I just installed the Castle creations bec with a Savox servo. I would have been tempted to in stall this bec, but I've have nothing but problems with Traxxas electronics. Cool video though, cheers!
So far so good on the new traxxas stuff, they are stepping up their game and I like the direction they are going. Plus this bec is a no brainer, it went in super easy, only drawback to some of us who want to run a HV servo is it’s only 6v.
Is just me or it feels a bit noisy the new servo? I've got the Castle BEC in my Summit with 2x SAVOX servos but connect it differently. More exactly the new BEC powers the servos directly and picks only the signal from the receiver. So the receiver keeps its bec for the smaller servos, lights, etc. This way I can provide enough power to the hungry servos but keep the receiver run cool! You can see my rig on my channel. My Traxxas Summit LT t's a scaled crawler converted at the moment...
The reason it didnt brown out on yours is because you lack the other 3 servos from the OG TRX4. The problem is the XL5 HV Internal BEC has a wimpy 1A output.... It gets overloaded when you add 4 freaking servos to it of course, So the External BEC is a must have for those with the OG TRX4 and are upgrading the steering servo.
@@ExocagedRC The problem is the TQi TX does not have End Point Adjustments for channels 3 4 and 5 so those Sub-Micro servos are always hunting for end points… That is the reason they use a Servo Saver, They are designed to absorb any excessive movement from the servo at each end point.. Its a very stupid system because the TQi is hugely limited in adjustments in this regard.
awesome video as always bro I just finished putting a 1/8th system in an ftx bugsta ....... I think I will maybe post my next projects but that will be next year now but that thing is jokes on 4s :):):)
How do you install this on a TRX4 Blazer running hobbywing 1080? I do have the Blazer light kit. Can I connect the JST connector into the power module for the light kit?
See in mine trx4 defender the servo works good until you applied throttle,it start to loose power and work little slow,once you stop the servo start to work and response fast again , I'd buy the traxxas bec after i saw your video ,one more question I'd buy a winch too can i plug the winch on the split connector that come with it
I wonder if they sell just the bec. I feel like it’s a wast of money to pay for foam and a zip tie. And y harness. If they do, do you have the part number. Thanks -Erik
Sorry but you never build a BEC directly into the receiver box. The BEC should be at least 5 cm away from it. It can lead to electromagnetic interference. What do you mean what the box in the set is here.
Sure if you bypass the bec around the receiver you can power anything, if both the bec and esc are plugged into the receiver you usually have to remove the red wire from the esc plug into the receiver. If both the esc and bec are set at 6v I've had good luck with just leaving them in. You don't want the esc at 6v and the bec at 7v plugged into the same receiver.
@@jamesspence9880 sure you can change the bec to power a HV servo but if the receiver can't handle that, it doesn't last long, thats whay I mentioned the bypass
I wasn't being serious. It's great that they finally know their cars need better servos but paying $150 for it when you can get 6 similarly spec'd or 3 ridiculously spec'd servos for the same price. . . plus any bec I would use would have to be HV. I can't deal with servos crapping out after 20 mins of rocking when the batteries I use can last an hour.
@VA OldSchool one thing I did knock anybody anything from buying Traxxas I own the TRX sport another thing it's made in Taiwan I thought Traxxas was an American product but I guess I was wrong
@@ExocagedRC Where I connect the pin that would go to the original esc. I should cancel the internal bec in the hobbywing?? I want to feed servo at 7.4v
José Antonio Sánchez Vázquez oh ok you want to run a bec straight to the servo. For that leave the axe esc wires alone, power the bec up and get a servo wire bypass. That will allow you to send 7.4v to the servo and let the receiver run on 6v from the axe. Holmes Hobbies sells bypass adaptors to make it an easy job.
@@ExocagedRC Ahh okk, but I already bought the bec traxxas, I can get it with bec traxxas and hobbywing.sorry the inconvenience I am denied for electronics😔
José Antonio Sánchez Vázquez ok well unless you’re willing to do some cutting a soldering you’re stuck at 6v. That’s all the traxxas bec can do is 6v. It’s not adjustable. If you’re willing to cut and solder you could run the bec to power the receiver and bypass the esc set at 7.4v to the servo. That’s the only way you’re going to get it to work.
