Fun Fact: Most modern diesel engines don't use VVT since it yields fewer benefits on such a low revving engine. Its simpler, cheaper and more fuel and power efficient to turbocharge a diesel engine rather than only change the valve timing, especially since it already changes the fuel injector duty cycle and time offset. Only Caterpillar (since 2007) and Mitsubishi (since 2010) use VVT in their diesel engines. CAT uses it in their C13 and C15 engines to reduce emissions and eliminate the need for EGR, while Mitsubishi's 4N series of turbodiesels use it to increase performance by the looks of it. So, the Harriet Raider. Sounds fine, I like the sound of it both in name and in engine sound. It sounds like a superdiesel sports truck. Its like Harriet decided that the world needs a new GMC Syclone that can actually haul stuff while hauling ass, and from the looks of it on paper it certainly does just that. The 2020 Ford F-250 Super Duty Limited 4x4 Crew Cab weighs in at 7200lbs but only makes 375bhp. So this truck should absolutely haul ass (among many other much heavier things XD). Seeing it drive, its doing pretty well, but obviously Automation and diesels don't work together what with the temperatures going so high. Diesel engines are more thermally efficient than gas engines are under most load conditions (though gas catches up under high load low-ish rpm scenarios) so it shouldn't be getting very hot. You'll find diesel engine vehicles usually have the same radiator as their gas counterparts, but most of those have a smaller fan on the radiator (or even none at all) even when the power output matches between models. This difference is due to compression ratio, since diesels run hotter in the cylinder and that high pressure evacuates faster out of the cylinder which prevents a lot of the heat from soaking into the block unlike a gas engine which is the opposite, gas engines are hotter outside than diesels. So to counter this for Automation, its best to crank that airflow slider way up to make sure it won't overheat. I don't really have any extrapolation to make on the name, since Harriet is already well known to mean "estate ruler" or thereabouts, so the Raider can be said to be the one raiding other lands for Harriet to preside over, the Raider is the one going on royal conquest to convert the truck world to their cause for superdiesels.
@@highboosted894 I end up going on these sorts of research-tangents alarmingly often, I mentally note something about something in a video, I begin to research the topic, and then like 20 minutes later my originally concise comment has become a short article I've rather unintentionally compiled about literally everything in the video XD Edit: I saw Rye add VVT on both cams and I think he said something about whether or not diesels have it, so that got me going on researching diesel engines. I learned a bunch from that lol
I'm still hoping they add Rotary engines into Automation Edit: You would have to be really tall to be able to reach that touchscreen on the side of the door.
Industrial mechanic here. I love how you got half of the specs pretty close, and the other half way off. 😂 Entertaining video nonetheless, subscribed! 🔥
What are those grill fixtures you used at 9:26? I assume they aren’t part of dog tape, so can you please tell me what they are? I want to use it on my own vehicles.
You should send this design to Ford and see if they take it and tweak it a bit and give you most of the money made off of it. Then you will actually become a car designer from games
You should build a pickup truck following the design concepts of hyper cars. With carbon fiber body always using the strongest and lightest materials even on the engine block. Imagine if Lamborghini built a pick up truck? Please do this build
Cool build. Are there any tutorials on how to create those front and rear light sections? Regarding maneuverability: in a curve the inner wheel will rotate slower than the outer wheel. With the differentials locked, the wheels rotate at the same speed. The tighter you turn, the more you will experience this "contrast" between the differential forcing the wheels to rotate at the same speed, and the speed difference (between inner and outer wheel) required to make a turn.
@TwinTurBros, if you want I can share some tuning info in the camso_engine.jbeam to make it more realistic of a diesel. "Rolling coal", a slower rev, deeper tone, etc
It’s so awesome to see the process of building this truck and then I can download it once I get back in my pc! Didn’t find you till now but you have my sub!
So after watching this I made a diesel although mine I made a 5L I6 with 30lbs of boost 400 lb ft and 202hp. Any way I can send you the engine or specs for you to do sort of a “review” on? It’s got no VVT running 15:1 compression and actually sort of sounds like a diesel with a pretty flat torque curve. So far just the engine built, it’s not put into a truck yet.
it would be awesome if they had a Tandem rear axles DLC package with 4 wheel drive body stretching available for said mod on all the vehicles and a more extensive international list of vehicle body types even Russian and American and British and Canadian Arctic Crawlers
you should use beam.ng mods to actually give cars the specs they need. I dont ever use the base model of an automation car cuz it always sucks. I've got a handful of mods for beam that let me fully customize every car and add anything, so I just add the correct engine, in this case an i6 7.0l diesel, and other things to actually make sure the car is realistic, and then just save that preset. I wish automation had a 1:1 ratio when porting to beam.ng, but that would mean theyd have to add all of the realistic parts and shit from beam to automation, and most of those parts are mods, for me.
