Great video man! I know the RX/TX was an issue for me on my build, thanks for helping me fix that. Swapping the pins was surprisingly easy, just need a small flat head screw driver and about 2-3 minutes of time.
YYYYYEEEEEESSSSS THANKS YOU THE LAST 2 FIXED MY SKATEBOARD THANK YOU I been sitting trying see what the problem for hours I would have never have thought to switch the wires
Great video, what about when I’m cruising and the signal gets lost mid ride? I can’t find the cause and i want to prevent that from happening on a turn or something.
Hello, I have a question about your xl enclosure. Is it stiff or streng enouth for a very flexible long Board? Because if I mount it to my flexible Longboard I guess there two options one the Board doesn’t flex at all or the Box will break. Have you tryed something like this already ? Thank you
Hey Mike and Mark. Quick question relating to the remote. Is there any way to reprogram the remote so when I double tap or triple tap a button it can give me a different function? For example, I am trying to get the remote to turn on my LED underglow on my board by double tapping the speed setting (I can’t use the power button because it will bring up remote battery and that’s important). I’m thinking I could use this device to make it happen but I’m not sure how to go about reprogramming the remote to allow this function. Any tips?
Your not going to find this function with this application of vesc speed controller and receiver. Check out the U-box by spinten and there remote if you want to comtrol lights on off , horn , and brake lights.
Hello Mike I can't pairing my new remote of eovan to my eovan gts direct drive, should I change the vesc ? Which one in case of yes? Thank a lot PS nobody I. Eovan answer to my question
Great video man! I know the RX/TX was an issue for me on my build, thanks for helping me fix that. Swapping the pins was surprisingly easy, just need a small flat head screw driver and about 2-3 minutes of time.
YYYYYEEEEEESSSSS THANKS YOU THE LAST 2 FIXED MY SKATEBOARD THANK YOU I been sitting trying see what the problem for hours I would have never have thought to switch the wires
Woohoo! Glad it helped!
This Video saved me a ton of time!!!!! Many Thanks !!!
Great video, what about when I’m cruising and the signal gets lost mid ride? I can’t find the cause and i want to prevent that from happening on a turn or something.
Hello,
I have a question about your xl enclosure. Is it stiff or streng enouth for a very flexible long Board? Because if I mount it to my flexible Longboard I guess there two options one the Board doesn’t flex at all or the Box will break. Have you tryed something like this already ? Thank you
Hey Mike and Mark. Quick question relating to the remote. Is there any way to reprogram the remote so when I double tap or triple tap a button it can give me a different function?
For example, I am trying to get the remote to turn on my LED underglow on my board by double tapping the speed setting (I can’t use the power button because it will bring up remote battery and that’s important). I’m thinking I could use this device to make it happen but I’m not sure how to go about reprogramming the remote to allow this function. Any tips?
Your not going to find this function with this application of vesc speed controller and receiver. Check out the U-box by spinten and there remote if you want to comtrol lights on off , horn , and brake lights.
I have another problem in that the VX2 and receiver will not pair, any ideas?
Hello Mike
I can't pairing my new remote of eovan to my eovan gts direct drive, should I change the vesc ? Which one in case of yes?
Thank a lot
PS nobody I. Eovan answer to my question
Hey brother!
Shoot us an email here with a few pictures!
support@mboards.co
We’ll send over a list of parts to get your board back up and running 👍🏻
⚡ tbt *A non-podcast video* on the channel 👀⚡
🤙🏼👏🏼👏🏼🤙🏼
I know right!!
@@MBoardsco sprinkle some more in! 🤙🏼
That the plan! Finally have the set done!