...GREAT Vid !!! I have a broken door handle on the outside of the door ,so I'm changing the door handle on my '72 Pro-Street Vega.....You made it look easy man...THANKS !!!
As always Sir. Your the True King. I wish we could all band together donate a bunch of money to ya and make you the world's Teacher. You Rock. Thank you so much
Good resource, one which I kept referring to while I changed out both mine but have to mention a few improvements - [1] The plastic protector escutcheons (gaskets) may not be included in aftermarket handles but should be ordered and installed with them; [2] You will need to purchase four metric washers (M6x18) and four metric hex nuts (M6-1.00); [3] Be sure to lubricate the coiled spring on the handle before install; and [4] It is much easier to use a ratcheting flat or flex head wrench rather than a socket and handle wrench. Also note that door handle widths were slightly wider for 70-75 and at ca. 5.5" for 76-81 models, although some early 76 models were equipped with the older versions but otherwise both versions will fit. And while you're there, lube your power window mechanisms, too.
Hi guys. I ordered those gaskets from f-body warehouse. Thanks for the video. My Camaro is missing the gasket and I don't want to ruin new door panels. Cheers
Thanks for making this post. i was scratching my head this afternoon I'll tell you. Those back nutz are a buggar to get at. Just one note, although it is too late now, there should have been a plastic gasket to weather seal behind the handle to protect from rain intrusion. I guess the PO removed the handle at some time a failed to reinstall the gasket.
Debating modifying a car with basic handles like this. Don't think it will be too hard. Just need to change the flat steel on the door panel underneath of the handle the rods might actually work as is. Might have to flip the direction of the push down into more of a pull up by cutting it and bolting it back on as well.
Hello. Guys I'm waiting for the gaskets. Have any of you installed them? Also I ordered spare clips that help connect rods. Maybe I can upload a video of the parts. Thanks again and make it a great day.
...GREAT Vid !!! I have a broken door handle on the outside of the door ,so I'm changing the door handle on my '72 Pro-Street Vega.....You made it look easy man...THANKS !!!
Tony Z thanks for watching and commenting
Thankyou for filming this.
Thanks for watching and don't forget to subscribe 😉
As always Sir. Your the True King. I wish we could all band together donate a bunch of money to ya and make you the world's Teacher. You Rock. Thank you so much
Lol thanks man
Good resource, one which I kept referring to while I changed out both mine but have to mention a few improvements - [1] The plastic protector escutcheons (gaskets) may not be included in aftermarket handles but should be ordered and installed with them; [2] You will need to purchase four metric washers (M6x18) and four metric hex nuts (M6-1.00); [3] Be sure to lubricate the coiled spring on the handle before install; and [4] It is much easier to use a ratcheting flat or flex head wrench rather than a socket and handle wrench. Also note that door handle widths were slightly wider for 70-75 and at ca. 5.5" for 76-81 models, although some early 76 models were equipped with the older versions but otherwise both versions will fit. And while you're there, lube your power window mechanisms, too.
Thanks..don't forget to subscribe
Hi guys. I ordered those gaskets from f-body warehouse. Thanks for the video. My Camaro is missing the gasket and I don't want to ruin new door panels. Cheers
Oneofthetwelve kool..thanks for watching
I appreciate your video
Thanks for watching and don't forget to subscribe
Thanks for making this post. i was scratching my head this afternoon I'll tell you. Those back nutz are a buggar to get at. Just one note, although it is too late now, there should have been a plastic gasket to weather seal behind the handle to protect from rain intrusion. I guess the PO removed the handle at some time a failed to reinstall the gasket.
Yes, skipping the gasket was as shoddy as skipping the nut.
I'm surprised that you didn't have a washer on the install. That nut looked awfully small compared to the hole. Thanks. Great video.
they are originally flange nuts, very shoddy install.
Debating modifying a car with basic handles like this. Don't think it will be too hard. Just need to change the flat steel on the door panel underneath of the handle the rods might actually work as is. Might have to flip the direction of the push down into more of a pull up by cutting it and bolting it back on as well.
Do u have any videos on how to put the door lock pawl and cylinder in?
Hello. Guys I'm waiting for the gaskets. Have any of you installed them? Also I ordered spare clips that help connect rods. Maybe I can upload a video of the parts. Thanks again and make it a great day.
Y’all never showed how to take the clip off
Yeah we did
I belive the test went wrong
Huh?
Its a 11mm not 7/16
LOL 😆 not on a 79 camaro
@@klowny1969 yeah a 79 camaro i got one and i just fixed the door handle
And they are not 10mm nuts, but 6mm. They just use a 10mm socket. Big difference.