Ok but what abt a diesel V8 because when you referenced the Cummins, that's what the modern Cummins are, V8 Diesel Engines, also ford has the 7.2L Diesel and you could've built that lol
steamcommunity.com/sharedfiles/filedetails/?id=2178945439 here is a collection of all the current working mods for open beta version of automation! Im using pretty much all of these!
Did you know you can change the Speedometer to MPH? Simply go to the settings, Find where it says Imperial or Metric. and change it to the opposite. (Metric: KMH. Imperial: MPH) The settings wil be in Options > User interface. They should be the second option. (in no way am i bashing you and your choices, im just giving a tip in case you didint know.)
About 3 hours to do the whole thing. but most of that time is just thinking about the design :P videogames and videos are a hobby. I work a pretty boring job LOL
Has he EVER used hydropneumatic suspension in any of his videos? That's probably the best one for off-road driving, because it's really nothing but an early form of active suspension. Stronger and overall better than air, besides the fact that it's inherently balanced, even without a computer.
in sweden if a pickup is rated as 3500 kg with driver and fuel you can`t use it without having a c-lisense, b-license is rated up to 3500 kg a c-license is rated from 3500 kg to about 50`000 - 60`000 kg only for the driving veichle, if you want to ad a trailer you needc to get a be or ce license ( be = car with a trailer at max total weight of max 3500 kg ) ( ce = truck/lorry with a trailer up to about 50-65 metric 5tons on swedish rounds but tecnicly the limit is only the truck itself and road bearing weight.
Most engines, like 99% of modern engines use a 4valve train, 2,3 and 5 are pretty dead. 2 because flow. 3 because flow. 5 because flow. They flow to little or like 5valve doesnt make sense compared to 2 bigger intake valves, while producing less turbulence. And diesel also run aluminum blocks with steel sleeves for thw block. So you get lighter, better thermal conductivity and 4he strong iron sleeves for the big boost and torque of a diesel
i have real diesel engines in Automation and more tourqe note. if you want make a diesel motor make it with the 6 inline you will get more tourqe on lower rpm
The devs ain't done much for a long time. I get it it's an early access but it's about time they added other engines like diesels. Everybody's been asking for diesels for the longest time. Great video tho, sorry for the rant.
@@MichaelLawrence-dv3dn yeah last I read was because cause they wanted to stick to "regular" vehicles yadda yadda. Thing is here in Europe diesels are massively popular and it would be excellent to be able to play with diesel engines
I hope you are all having an awesome day :)
Probably my favorite build yet! Hope you have fun with it eh!
:)
Could you try to make a 24 Valve Cummins dodge ram competetor?
can u please make a European estate car /wagon they usually are diesel thanks
ps if u make the car It should be a 6 speed dual clutch
hey bud can you make a collecton of the mods you use for automation? ive been having a hard time finding them, thanks :)
I hope they add diesel, rotary, and vr/w engines
I can agree with you on that!
And with that Rotary engine they should add an FC RX-7 body
They already said they will add neither rotary nor diesel
@@mr.pineapple7620 yeah look when the comment was posted
All those and I wouldn’t mind seeing a flat head v8 as well!
Fun Fact: Most modern diesel engines don't use VVT since it yields fewer benefits on such a low revving engine. Its simpler, cheaper and more fuel and power efficient to turbocharge a diesel engine rather than only change the valve timing, especially since it already changes the fuel injector duty cycle and time offset. Only Caterpillar (since 2007) and Mitsubishi (since 2010) use VVT in their diesel engines. CAT uses it in their C13 and C15 engines to reduce emissions and eliminate the need for EGR, while Mitsubishi's 4N series of turbodiesels use it to increase performance by the looks of it.
So, the Harriet Raider. Sounds fine, I like the sound of it both in name and in engine sound. It sounds like a superdiesel sports truck. Its like Harriet decided that the world needs a new GMC Syclone that can actually haul stuff while hauling ass, and from the looks of it on paper it certainly does just that. The 2020 Ford F-250 Super Duty Limited 4x4 Crew Cab weighs in at 7200lbs but only makes 375bhp. So this truck should absolutely haul ass (among many other much heavier things XD).
