Hi, I think it would be interesting to do small engine racing... Maybe limit number of pistons. I think single piston engine would make for interesting race.
You need to do a Butch designing the car and you designing the engine and driving. To make the same style video, make 2 cars that way and then compare.
Those are both very nice race trucks. Kosmo, your engine is great and would probably be even happier with standard or premium fuel and higher compression. And there is also the option of just slapping a race muffler on the thing to keep the noise down a little.
If you didn't know, the jeep/AMC 4L comes from a modfied AMC 256, modified by VAM as a replacement for the V8. AMC liked it so much they ended up putting it into the jeeps.
Balancer mass is not only weighted against the rotating mass, but also measured by a lot of trig to give force vectors and the like. Automation doesn't provide any mechanism to measure that, so guesswork is the key I guess. If you want to hear a near realistic audio of most engines, go check out AngeTheGreats' Engine Simulator. Check out his YT for info. Race engine running only 9.1:1 compression? I'd bump it up to around 11:1 and run higher octane fuel, myself. This is a clear case of "for each problem, its' own solution". Each machine has its' place and its' purpose. "All I want fer Christmas is ma two front wheels" lol
I know its a late comment, but I suggest going to the 4 graph mode The first is just your power curves second is your ron usage (if tuning for power you can go to I believe about 1% over ron usage before losing power, anything over costs power for fuel efficiency) 2 is the usage of all your main systems, so exhaust, headers, intake etc and helps you push them based off rpm for your desired power (it isn’t the most accurate but close) Finally you get the turbo graph which just shows you your boost against rpm (increasing turbine size pushes the point the rpm line starts to make power as well as reduces compressor surge, compressor expands the open area more and reduces compressor surge, forgot the name but the 3rd one shifts the whole open area further to the right allowing for more power before your turbo says buy and reduces compressor surge as well. Finally boost pressure just increases boost or the max height of the line)
That Tokyo Drift cut away is exactly how I feel when people go on with specific details of their upgrades, just tell me what is upgraded then let's drive!
I decided to make my own version of this idea before watching your build. Went with a nitrometh tuned 8.4 Liter viper engine pushing 2300 horsepower. Definitely a different design philosophy 😂
it turned out way better than expected haha. it's also ridiculously fun in RWD which I didn't do much of in the video. I should upload these on my Discord for people to try.
You had a lower gravity acting on your car than him, thats why you could make it up... You can see it when you are rolling that the height you are getting is too much, strange that its not synchronized...
Kosmo's truck is so loud lol. At the very end I couldn't even hear Bitch's truck. Loved the video. You should do a rear wheel drive race car challenge with Butch for the next video.
you should make something like a 4L v16 and get as much rpm out of it as you can while using super agressive cams, make crazy high end power just for fun
It's a game called Automation, completely separate from BeamNG, but it lets you export the cars you build in that game into BeamNG which is fantastic! :) Have fun!!
I would love to get the .car file for your truck, looks fun. I also want to customize its look and make a pre runner out of it. Just adding another project to my long list of builds I got going.
Hasn’t been said so far so I will say it, but the cardboard is actually clay because cars are sculpted out of clay when they make them in real life before they produce them
Check out Butch! th-cam.com/video/mqeZZr1RTcI/w-d-xo.htmlsi=v-MEn5pxBsldfq_5
Merry Christmas and happy a New Year Kosmonaut
Thanks Kosmo! Had a blast working on this truck and racing!
Mod in the description?????
My favourite vehicle is a ferd not ford fords suck
Hi, I think it would be interesting to do small engine racing... Maybe limit number of pistons. I think single piston engine would make for interesting race.
Makes me wonder if there is a single cylinder mod for the game!
Or maybe limit the engine size to something like 500cc idk really but cool idea
Yeah, I would
True
@@darealkosmo
@@darealkosmo Sadly there aren't and devs said probably never will be mods like that for automation.
You need to do a Butch designing the car and you designing the engine and driving.
To make the same style video, make 2 cars that way and then compare.
I love when you do automation.
Those are both very nice race trucks. Kosmo, your engine is great and would probably be even happier with standard or premium fuel and higher compression. And there is also the option of just slapping a race muffler on the thing to keep the noise down a little.
yeah but the loud noise is kinda the point. lol it's supposed to be a loud offroader.
Hey, look up AngeTheGreat's engine sound simulator. It does make those engines sound good
I'd love to see a pull competition in this (if it's possible in beamng) where you hook up hitch to hitch and see who can out pull the other...