You could use conformal coating on the board and basicly have any servo waterproofed. I put a little dab of silicone on the wire/case junction and had good luck with that. If you want a true waterproof savox try the SW1210SG 444oz 0.13s Not brushless though, only Coreless.
Sean P RC the protec 370 is an awesome servo. I’ve never tested one but from what I’ve seen it’s awesome. My favorite right now is the Reefs Raw500 for ease of installation and the Holmes SHV500v2 for direct battery power.
HW is crap! If you push them they fail! It's a real crap shoot with them. Holmes Hobbies electronics and motors or Castle Creations. Better to buy one and it last 5 years than the down time and cost to buy 3 others.
Hi,please try explain it to me everybody when use an external bec to increase the performance on the steering servo plug it on channel 1 which is of course steering i don't still get the why it plug on channel two
because the bec gets power directly from the battery and it puts that power into the receiver at ch2, the plug swap is so the red wire from the esc can be disconnected inside the bec so its a simple plug and play setup. In most cases the red wire from the esc is removed from the plug when installing a bec into a receiver. Hope that helps
I honestly don’t think they are made by anyone other than traxxas, the reason I say that is they are big enough to have a servo made on their own and shouldn’t need to rebrand anything at this point.
Wayne Mcclanahan this Bec is only good for 6v and the Mamba X doesn’t need an external bec, unless you want hv to servo and 6v to shift and diff servos.
That's not true, 400 oz-in is actually 28.8kg-cm and I don't see any Power HD's over 25kg-cm. The Traxxas one is exceptionally good considering it does 400 oz at 6v. Most of the higher torque servos need 7.4V to achieve those numbers.
I find that out of all TH-cam videos yours seem to be the most informative . Great content and no b/s.
I just installed the Castle creations bec with a Savox servo. I would have been tempted to in stall this bec, but I've have nothing but problems with Traxxas electronics.
Cool video though, cheers!
So far so good on the new traxxas stuff, they are stepping up their game and I like the direction they are going. Plus this bec is a no brainer, it went in super easy, only drawback to some of us who want to run a HV servo is it’s only 6v.
Awesome video excellent upgrade quick simple great run
That BEC instal was super easy and it works really well
Ordered, coming in soon, can't wait. Thanks heaps.
Straight to the play list. Thanks heaps.
That looks like it works pretty good, I need to upgrade my trx4 servo because the stock servo doesn't seem to be strong enough, thanks for the info
Is just me or it feels a bit noisy the new servo?
I've got the Castle BEC in my Summit with 2x SAVOX servos but connect it differently. More exactly the new BEC powers the servos directly and picks only the signal from the receiver. So the receiver keeps its bec for the smaller servos, lights, etc. This way I can provide enough power to the hungry servos but keep the receiver run cool! You can see my rig on my channel. My Traxxas Summit LT t's a scaled crawler converted at the moment...
Nice job on the install tutorial.👍👍
The reason it didnt brown out on yours is because you lack the other 3 servos from the OG TRX4. The problem is the XL5 HV Internal BEC has a wimpy 1A output.... It gets overloaded when you add 4 freaking servos to it of course, So the External BEC is a must have for those with the OG TRX4 and are upgrading the steering servo.
True but if the servos are properly set with end points and all that, they shouldn't be under any load.
@@ExocagedRC The problem is the TQi TX does not have End Point Adjustments for channels 3 4 and 5 so those Sub-Micro servos are always hunting for end points… That is the reason they use a Servo Saver, They are designed to absorb any excessive movement from the servo at each end point.. Its a very stupid system because the TQi is hugely limited in adjustments in this regard.
You have a point.
Isn't the Traxxas BEC 7.4v? The stock ESC provides 6v, so it would redundant to install a BEC of the same voltage
it's 6 volt - it's still way better due to the extra current the BEC allows
Nice thanks
Great review as always! Should have put it on your old servo test board if you still have it
Never even thought of that.