Seeing it drive, its doing pretty well, but obviously Automation and diesels don't work together what with the temperatures going so high. Diesel engines are more thermally efficient than gas engines are under most load conditions (though gas catches up under high load low-ish rpm scenarios) so it shouldn't be getting very hot. You'll find diesel engine vehicles usually have the same radiator as their gas counterparts, but most of those have a smaller fan on the radiator (or even none at all) even when the power output matches between models. This difference is due to compression ratio, since diesels run hotter in the cylinder and that high pressure evacuates faster out of the cylinder which prevents a lot of the heat from soaking into the block unlike a gas engine which is the opposite, gas engines are hotter outside than diesels. So to counter this for Automation, its best to crank that airflow slider way up to make sure it won't overheat.
I don't really have any extrapolation to make on the name, since Harriet is already well known to mean "estate ruler" or thereabouts, so the Raider can be said to be the one raiding other lands for Harriet to preside over, the Raider is the one going on royal conquest to convert the truck world to their cause for superdiesels.
Thats....that's very smart. Where did you learn this?
@@highboosted894 I end up going on these sorts of research-tangents alarmingly often, I mentally note something about something in a video, I begin to research the topic, and then like 20 minutes later my originally concise comment has become a short article I've rather unintentionally compiled about literally everything in the video XD
Edit: I saw Rye add VVT on both cams and I think he said something about whether or not diesels have it, so that got me going on researching diesel engines. I learned a bunch from that lol
Ok cool
@@Avetho My life in a nutshell
i eat dogs
"If that car was a woman I would kiss her" By the Los Santos Customs Guy
I would actually like to have a truck like that but I don't have small hands
Hey you should max out cam profile and compression, then work from there. Its what I did and it sounded like a diesel and made power like a diesel
I'm still hoping they add Rotary engines into Automation
Edit: You would have to be really tall to be able to reach that touchscreen on the side of the door.
Me too, more engines in general would be amazing!
I’m just waiting for hybrids... and even better full EV.
@@KayJblue True dude they should do that
And also a proper diesel engine too, even though we can manipulate the system to make a diesel engine.
i didn't understand the point of the touchpad
I literally broke a vase in my house running to get to this video 😂
(I haven’t gotten this much likes on ANY of my comments before lol)
What???? Was it mailed to you?
@@Shadow79XXX It was.
I just *HAD* To see this video!
Lol
Was the vase ok????
@@HaXD1209 I had to get a new one 😅
you are so talented. when i make cars in this game they look like something a blind 2nd grader would design.
Just takes time... and alllllot of practice!
Bruh
@@TwinTurBros that's right! Practice practice practice! If you do it enough you'll get it right!😀😉
Automation needs diesel, I'm not ashamed of saying it, but i love diesel
Oh yes! I always struggle to make low revving engines so this is usefull
Some the of the vehicles he builds honestly look better that real ones such as this truck. It's a beauty.
Thanks bud, I appreciate the awesome comment :)
You should make a 1985 Raider it would be really cool to make a timeline for the Raider
Industrial mechanic here. I love how you got half of the specs pretty close, and the other half way off. 😂 Entertaining video nonetheless, subscribed! 🔥
Ehhh thanks bud. Im not a professional by any means so yeah some of it is oof XD
What are those grill fixtures you used at 9:26? I assume they aren’t part of dog tape, so can you please tell me what they are? I want to use it on my own vehicles.
The mod is called patchwork!
I use it with a few other epic mods steamcommunity.com/sharedfiles/filedetails/?id=1951185496
@@TwinTurBros Thank you for providing the mod. My vehicles look so much better using it!
No problem bud! Happy to help
Bro this is amazing ford and chevy needs to give you a contract no cap 😂
This man is obsessed with automan and I love it!
insane build! I could actually see a company making this!!! Great job.
Pls build a towing truck :)
You should send this design to Ford and see if they take it and tweak it a bit and give you most of the money made off of it. Then you will actually become a car designer from games
That would be pretty cool XD
Id love to be able to do that for a job!
Steering is probably bad because it's got the diffs locked! Good video though!
You should build a pickup truck following the design concepts of hyper cars. With carbon fiber body always using the strongest and lightest materials even on the engine block. Imagine if Lamborghini built a pick up truck? Please do this build
Cool build. Are there any tutorials on how to create those front and rear light sections?
Regarding maneuverability: in a curve the inner wheel will rotate slower than the outer wheel. With the differentials locked, the wheels rotate at the same speed. The tighter you turn, the more you will experience this "contrast" between the differential forcing the wheels to rotate at the same speed, and the speed difference (between inner and outer wheel) required to make a turn.
