminum rims to get the offset I wanted. The Minilites from the Jo-Han kit wold be perfect for a Miata; all you'd have to do is add the lug nuts.
There is a helpful link in the video description to help you find an air eraser.
I have found that if I dump my vinyl tires in a bag of talc and scrub them around for a few minutes it will dull the vinyl perfectly. Just wash off the talc and your ready to mount the tires on the rims.
Air erasers are cool but you have all that abrasive material floating around your room. You have to use them in a well ventilated space for sure and for goodness sakes, wear a good quality respirator. They are really cool for creating worn finishes on painted parts.
Love these videos.
WOW, Doug. This is just a TREASURE of a tip video. I'm getting one!!!
Let me know what you think of it.
Great video. I'm 45 and am rediscovering model building. This is one of the best and most original tips I've seen. Thank you.
Glad it was helpful!
@@ModelCarMuse I purchased the Harbor Freight version after watching. Excited to see the results first hand.
Those Air Erasers were and still are a God send. Strips paint off car bodies nicely but watch that air pressure or you'll gouge the body, it takes a lot of finesse but purple power is cheaper ;)
I do the dental part. We etch crown internals to clean them and create surface roughness to allow for better cementation of glues. Some Doc’s use theirs in the mouth…with protection and vacuum of course.
I also use mine for modelling, removing old paint like a dream, gently. I will bring my abrasion booth and equipment home to my model shop when I retire from my practice.
New subscriber, just catching up on all your videos. They are very well made and professional 👍🏻😎
Welcome! That's so cool, I'm glad these are still in use in the dental field.
Just found your channel. You started one day after my birthday. I like your details. Keep them coming.
Doug, May have just found your channel but have to point out to all that your air is built into your bench. I will be looking into altering my bench to accommodate this change I think it is stellar.
So glad I ran across this video. Although I'm interested in model railroading, you did mention some valuable things which have helped me to decide to get an air eraser. I've often thought these could be handy but for what. Earlier tonight I read a post that a guy just mentioned "sand blasting" freight car trucks so they would take paint. Typically truck frames are molded out of Delrin/Acetal plastic which is not paint friendly. He stated that by sandblasting not only did it get rid of the shine but helped them to retain weather paints. You got a new subscriber.
That's really interesting, thanks for sharing that with us! Many techniques are universal to any model building. Welcome to the channel.
Welcome to the you tube modeling community Doug. I've followed your modeling for years and lokk forward to your videos.
I’ve used the same air eraser on the larger cast metal parts in a Model Factory Hiro kit. It dulls them slightly and eliminates shiny areas. It sure is a messy process!
Excellent information. Thank you
I have been using this gun on older cars when I want to remove the chrome and paint trim pieces. This is 1:1 cars ( rebuilds/customs ) pretty cool to see someone using it for models.
Pretty cool, I've always preferred the hollow tires, never cared for the solid ones.
Interesting tool!!! Thanks for sharing.
Hi Doug, I bought a eraser after watching this video, I used it on some tires but really like it for photo etch belt buckles. It knocked down the unrealistic shine like a champ. Thanks for the tip
Great to hear!
I bought one of these from Harbor Freight with the intention of using it on various weathering projects and never thought about tires!
Did it work out for you? I know this is an old post but I was going to pick one of these up today possibly
@@bikingandfishing6546 I did use it stripping a diecast, however I havent spent much time at the workbench over the summer and thru the autumn.
I've had an air eraser for years, I've always used it to etch glass but I've never thought about using it on my models. Thanks for the great info...
Happy to help!
Excellent tip Doug. Looking forward to more!
More to come!
Wow! I never would have thought. Amazing tip. Thank you sir!
Awesome Video Doug.... Definitely going to get one of these.... The possibilities are endless...
I bet you'll find some uses I hadn't thought of.
Little late to the show here. Great video, thanks. I had the Paasche Air Eraser and it had issues right away. I found a knock off version at Harbor Freight and it works great to this day. Not having an air eraser is like not having an X-Acto knife IMHO.
Wonderful tip. Thanks.
Great video, as always... I'm amazed at just far you go with your modeling. Its awesome... and I'd like to give credit to the comments section as well... even more great stuff!!!... and may you always a project on your bench!
I've been doing the same thing on my tires with a glass bead blast cabinet that I use for 1:1 car parts. Works very well with the pressure regulated down to 55 pounds.
Hey Matt 👍👍👍
Great video Doug! An awesome tool indeed! I have used the Paashe and now the CentralPneumatic air eraser for years. And yes! Use a good moisture trap!
That's great!
Great tip. Wish I still had mine. Sold it during the machine shop fire sale. :^(
Thank you Doug for your very informative video and plugging Norm thank you
Norm's the best!
Thank you great idea 👍
In lieu of this excellent tool I've used a gentle scouring powder called "Bon Ami" which I apply with a soft piece of cloth and or a toothbrush, usually my wife's.😉
I have seen weathering (fading/wearing) done with this product and it is outstanding.👍
Thanks for sharing this tip. I like your technique. Bon Ami is good stuff!
Wow, just found your channel Doug, what's tip . Thanks for sharing. . Rick 😎✌️
Welcome!
Excellent advice something to look into especially on old gassers
Glad you enjoyed it!
Definitely an important detail on your model Doug, can’t count how many times this is overlooked when at the shows……
Thanks for the tip 👍
Looks like an awesome tool
Great tip! Just learned a lot in a short time. Thanks for the video😎👍
Glad it was helpful!
Baking soda is another medium, in case you need it… in a pinch.
Great video. Ive never seen that before. Ill be picking one up now.
Thanks for sharing
I have found that using a toothbrush and either toothpaste or even better take a bar of lava soap and make it into a past and brush that on.
Probably less consistent than the air eraser but far easier to cleanup/manage not to mention no health hazards.
I always did wonder why Bob chose to machine those axles in brass I'm lucky enough to have a set of the big and little halibrands with knockoffs that he made
Brass polishes well and can be plated.
Seen one of those at harbor freight less the $30 think I'll be picking one up
Great video!
I’m new to your channel. Like it a lot. Think I’ll stick around. Lol
Great video, and cool tip.
I was recently wondering if this would work but never bothered to really look for information. Now that i know it will work with at least 2 of my hobbies, it's tone to break out the wallet!
Can you use that to get rid of orange peal effects with clear finishes? Great video!
Thanks, Peter, welcome to the channel! Technically, you could use an air eraser to remove the paint but it would be a very uneven result. A better option would be a polishing kit with a series of abrasive cloths and a liquid compound and a little patience ;)
I wonder if you can spray dry flake for a custom paint job.
I've never tried that, but it sounds like great idea! If you try it, please let us know how it goes.
Not a air eraser, but I have been using the Badger Mini Sandblaster on model cars since the mid 90's. I find using a courser silica sand will give tires a more rubbery look vs the finer sand. I do, however, use the fine sand in between the treads.
Hi Doug, Great tip, awesome presentation! One question, at 0:19 in your video there is a Chrome 8 spoke wheel with 4 lug bolt pattern, Can you tell me what kit to find them in? I need to do a model of my Miata that has those wheels.
Well, I started with the Minilite wheels from the George Follmer's Javelin, Jo-Han kit, which didn't have any lug nuts. I added the four lug nuts. I also cut away the original rims and added my own machined aluminum rims to get the offset I wanted. The Minilites from the Jo-Han kit wold be perfect for a Miata; all you'd have to do is add the lug nuts.
So the air eraser is like a sandblaster like you would use on real cars