Thanks very professional explanation,so in this case i don't have to remove the red wire (positive)as we have to do when using others becs?
Correct
Sweet video 👍🏻👍🏻👍🏻
Great video! Nice review :)
You didn't mention, Do you remove the middle (Red) plug from the Traxxas ESC? when connecting the Traxxas BEC?
With the bolt in BEC kit you don't have to mess with any of that. Its super easy to put in.
Thanks for the vid.
awesome video as always bro I just finished putting a 1/8th system in an ftx bugsta ....... I think I will maybe post my next projects but that will be next year now but that thing is jokes on 4s :):):)
Nice servo. May have to look at getting one.
very informative video, thanks
Had nothing but issues with this servo and the fact the case uses bushings and it wobbles out allowing the gears to strip
Same servo I am running in my traxxas maxx seems to be a decent servo imo but I'm no expert.
How do you install this on a TRX4 Blazer running hobbywing 1080? I do have the Blazer light kit. Can I connect the JST connector into the power module for the light kit?
I believe the bec kit comes with the jst splitter so you should be able to just use a Jst off the main battery to get everything working.
Would this BEC work on a summit?
See in mine trx4 defender the servo works good until you applied throttle,it start to loose power and work little slow,once you stop the servo start to work and response fast again , I'd buy the traxxas bec after i saw your video ,one more question I'd buy a winch too can i plug the winch on the split connector that come with it
Are you sure your battery is good? Yeah you can power a winch off the additional JST
I wonder if they sell just the bec. I feel like it’s a wast of money to pay for foam and a zip tie. And y harness. If they do, do you have the part number. Thanks -Erik
It’s meant to be as easy as possible, simple bolt on and what’s included really makes it an easy mod.
Exocaged RC ok thanks for the reply.
wait hold up! Lake City? this place still around? im in live oak
I just want that extended receiver box cover. ;) Wonder if it can be purchased separately.
I’m not sure if or when they will be available separately.
where do you find the spec sheet for the trx4 sport stock servo?
It was on the website, I’m guessing they changed the info
is there an event there tomorrow?
Sorry but you never build a BEC directly into the receiver box. The BEC should be at least 5 cm away from it. It can lead to electromagnetic interference. What do you mean what the box in the set is here.
Dude, that’s traxxas instructions, I’d rather trust the people who make the product then you.
Can i use this bec with the xerun axe esc? I already have those battery leads for lights soldered on too.
Sure if you bypass the bec around the receiver you can power anything, if both the bec and esc are plugged into the receiver you usually have to remove the red wire from the esc plug into the receiver. If both the esc and bec are set at 6v I've had good luck with just leaving them in. You don't want the esc at 6v and the bec at 7v plugged into the same receiver.
Aziz Inojatov the axe system has a good internal Bec that the can change the voltage of
@@jamesspence9880 sure you can change the bec to power a HV servo but if the receiver can't handle that, it doesn't last long, thats whay I mentioned the bypass
This or reef's 444?
Any test with the servo at 7.4v?
Why does this look exactly like the $25 30kg JX servo . . . & the JX servo has slightly better specs.
I doubt traxxas would rebrand anything considering how big they are
I wasn't being serious. It's great that they finally know their cars need better servos but paying $150 for it when you can get 6 similarly spec'd or 3 ridiculously spec'd servos for the same price. . . plus any bec I would use would have to be HV. I can't deal with servos crapping out after 20 mins of rocking when the batteries I use can last an hour.
@VA OldSchool dude the trx4 made in Taiwan
@VA OldSchool one thing I did knock anybody anything from buying Traxxas I own the TRX sport another thing it's made in Taiwan I thought Traxxas was an American product but I guess I was wrong
Do brushless servos not need a servo saver?
🤔🙏Helloa, congratulations on the canal.
You could ride bec traxxas with esc hobbywing axe???
if you use the full traxxas bec kit, yes it will work just fine. In many cases the Axe BEC is just fine.
@@ExocagedRC Where I connect the pin that would go to the original esc. I should cancel the internal bec in the hobbywing??