Wait till this guy finds out about the 7.3 international
that understeer at 22:03 reminds me of driving an armoured truck with no ABS, if the front locks up you're going through whatevers infront of you
That's a damn good looking truck. I don't even like trucks.
@TwinTurBros, if you want I can share some tuning info in the camso_engine.jbeam to make it more realistic of a diesel. "Rolling coal", a slower rev, deeper tone, etc
When do we get the Harriet Raider sport edition (like the SVT Raptor)
In the future something like that :D
Can you build an old f1 car?
(Something like 1990 or 1980)
It’s so awesome to see the process of building this truck and then I can download it once I get back in my pc! Didn’t find you till now but you have my sub!
I actually love the way it looks ngl
So, you're keeping with the theme that Harriot makes large engines. Nice consistency!
Harriet = Massive engines, massive price, massive looks
More Harriets to come :D
Yo in europe you’d need a CDL to drive the truck ALONE 😂😂😂
Yuppp, it is absolutely bonkers weight XD
Arent American trucks something?
Could you maybe make a boxer 6 1000hp~ hypercar??
So after watching this I made a diesel although mine I made a 5L I6 with 30lbs of boost 400 lb ft and 202hp.
Any way I can send you the engine or specs for you to do sort of a “review” on?
It’s got no VVT running 15:1 compression and actually sort of sounds like a diesel with a pretty flat torque curve. So far just the engine built, it’s not put into a truck yet.
Can you try making something with a one:one ratio
That is on my todo list :D
I really want FWD and XWD in automation
Whoa, where can I get those fixtures you used to model the design, holes, etc? Really awesome how they change the game.
Can you make a video with all your mods? I really want those headlights mod and some other interesting mods
Love these videos! Is there any way you could make a video or Steam collection or all the mods you use?
babe wake up new harriet dropped
An other well build build
i can smell my laptop burning through my chromebook screen (at school rn)
Definitely a ford f250 body
It really looks like the ford f150
there’s a reason diesels don’t usually go off-roading
This thicc boi weighs more than some armored cars...
next time it wowed be cool if you made a dragster.
A dragster is on my todo build list :)
I manage to make 15:1 compresion. You need to adjust igniton timing and turbo(if you use it) for that and you must use 100 octane number
Why do you sound like a younger version of my Chem teacher?
To make it sound like a diesel make it knock a little bit
it would be awesome if they had a Tandem rear axles DLC package with 4 wheel drive body stretching available for said mod on all the vehicles and a more extensive international list of vehicle body types even Russian and American and British and Canadian Arctic Crawlers
😹the vacuum cleaner truck
Nice truck
I really enjoy these builds they are awesome :) Joined at 19.6k.... waiting for that 100k subs you deserve it
f350 noice
Where do you get these mod bodies? Could u answer me plz?
On the steam workshop :)
can u make video of all the car u had make
Bro just made an f250
This looks a lot like the Nikola Badger
Thats where I took inspiration from :D
The headlights are the new 2021 F150!!
fun fact: inline engines dont have claustrophobia
you should use beam.ng mods to actually give cars the specs they need. I dont ever use the base model of an automation car cuz it always sucks. I've got a handful of mods for beam that let me fully customize every car and add anything, so I just add the correct engine, in this case an i6 7.0l diesel, and other things to actually make sure the car is realistic, and then just save that preset. I wish automation had a 1:1 ratio when porting to beam.ng, but that would mean theyd have to add all of the realistic parts and shit from beam to automation, and most of those parts are mods, for me.
😢💩😩💩😩
I wonder if you could build a competitive Pro 2 or Pro 4 truck that is comparable to the trophy truck or the Hilux Prerunner in beam.
is there a list for all of your used mods? or mods you use for automation?
steamcommunity.com/sharedfiles/filedetails/?id=2178945439
heres a list to all the mods I use!
@@TwinTurBros thx
do a key car with a 1.0l engine with power to beat super cars
Am I the only one that think modern vehicles are most of the time over styled monstrositys (the cars you make look so polished)
I think alot of companies make their cars very overstyled nowadays... I try to not do that (But sometimes i cant help it XD)
Ok but what abt a diesel V8 because when you referenced the Cummins, that's what the modern Cummins are, V8 Diesel Engines, also ford has the 7.2L Diesel and you could've built that lol
Yes, an truck is chonk.
In a diesel engine, the stroke is usually more than the bore.
