Polymer 80 Pistol Blanks - January 2023 Update

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ม.ค. 2023
  • There has been a lot happening with Polymer 80 and the ATF over the past 12 months. The ATF issues a ruling in August 2022 that required some changes from Polymer 80 to stay in compliance. In December 2023, the "Compliance" line was moved a little further. We stopped by the booth at SHOT Show 2023 to get an update from CEO Loran Kelley and see how things are evolving.

ความคิดเห็น • 221

  • @kellydardeen6308
    @kellydardeen6308 ปีที่แล้ว +157

    Didn't Know The ATF Had The Power To Legislate Laws... ? I Believe There Job is To Enforce The Laws Passed By Congress !

    • @chilkattgear5800
      @chilkattgear5800 ปีที่แล้ว +16

      It’s called executive law. They can make a law, and enforce it, until it’s challenged. It’s messed up, and why our fight will never be over.

    • @jbsack
      @jbsack ปีที่แล้ว +9

      Apparently, in the Biden administration they can….. lol

    • @deucedeuce1572
      @deucedeuce1572 ปีที่แล้ว

      They don't. Supreme Court ordered an injunction against them for this... but I'm sure Polymere80 will cowardly continue to obey them, even when they don't have to. Just like bump-stocks, cowards would stop selling them, even though there's no law that says they can't. We're so cowardly a nation that we even obey "laws" that don't even exist.

    • @kellydardeen6308
      @kellydardeen6308 ปีที่แล้ว +3

      @deucedeuce1572 So Did You Watch The Video ? If You Did You Would Know That He Has Already Filed Lawsuits Against The Attorney General and The ATF and He is Confident That They Will WIN ! in Court. But For Now He Has Employees With Families To Keep Employed as He Feels Responsible For Them and Even Though it's Costing Him a Lot Of Money to Re-Tool He Has To For Now To Comply To Keep His Company in Buisness ! I Have Nothing But Respect For This Man !!!

    • @timoliver1004
      @timoliver1004 ปีที่แล้ว

      The politicians advocated their responsibility to unelected government agencies and just sell influence now

  • @jtuttle11
    @jtuttle11 11 หลายเดือนก่อน +15

    The ATF 'Final Rule on 80% frames and AR lowers has been thrown out!

  • @Go2Sleep87
    @Go2Sleep87 ปีที่แล้ว +15

    Pretty soon they’ll just ship you a single block of polymer with a note that reads 🤞.

  • @jll9764
    @jll9764 ปีที่แล้ว +14

    This man is what every business owner should strive to be!

  • @ekzoskelitN
    @ekzoskelitN ปีที่แล้ว +41

    Mr. Kelley seems like a chill guy but also upstanding. Good discussion, and thank you for your early coverage on P80.

    • @Bearcotraining
      @Bearcotraining  ปีที่แล้ว +8

      This was my first time meeting him in person but we definitely had good conversation on and off camera. He is passionate about what he does.

    • @steveo6685
      @steveo6685 ปีที่แล้ว +1

      @@Bearcotraining do ALL these NEW frames have serial numbers on them NOW?????

    • @steveo6685
      @steveo6685 ปีที่แล้ว +1

      @@Bearcotraining PLEASE let me no, I’m trying to open my own gun shop and sell ONLY polymer 80s because I love them Sooo much, great video

    • @Bearcotraining
      @Bearcotraining  ปีที่แล้ว +1

      @@steveo6685 That is my understanding. You can always check directly with Polymer 80 on the latest. www.polymer80.com/become-a-dealer

  • @MissingLinkMTB
    @MissingLinkMTB ปีที่แล้ว +6

    Love my P80's. Just ordered more now that they're back up on their site and on sale since the injunction passed. Anybody (well, you know) can go to a store and buy a firearm, but to make your own and customize it during the building process to make it unique to you is just so rewarding.

  • @mac8080
    @mac8080 ปีที่แล้ว +18

    Basically what this insanity that the ATF is doing is elevating the skills of millions of armature gun smiths because none of us are ever going to give up our freedom, we will just become better machinists and with that we will get the ability to build even more firearms Can't way for the 80% .50BMG :)

  • @huntercampbell9603
    @huntercampbell9603 ปีที่แล้ว +2

    Well spoken sir! Great representative and great video!!!

  • @LYLEWOLD
    @LYLEWOLD ปีที่แล้ว +28

    For those of us that live in states where we can't buy gen4s and gen5s, P80 is awesome! Even compared to my gen4 19, I still like the grip of my P80s more than any on my Gs. Thank you P80 for all you do. (edit - and if you ever wanna do a compact full frame, ala g29 or g30, I would be glad to test those for you. just sayin')

    • @LaRuta.Ovrland
      @LaRuta.Ovrland ปีที่แล้ว

      What p80 frame do I have to use to build a 5gen? 19

    • @flintstriker2791
      @flintstriker2791 ปีที่แล้ว +2

      @@LaRuta.Ovrland I think they're set up for gen 3 components. The ergonomics are beyond gen 5, with stippling, trigger guard undercut, beavertail, & a nice straight grip.