I want to feed servo at 7.4v
José Antonio Sánchez Vázquez oh ok you want to run a bec straight to the servo. For that leave the axe esc wires alone, power the bec up and get a servo wire bypass. That will allow you to send 7.4v to the servo and let the receiver run on 6v from the axe. Holmes Hobbies sells bypass adaptors to make it an easy job.
@@ExocagedRC Ahh okk, but I already bought the bec traxxas, I can get it with bec traxxas and hobbywing.sorry the inconvenience I am denied for electronics😔
José Antonio Sánchez Vázquez ok well unless you’re willing to do some cutting a soldering you’re stuck at 6v. That’s all the traxxas bec can do is 6v. It’s not adjustable. If you’re willing to cut and solder you could run the bec to power the receiver and bypass the esc set at 7.4v to the servo. That’s the only way you’re going to get it to work.
I have a rustler 4x4 vxl should I install one of the traxxas BEC if I install the blue traxxas 330 oz steering servo?
Kirk Leaman most likely no, should be fine with that. If it doesn’t need to be waterproofed I’d run a faster servo
Nice 👍🏽 , just finished my bec upgrade too. traxxas.com/products/parts/2262
That's pretty good but pricey. If noise is not a problem i'd take a savox 1230 at nearly half that price.
You could use conformal coating on the board and basicly have any servo waterproofed. I put a little dab of silicone on the wire/case junction and had good luck with that.
If you want a true waterproof savox try the SW1210SG 444oz 0.13s
Not brushless though, only Coreless.
R u still running this servo
A buddy has it in his truck and it still doing fine.
@@ExocagedRC what servo are you running now? Was going to get this traxxas 2255 but my local hobby shop says I need to get the Protek 370
Sean P RC the protec 370 is an awesome servo. I’ve never tested one but from what I’ve seen it’s awesome. My favorite right now is the Reefs Raw500 for ease of installation and the Holmes SHV500v2 for direct battery power.
A HobbyWing 1080 and ProModeler 470 is a better combo for about $50 less money.
HW is crap! If you push them they fail! It's a real crap shoot with them. Holmes Hobbies electronics and motors or Castle Creations. Better to buy one and it last 5 years than the down time and cost to buy 3 others.
i have this combo. with fi spools nothing wants to stop it. castle bec tho
Hi,please try explain it to me everybody when use an external bec to increase the performance on the steering servo plug it on channel 1 which is of course steering i don't still get the why it plug on channel two
because the bec gets power directly from the battery and it puts that power into the receiver at ch2, the plug swap is so the red wire from the esc can be disconnected inside the bec so its a simple plug and play setup. In most cases the red wire from the esc is removed from the plug when installing a bec into a receiver. Hope that helps
So does anyone know who actually makes these for Traxxas. Possibly savox or futuba protek.if anyone know please let me know ,thank you.
I honestly don’t think they are made by anyone other than traxxas, the reason I say that is they are big enough to have a servo made on their own and shouldn’t need to rebrand anything at this point.
I have a different esc and the light kit bit can I just solder a jst plug to the power cabels
imagine wagons if they’ll run off the voltage of the used battery. Yes
@@juantabby4787 it's the battery for the esc
Yes you sure can, power this off the main battery and it will be fine
what is the BEC for ?
Is for feed the servo and not use the internal ESC BEC.
How do I get it to work wit a mamba x
Wayne Mcclanahan this Bec is only good for 6v and the Mamba X doesn’t need an external bec, unless you want hv to servo and 6v to shift and diff servos.
@@ExocagedRC ok I hooked it up an it didn't do anything
Very expensive servo, only 11kg, for less money you can install a 32kg from Power HD.
That's not true, 400 oz-in is actually 28.8kg-cm and I don't see any Power HD's over 25kg-cm. The Traxxas one is exceptionally good considering it does 400 oz at 6v. Most of the higher torque servos need 7.4V to achieve those numbers.
@@toddsimone7182 I made a mistake, not see the 400 Oz. But, very expensive indeed.
First
Next time try following the Spanish instructions. 😂
LMAO!! Step 1....FAIL!!