Kosmo, did you wake up this early, or the more likely option, you should've been sleeping 4 hours ago?
correct.
@@darealkosmo Ah, see now I understand why you always upload at like 4 in the morning…
Its bootleg Ford 😂😂
Ferd
Forb
Forg
Furg
As a ford tech i can say its still better than a real one :)
I thought you would have done somethibg silly like a 10 liter V-Twin. This build reminded me of the Top Secret V-12 Supra.
Kosmo: *makes the engine 7.9 liters instead of 8*
Perfectionists: *cries of agony*
7.999 is actually equivalent to 8.000 in base-10, so yes, in mathematical terms, this is an 8L engine.
7.999 isn't equivalent to 8.000, it's 0.001 smaller. 7.999... continuous is equivalent to 8.000.
If you didn't know, the jeep/AMC 4L comes from a modfied AMC 256, modified by VAM as a replacement for the V8. AMC liked it so much they ended up putting it into the jeeps.
Balancer mass is not only weighted against the rotating mass, but also measured by a lot of trig to give force vectors and the like. Automation doesn't provide any mechanism to measure that, so guesswork is the key I guess. If you want to hear a near realistic audio of most engines, go check out AngeTheGreats' Engine Simulator. Check out his YT for info. Race engine running only 9.1:1 compression? I'd bump it up to around 11:1 and run higher octane fuel, myself. This is a clear case of "for each problem, its' own solution". Each machine has its' place and its' purpose.
"All I want fer Christmas is ma two front wheels" lol
I know its a late comment, but I suggest going to the 4 graph mode
The first is just your power curves second is your ron usage (if tuning for power you can go to I believe about 1% over ron usage before losing power, anything over costs power for fuel efficiency)
2 is the usage of all your main systems, so exhaust, headers, intake etc and helps you push them based off rpm for your desired power (it isn’t the most accurate but close)
Finally you get the turbo graph which just shows you your boost against rpm (increasing turbine size pushes the point the rpm line starts to make power as well as reduces compressor surge, compressor expands the open area more and reduces compressor surge, forgot the name but the 3rd one shifts the whole open area further to the right allowing for more power before your turbo says buy and reduces compressor surge as well. Finally boost pressure just increases boost or the max height of the line)
Don’t mind the size of this, just love this game and hope this helps someone building an engine
That Tokyo Drift cut away is exactly how I feel when people go on with specific details of their upgrades, just tell me what is upgraded then let's drive!
its been a while since i have made an engine in automation. seeing all these new settings makes me want to go make a vehicle and engine in it again!
Man I really dig these videos. I like the ugliest car idea, but what about sleeper cars? Looks like a family sedan, drives like a bat out of hell.
9 to 1 compression is really low for a high hp na engine with port injection 10 to 12to 1 direction injection can do 12 to 14 to 1
I decided to make my own version of this idea before watching your build. Went with a nitrometh tuned 8.4 Liter viper engine pushing 2300 horsepower. Definitely a different design philosophy 😂
You should try and do a 500cc or less challenge
i love these videos
7:00 you can use the fuel map and run leaner in order to reduce the octane without changing fuel or compression
Is it just me, or does this sound like an fxx k? Also the F350 body looks awesome. It seems strangely right with that v12 sound
it turned out way better than expected haha. it's also ridiculously fun in RWD which I didn't do much of in the video. I should upload these on my Discord for people to try.
whats the map?
Johnson valley
Gotta start using bullet blocks! I had a bullet block in my race Corvette. Light and got me 1000rwhp.
For the ugly car idea you should both pick 2 bodies each. Then spin the wheel of shame to randomly pick who gets which and make a car with it.
You had a lower gravity acting on your car than him, thats why you could make it up... You can see it when you are rolling that the height you are getting is too much, strange that its not synchronized...
Butch had the better suspension setup for the woops that is for sure.
I like the automatione
iz gut
What a way to end the year!
Kosmo is this time to post a video? go sleep a bit it is important! Btw I loved this you should make more Automation videos
I wish they allowed narrow angle v6's like the vr6 and w8's, w12's.
Just a note, flow values for exhaust and intake should be as close to 100% as possible to increase efficiency, ie power
The Ferd and Stranger are special in their own way
Honestly I'd gladly drive the FERD F-420.
Challange Idea make racecars with 50 hp max
Kosmo's truck is so loud lol. At the very end I couldn't even hear Bitch's truck. Loved the video. You should do a rear wheel drive race car challenge with Butch for the next video.
