My remote is being crap like I bought it from buildkitboards n it wont go forward it only goes backwards I'm doing the scrolling back n press the button does nothing I have to go to esc n change setting to just go forward it's making me mad :(
I just bought a board with this remote. My board is completely charged but the power indicator on the remote stays blinking at 25% mark. Do you know why this is? I can't find answers anywhere.
Honestly not sure. You would need to plug in there VX1 receiver somewhere into a UART or PPM port which I don't know if there is on a GTR. Most likely would need an ESC change.
I am having connection issues with the VX1. I have a torque board and I am keep getting disconnected while riding...pretty scary sometimes wondering why I can't stop and accelerate. Any tips to diagnose the issue?
DIY esk8 Builders I hear you on that. I’ve purchased the Black Carve from Fabi , I know they aren’t torqueboards direct drive, an I’m just wondering what people think of this type of set up.
Yeah I’m intrigued by the black carve. I’ve seen those direct drive motors and wondered how goo they actually are. They seem to be decent but definitely not torque boards quality. Let me know what you think once you’ve tried it!
DIY esk8 Builders this is actually gonna be my first Esk8 so it’s gonna take a bit for me to get used to it and what not but I will definitely let you know what I think. I should ,hopefully, have by the end of the month. I’ve looked for his motor online, and found it, but I couldn’t find one that matches the specs he’s given so I’m definitely curious on how it’s actually gonna preform
You don't really have to do anything, just set it up like you would for ppm is what I did. I kind of just skipped through the menu and then after having programmed the VESC, I plugged the receiver into the UART port
Flipsky VX2 is out now too haha
Lol true, probably gonna test that out soon
And next remote is in the development.
The VX2 starts shipping today!
My remote is being crap like I bought it from buildkitboards n it wont go forward it only goes backwards I'm doing the scrolling back n press the button does nothing I have to go to esc n change setting to just go forward it's making me mad :(
I just bought a board with this remote. My board is completely charged but the power indicator on the remote stays blinking at 25% mark. Do you know why this is? I can't find answers anywhere.
Is the voltage wire connected to the voltage? Also is the remote set to the proper voltage? You have to go into the remote settings and change it
Hello could I use that remote On my evolve GTR? Is there a way to pair it without changing the ESC?thanks
Honestly not sure. You would need to plug in there VX1 receiver somewhere into a UART or PPM port which I don't know if there is on a GTR. Most likely would need an ESC change.
I am having connection issues with the VX1. I have a torque board and I am keep getting disconnected while riding...pretty scary sometimes wondering why I can't stop and accelerate. Any tips to diagnose the issue?
I would reach out the manufacturer and tell them what you are experiencing
@@DIYesk8Builders yes. They finally got back to me after a week of no response. They are sending a replacement VX1.
Hey guys, I remember you had a video up that was a review of this remote, did you delete it?
Is this not the review video?
@@DIYesk8Builders No, it was like more of a ride review
@@saudicodgamerz we have only had one review of the vx1 but we you could be thinking of a video that has the vx1 in it
My remote shows only one red light blinking slowly but my skateboard battery is 100% charged. Do I need to adjust some VESC settings?
Adjust the remote settings to the voltage of your battery. There are instructions inside of the manual
Can you pair other remotes to it like the small original Meepo remote?
I'm not sure but probably not
Thanx sir
can you use this remote and a Bluetooth module on a single vesc 4.12? To my knowledge, they both connect to the UART port.
Yeah I think you possibly could if you spliced the wires but we have never tried it. We have only ever used a module and UART remotes on dual VESC
DIY esk8 Builders okay thanks
Can this remote work for blink s
Please some one who knows what can I buy to ride a blink s **
wuld you like see ubgrate 500mah bat, to 1000mah bat in the remo? I have it dan...
Sure
@@DIYesk8Builders
m.th-cam.com/video/iZLDoF_hbHE/w-d-xo.html
@@DIYesk8Builders have you see??it..
Have you had a chance to try those direct drives yet? If so what’s your thoughts on them?
I have not if you’re referring to the ones from torque boards. I’d love to test them out but they’re so expensive
DIY esk8 Builders I hear you on that. I’ve purchased the Black Carve from Fabi , I know they aren’t torqueboards direct drive, an I’m just wondering what people think of this type of set up.
Yeah I’m intrigued by the black carve. I’ve seen those direct drive motors and wondered how goo they actually are. They seem to be decent but definitely not torque boards quality. Let me know what you think once you’ve tried it!
DIY esk8 Builders this is actually gonna be my first Esk8 so it’s gonna take a bit for me to get used to it and what not but I will definitely let you know what I think. I should ,hopefully, have by the end of the month.
I’ve looked for his motor online, and found it, but I couldn’t find one that matches the specs he’s given so I’m definitely curious on how it’s actually gonna preform
Can you use this remote on the the exway flex?
Not sure
Hi there, how do you set up UART port in VESC tool?
Thanks
You don't really have to do anything, just set it up like you would for ppm is what I did. I kind of just skipped through the menu and then after having programmed the VESC, I plugged the receiver into the UART port
I don't even know what the vesc is. Is that something separate I have to get
How does the 3 mode work ? does it affect the top speed?
Yes it affects the acceleration and top speed
This is like an old meepo board remote. The main reason why I stopped building with vesc was as good as they are the remotes on offer are cak.
Yeah there’s still some room for inmprovennt but it’s a big step up from I’ve previously used and what most people used to use