  • @justinholmes5328
    @justinholmes5328 ปีที่แล้ว +12

    Thank you for standing for freedom and our constitutional rights.

  • @4hunnuuhh334
    @4hunnuuhh334 ปีที่แล้ว +6

    Man I love Mr. Kelly & The Whole Polymer80 team

  • @yo_stephen
    @yo_stephen ปีที่แล้ว +2

    Anybody know of any guides for the new lower? < I’m new to this

  • @thebluestig2654
    @thebluestig2654 ปีที่แล้ว +10

    I'd just like to see them branch out into frames from other brands instead of just Glock and AR. Maybe something like a polymer Browning High Power frame, or a polymer 1911 frame.

    • @drmachinewerke1
      @drmachinewerke1 ปีที่แล้ว +2

      A Taurus g2c frame. And a 1911 frame

    • @pepepantuflas1
      @pepepantuflas1 10 หลายเดือนก่อน

      They got aluminum 1911 frames

    • @thebluestig2654
      @thebluestig2654 10 หลายเดือนก่อน

      @@pepepantuflas1 They're expensive, and a major pain in the backside to accurately install a slide correctly. It's the most involved process out of all 80% builds if you don't have a digital milling machine.

  • @kilorodriguez7885
    @kilorodriguez7885 ปีที่แล้ว +4

    polymer 80 changed my life in positive ways only this guy knew i was a cnc machinist without me telling him 👍🏻👍🏻👍🏻👍🏻🤜🏽🤛🏽

  • @US2A
    @US2A ปีที่แล้ว +7

    My p80 unboxing got a strike, me milling a lower and nothing 🤔

  • @Mad_Marx
    @Mad_Marx 9 หลายเดือนก่อน

    When will they start shipping again? I purchased mine 10 months ago….. still haven’t received so much as an email, let alone any parts.

  • @scarredxshinobi7341
    @scarredxshinobi7341 ปีที่แล้ว +3

    I hope we can get better rails as well

  • @luciankristov6436
    @luciankristov6436 ปีที่แล้ว +1

    Ive built a ton of P80 glocks and milled my own AR lowers even though im an AK guy. Built my own stamping jig and for AK recievers. Now i just 3D print my own glock lowers. Not exactly the best but they work for a decent amount of rounds 1000+

  • @metro8974
    @metro8974 ปีที่แล้ว +17

    Im behind polymer 80 all day i love building my own custom glock love u guys keep pushing forward

  • @BooBooFrm1100
    @BooBooFrm1100 ปีที่แล้ว

    What day of this month is it suppose to be released?

  • @5upgunplay551
    @5upgunplay551 ปีที่แล้ว

    I like in Tx and own so many different rifles ARs glocks and my favorite are the ones i build. P80 a GGP are my favorite such good looking firearms

  • @tdoc2651
    @tdoc2651 ปีที่แล้ว +1

    I wish they would reprofile the trigger guard to accommodate more holsters.

  • @anewbetterme9277
    @anewbetterme9277 ปีที่แล้ว +6

    First of all... I am a convicted falon. I did what I had to do to get my rights back and my concealed carry recently. It has NOTHING TO DO WITH BEING A CONVICTED FALON! I have been one of the most RESPONSIBLE gun owners that I know. It's not the convicted falons out here doing stupid things (abusing the 2nd amendment) with "Polymer80" or any other self built fire arms. Look at what the real problem is. It is definitely not Polymer80 frames. Smh

    • @devol01fm
      @devol01fm 2 หลายเดือนก่อน

      How is it possible you got your 2a rights?

  • @lashingsine6901
    @lashingsine6901 ปีที่แล้ว

    Are they gonna make new sub compact blanks that are compliant?!?

  • @Or3guns
    @Or3guns 10 หลายเดือนก่อน

    At 6:54 what slide and frame is that???

  • @UncleDanBand64
    @UncleDanBand64 ปีที่แล้ว +5

    Great video. I have never bought a P80 frame but, I am going to now. That gentleman is what America is all about.

    • @Fatboy-jn8gm
      @Fatboy-jn8gm ปีที่แล้ว +1

      You might not want to right now stupid hard to complete it because of the plastic that has to be removed I have two p80 builds and I just got the new compliant frames and they aren’t worth it had to end up throwing out

    • @UncleDanBand64
      @UncleDanBand64 ปีที่แล้ว

      @@Fatboy-jn8gm OH, thanks for the heads-up 👍

  • @theonecalledvino8165
    @theonecalledvino8165 8 หลายเดือนก่อน +1

    I got 2 of those Bridge Frame 76%. It's a Joy kill. By the time I got mine, The due date to exchange to 80% had past. Can't find any info on working a 76% frame. I get a little jealous of people with woking P80 builds

  • @skate166
    @skate166 ปีที่แล้ว

    did you make a new jig too?