20:16 it looks slammed lmao
That thing is a menace
I have that engine in my Jeep and I didn’t even know about it that’s so cool! It’s the 1997 Jeep TJ Sport (AMC 4.0 6 cylinder)
You could do it with some more people? Could be fun.
Big truck
The Tokyo drift clip Is the cherry on top
What map is the sand dunes?
One idea is to build cars to historical regulations,(FIA Appendix J for example) and compete either on a circuit or rally course, or both.
you should make something like a 4L v16 and get as much rpm out of it as you can while using super agressive cams, make crazy high end power just for fun
9:30pm here almost next year
Same here.
I think when you add exhaust tips it should snap the pipes to them.
Baha blast ;)
I love how low it maxes out at
Erh mer gerd! Ehts Ferd Turf!!!!!
20:51 4low was created for this
Hey Kosmo I believe that the noise is decibels
I built a 9.8L v12 dohc out of 2 ford 300s
And a few v12 based on my bored and stroked 300 at 4.200x4.400 stroke lol woth turbos
Happy New Year Kosmo.
Quick thing, thing that’s not a OBS, I believe that’s a dent side ford
who else saw the wheel flying at 22:53 😂😂😂😂
nobody:
the freaking wheel taking flight
2 300 i6 joined at the crank would be 9.8L. Try that next time
I’ve noticed that on the automation vehicles, the wheels are way too eager to fly off lmao.
So this is the XJ-350? Since it’s to 4 liter 6 cylinder
My 4.0 i6 reved out to like 7300 rpm thing was crazy
Hi buddy! Hope 2023 have been kind on you and that 2024 is even better 🎇
A strictly drag racing challenge
Higher the compression, the higher, the octane, the lower, the compression, the lower the octane
Shouldve named it 'Temu Ford'
where do you build the engine
is this in beamng?
i want to do this too but dont know where
It's a game called Automation, completely separate from BeamNG, but it lets you export the cars you build in that game into BeamNG which is fantastic! :) Have fun!!
@@darealkosmo thanks i'll try it later
That's a lot of motor!
Next do two v6 insted
I gotta say kosmo wins just with the sound alone! A truck that looks like that should not sound like that 😂
Video Idea: Do reverse sleeper (looks mad but performs terrible). I think that would be cool.
Shoulda done both baffled or something on both of those exhaust
I would say bushes truck looks better, but your truck with a V 12 I picked that one for drag
you sshould do v10 racing and you should do the lfa engine
i challenge you to the Finland back woods rally on snow and ice XD recreate the B-class monsters.
What map is this its very cool.
"no current warnings"
Bro i make my engines on the verge of exploding😭😭
lmao
What map is this?
Is that a private mulitplayer server? Also if it is does it allow ur mods?
I love how your making videos with smaller creators then you
*a tug of war match wouldve been nice, but good video*
I’ve wondering whats the largest engine stroke and bore that you can build with the least amount of Cylinders.
I wish I could play beamNG
I was really hoping this would be a diesel video
cuzin, you and I both. But Automation doesn't have diesel capabilities yet :(
@@darealkosmo good to know maybe some day. Still love the video. Colabs are 🔥
@@Daniel-oy4gu thank you for the support man!!
try to get camodogaming to do this with you basic cars though he doesnt make cars like this
i like how he joined an arabic server for using the doons
map?
18:15 ههههههههههههههههههههههه هحولة ٢٠٢٠ السعودية
Built ferd strong 💀💀💀💀
Your buddy built the biggest motor possible and doesn't know how to off-road. 😂
You should have tried to rebuild the 7.3 power stroke and upgraded it 😂
I would love to get the .car file for your truck, looks fun. I also want to customize its look and make a pre runner out of it. Just adding another project to my long list of builds I got going.
I usually post the car files on my Discord after the video goes up :)
@@darealkosmo ohhh, cool just joined and ask if you did, could you @me where it is in the server.
Nevermind I found it, only had to look inside of 2 channels and git lucky with my guess, lol
dude 10 to 1 is the ratio you want atypical modern motor
Roads, where we're going we don't need roads.
Hasn’t been said so far so I will say it, but the cardboard is actually clay because cars are sculpted out of clay when they make them in real life before they produce them
FERD
11:00 i would guess db
i think his car looks better but your engine is better tho im more of a lower reving engine and more gears kinda guy
ferd f420 was the best
What is the map
23:53 (top left) Toxic sand dunes