What’s up everyone! I had a few subscribers reach out needing help on the freedom wolf slide lock so here’s a quick video showing how to do that. Enjoy and make sure to hit that like 👍🏼 button.
Hand rack it a few dozen times really hard to break it in. Lube it up as well. Should fix the problem does for me every time. If it’s still doing it check the channel on the frame and see if you need to take out more material. Let me know if it helps you out with the feeding issues.
@@GiuseppeBerna just make sure u sand enough material out the frame and put internal parts into the correct places , and u should be good u may encounter minor issues tht can be fixed but thts ain’t rlly nun to stress about it’s all about the journey
Make sure there’s no debris inside. Also it helps to angle it in with some needle nose pliers and finish it off with pushing it all the way down to get it leveled with the channel.
I’m trying to understand why it won’t fit. Do the parts look like mine? If so then there’s something your not doing to get it installed. Are you doing exactly like I’m doing in the video? Because more then likely you have the right parts unless you have the wrong slide lock spring causing it not to go in.
Literally went thru 10 videos and none of them helped but you did thank you 🙏🏼
Bro a life saver literally. All other videos did not show this kind of spring and you’re the only one! Thank you!!
Glad I was able to make a difference and help you out. I appreciate your positive feedback. Your welcome!
Thank you for this clip. The videos on TH-cam were not showing how to put the spring in. Helped me big time.
man your a life saver u did this so easy and flush everybody else made it seem hard
Glad I could help! Make sure to subscribe and like. It really helps with my channel from being censored. Have a great time shooting! Cheers
@@lunaticrider209i just subscribed amazing channel man keep going u make this stuff look easy
U helped me bro, the last guy put in on upside down I followed ur instruction now is works how its supposed to 🙏 thanks man I was gonna sell it
I appreciate your positive feedback. Glad I was able to help you out. Enjoy and have fun shooting it. 🤙🏼
Appreciate the gem 🫡
Thank you !
Welcome!
😅 I had my upside down for a while before realizing it 😅 I was on the toilet taking it apart and it caught my eye 😅
thank u brother
What if the spring goes down into the frame and staying there
What’s your question?
my spring is sitting to low and loose like i can install the lock without having to push it down, n it’s new
I can’t help without seeing what size it is. Can you make a video showing me or send me a picture to my work email and I can better assist you.
what was your issue i have the same problem with two different lower parts kits
the polymer frames don’t have that lil part
did you figure some out bro
@@448Sak yeah everything else functional just having feeding issues now
Hand rack it a few dozen times really hard to break it in. Lube it up as well. Should fix the problem does for me every time. If it’s still doing it check the channel on the frame and see if you need to take out more material. Let me know if it helps you out with the feeding issues.
@@GLOCKZSFI’m building mine rn wth do I do?
@@GiuseppeBerna just make sure u sand enough material out the frame and put internal parts into the correct places , and u should be good u may encounter minor issues tht can be fixed but thts ain’t rlly nun to stress about it’s all about the journey
So mine wont stay seated (posted a vid for those who can help me out) i did order another one so hopefully its just an issue wit the part itself
i think mine is bent wrong could yu help me?
Upload a video of what’s going on and I’ll take a look.
Mines keep falling out
Do you have the right spring?
I’m having issues mine won’t lay flesh/flat
Make sure there’s no debris inside. Also it helps to angle it in with some needle nose pliers and finish it off with pushing it all the way down to get it leveled with the channel.
I used a paperclip cause mine fell out lol
Hey man what ever works right! I use a lighter safety shield works pretty good and still going lol
Not go lie im still having problems with dis is it a way i can use some else for dat part because da gun fix its just that part
What are you having issues with? @Jayfrm65
@@lunaticrider209 my gen 3 slide lock act like it cant fit so im wondering what else can i try to use before i start buying alot of stuff
I’m trying to understand why it won’t fit. Do the parts look like mine? If so then there’s something your not doing to get it installed. Are you doing exactly like I’m doing in the video? Because more then likely you have the right parts unless you have the wrong slide lock spring causing it not to go in.
My spring won’t go in
You try doing it like I did? Do you have the correct spring?
thanks alot bro this helped alot iwas bouta throw th glock at the wall :/
Glad you found this helpful.
Thank you!!
Your welcome! Hope everything comes together nicely. Have a great weekend and lots of fun with the build. Thanks for watching. Cheers!
Thanks to you… everything is coming out fine. Have a good weekend.