That's where all the torque and low rpm comes from
Hey twinturbros, do you mind listing all or your automation mods in my reply section?
steamcommunity.com/sharedfiles/filedetails/?id=2178945439
here is a collection of all the current working mods for open beta version of automation!
Im using pretty much all of these!
Thank you
Did you know you can change the Speedometer to MPH?
Simply go to the settings, Find where it says Imperial or Metric. and change it to the opposite. (Metric: KMH. Imperial: MPH)
The settings wil be in Options > User interface. They should be the second option.
(in no way am i bashing you and your choices, im just giving a tip in case you didint know.)
He uses KMH normally, and it should default to mph, but ok
It never gave me MPH first when i started up the game but i guess thats just me.
12:40 music from need for speed most wanted 2012
How did you learn to design cars and trucks like this
Allllllot of time and a passion for cars!
if that was real i would buy it
How do u get to make ur own like this I can’t figure it out
3 hours making a virtual headlight? What do you do for living?
virtual headlights i think
About 3 hours to do the whole thing. but most of that time is just thinking about the design :P
videogames and videos are a hobby. I work a pretty boring job LOL
MORE LITERS
NOW
More = Better
@@TwinTurBros th-cam.com/video/z58Jblci5cQ/w-d-xo.html
8.8 liters of chevy v8 yeet
8th and #winnipeggang
Why didn't you use the quality sliders?
OMG u are growing so fast! I remember when u had like 300 subs!
Ehh it was only a year ago too :D
so much has changed XD
@@TwinTurBros i'm on TH-cam for 2 years and i have only 218 subs
I wouldn't call it a raptor, it's more like an F250 Tremor.
Should have made it a 2000 Ford F-250 or 350 Bc those had a 7.3 diesel
Can you stop being so fucking good at designing cars?
you did a better job on the headlights than ford
You see, where you messed up was keeping it that overhead cam garbage instead of the pushrod
Has he EVER used hydropneumatic suspension in any of his videos? That's probably the best one for off-road driving, because it's really nothing but an early form of active suspension. Stronger and overall better than air, besides the fact that it's inherently balanced, even without a computer.
I have for some hyper luxury cars iirc. But not often. Most cars are pretty traditional suspension types tbh XD
@@TwinTurBros it works well for pretty much anything, if you tune it the right way.
in sweden if a pickup is rated as 3500 kg with driver and fuel you can`t use it without having a c-lisense, b-license is rated up to 3500 kg a c-license is rated from 3500 kg to about 50`000 - 60`000 kg only for the driving veichle, if you want to ad a trailer you needc to get a be or ce license ( be = car with a trailer at max total weight of max 3500 kg ) ( ce = truck/lorry with a trailer up to about 50-65 metric 5tons on swedish rounds but tecnicly the limit is only the truck itself and road bearing weight.
No wonder why it won't turn.. you locked the diffs Hahaha
CraP
I legit always forget to turn off the locked diffs LMAO
Wheels look quite bad, u didnt had to make em like a damn monster truck
Most engines, like 99% of modern engines use a 4valve train, 2,3 and 5 are pretty dead. 2 because flow. 3 because flow. 5 because flow.
They flow to little or like 5valve doesnt make sense compared to 2 bigger intake valves, while producing less turbulence.
And diesel also run aluminum blocks with steel sleeves for thw block. So you get lighter, better thermal conductivity and 4he strong iron sleeves for the big boost and torque of a diesel
i have real diesel engines in Automation and more tourqe
note. if you want make a diesel motor make it with the 6 inline you will get more tourqe on lower rpm
The devs ain't done much for a long time. I get it it's an early access but it's about time they added other engines like diesels. Everybody's been asking for diesels for the longest time.
Great video tho, sorry for the rant.
If you wonder why they're not doing diesel right now, then check out their FAQs.
@@MichaelLawrence-dv3dn yeah last I read was because cause they wanted to stick to "regular" vehicles yadda yadda. Thing is here in Europe diesels are massively popular and it would be excellent to be able to play with diesel engines
@@jonytube Hopefully they will someday do it.
Why does this look so much like the nikola badger truck?
Ive taken alot of inspiration from it :) But also lots from Ford and my own cars!
I think that any knowledge on the suspension area
A lot of trucks have air suspension.
Масла, хочу масла, маслаааа
Bruh can you make that in real life 😂
7th
Is it just me, or does the front end look like a 2021 F150?
I can see it a bit. Lots of new trucks look quite similar imo :P
what is the truck body mod name?
Make it a v8