i had a issue with the vesc tool where i couldnt get the pulsewidth display to show a value reading so i just used your values and it worked flawlessly, thanks
Hi I bought a Nazare from you six months ago and I want a spare VX1 remote, on flipky website they have 3 different types : (4) (6) or non VESC which one works with Unity focbox ? ,and to pair do I need to hook up to a computer or just pair since it is the same remote ?
where do I find bldc-tool for OS X? Crossing my fingers that this will all work. thx ... finally was able to find the software via Enertian website, and the software was free but still required a PayPal account and registration... Now that I have a connection via the software, I do not see VESC as the Serial Connection, rather cu.Bluetooth-Incoming-Port... I am going to run w/ this to see what happens next..... woohoo, finally got VESC connection... needed to hold down the Power Button longer... o.k. next... dang... computer works w/ VESC Focbox.... got as far as the App and disabling the motors and activating display, though my FlipSky Controller is not pairing... now what? hmmm... all the wires are correctly configured. I see the illuminated blue light next to the Focbox... and I have a connection via the computer... but the FlipSky is not pairing... hummm stuck till I figure this out... help anyone? Got remote to pair... read directions for the remote... no directions for the remote in the box... but you have to hold two buttons down to pair properly... good thing I had my board on blocks, as disabling the board in the app, did not stop the wheels from spinning... going forward... remote works.... whew. Configrued all the settings as specified.... Seems to work fine... going to overview the VESC Settings Again.... just to make sure it's perfect.... wow.... The VX1 trigger has a lower profile, so the thumb needs to firmly planted on it to avoid slipping. It seems to pair a lot easier than my NanoV2. I just tried it out this morning on my Prototipo. It feels more like a Boosted Controller.
i had a issue with the vesc tool where i couldnt get the pulsewidth display to show a value reading so i just used your values and it worked flawlessly, thanks
Hi I bought a Nazare from you six months ago and I want a spare VX1 remote, on flipky website they have 3 different types : (4) (6) or non VESC which one works with Unity focbox ? ,and to pair do I need to hook up to a computer or just pair since it is the same remote ?
Hi bret i suggest you to write to support@lacroixboards.com for all your questions. Have a good day :)
@@lacroixadventures2009 I DID TO NO AVAIL ! THEY DIDN'T CATCH COVID DID THEY ?
@@bretholtzman1524 Not sure of your answer. But yes some of us got it, but we are back on track
What configuration flipsky did you end up getting for your Nazare? I’m looking to buy a spare myself and I’m not sure.
When I click refresh arrow in BLDC tool, it fills in as COM3 instead of what yours says. If I click connect, it tells me my firmware is too old.
Great tutorials J.F !!
I think I'll just never use my skateboard again
where do I find
bldc-tool for OS X? Crossing my fingers that this will all work. thx ... finally was able to find the software via Enertian website, and the software was free but still required a PayPal account and registration... Now that I have a connection via the software, I do not see VESC as the Serial Connection, rather cu.Bluetooth-Incoming-Port... I am going to run w/ this to see what happens next..... woohoo, finally got VESC connection... needed to hold down the Power Button longer... o.k. next... dang... computer works w/ VESC Focbox.... got as far as the App and disabling the motors and activating display, though my FlipSky Controller is not pairing... now what? hmmm... all the wires are correctly configured. I see the illuminated blue light next to the Focbox... and I have a connection via the computer... but the FlipSky is not pairing... hummm stuck till I figure this out... help anyone? Got remote to pair... read directions for the remote... no directions for the remote in the box... but you have to hold two buttons down to pair properly... good thing I had my board on blocks, as disabling the board in the app, did not stop the wheels from spinning... going forward... remote works.... whew. Configrued all the settings as specified.... Seems to work fine... going to overview the VESC Settings Again.... just to make sure it's perfect.... wow.... The VX1 trigger has a lower profile, so the thumb needs to firmly planted on it to avoid slipping. It seems to pair a lot easier than my NanoV2. I just tried it out this morning on my Prototipo. It feels more like a Boosted Controller.
Just to confirm, we only calibrate the remote on the Master Focbox or rather the Focbox that the receiver is plugged into?
Thanks
Hey, Steve, do you know what little metal piece connecting to the receiver for the voltage reading called?
What's the piece metal you attach to the lead wire that gore to the receiver? Do you have a link or what it is called?
Man, I really wish we could activate reverse like this😞