  • @RichardNixion357
    @RichardNixion357 ปีที่แล้ว +1

    DEEZ NUTS Soup Group,
    and Merry Christmas.
    -P80

  • @allenhammer7923
    @allenhammer7923 4 หลายเดือนก่อน

    I got a G26 but it had no instruction what to remove or how to do it and the place for the take down spring does not exist? No video on sight to show you? How do I find out? Where is there a proper video? TH-cam ones were completely lame? Please help.

    • @mikestratton811
      @mikestratton811 วันที่ผ่านมา

      I'm in the same boat dude. Zero instructions, no videos anywhere. It's basically useless. Also, apparently there website is down now. I don't know if they are still in business. Emailed them a week ago and no response.

  • @martinrps13
    @martinrps13 ปีที่แล้ว +2

    So basically all the older kits are way better….good to know

  • @douglasphillips24
    @douglasphillips24 ปีที่แล้ว +1

    I didn't even know they sell these anymore. I want 20 of them lol. Love Polymer 80.

  • @chethaynes5802
    @chethaynes5802 ปีที่แล้ว +9

    Go Polymer 80 !

  • @stevehoffy597
    @stevehoffy597 ปีที่แล้ว +8

    On a skill scale of 0 to 100 the er old frame needed a skill of 5 and this one needs 110! I tried removing the trigger housing tabs with a dremel and blew through the frame! Good luck with this one!

    • @NO_QUARTER_GIVEN
      @NO_QUARTER_GIVEN ปีที่แล้ว +3

      That's why I bought 5 before August 2022 arrived

    • @drfroglegs
      @drfroglegs ปีที่แล้ว +1

      They are aweful and P80 won't exchange them now that they won the injunction. You would think $2 worth of plastic they would be willing to swap the bridge frame for the old style in the name of good customer service, but I guess not.
      Edit: I would like to commend P80. They offered an exchange program where those of us who purchased the bridge frame can exchange them for the original type for only $25 (including shipping). They even allow frames that have been damaged when trying to complete them. I'm very pleased and want to thank them for listening to their customers!

    • @abriseneau
      @abriseneau 9 หลายเดือนก่อน

      Dremel works just keep it on speed three max with a steady hand thank me later😎

    • @max_moto2877
      @max_moto2877 2 หลายเดือนก่อน

      @@abriseneauwhat bits are you using?

  • @CVEIWKID
    @CVEIWKID ปีที่แล้ว +2

    Polymer 80 should be known as the most American gun you can by

  • @macrueb3404
    @macrueb3404 ปีที่แล้ว

    Is this the Polymer80 store in Reno nv?❤🎉

  • @AngelXg831
    @AngelXg831 ปีที่แล้ว +1

    Will the new frames, be able to get ship to California due to it being a new frame?

  • @chasedavis2358
    @chasedavis2358 ปีที่แล้ว +1

    So this is the 76% frame?

  • @Unknown62656
    @Unknown62656 ปีที่แล้ว

    Anyone know where I can get p80 kit or Glock frames at in California

  • @LaRuta.Ovrland
    @LaRuta.Ovrland ปีที่แล้ว +1

    Quick question what P80frame do I need to build a glock 19 5thgen?

    • @KevinJames-yg9eu
      @KevinJames-yg9eu ปีที่แล้ว +1

      One that doesn't exist, since they're all 3rd gen.

    • @LaRuta.Ovrland
      @LaRuta.Ovrland ปีที่แล้ว

      @@KevinJames-yg9eu ???

    • @nahoxme
      @nahoxme ปีที่แล้ว +1

      @@LaRuta.Ovrland p80s only use gen 3 parts

  • @terronb718
    @terronb718 10 หลายเดือนก่อน

    Can someone give me a video on how to build the new frames 2023

    • @DLDafterDark
      @DLDafterDark 10 หลายเดือนก่อน +2

      Go to freedom crew university. I also have the jigs at DLD Hardware. Sorry I'm 7 mo the late lol Good luck

  • @mikedowney2168
    @mikedowney2168 ปีที่แล้ว +4

    The ATF doesn't make the laws!!

  • @Zosa_
    @Zosa_ ปีที่แล้ว +11

    God bless polymer 80

  • @jeffcron931
    @jeffcron931 ปีที่แล้ว +2

    I highly respect them for meeting halfway with dealers, this speaks highly on their morales. I do however wish they would have changed the style a bit but beggars can't be choosers.

  • @duckduckglowie9619
    @duckduckglowie9619 ปีที่แล้ว +1

    So this one is unserialized like the old ones right?
    And also where r u able to buy it??

    • @jeffreybrooks8643
      @jeffreybrooks8643 ปีที่แล้ว +1

      See the link on the Polymer80 website which directs you to their retail outlet Delta Team Tactical. Good luck!

  • @AnimeFan_2013
    @AnimeFan_2013 ปีที่แล้ว +4

    This is really interesting, this adds like an extra level/challenge to testing your gunsmith skills

  • @blueyedevil3479
    @blueyedevil3479 4 หลายเดือนก่อน +1

    This Man and the owner of Palmetto State are the types of leaders and business owners this community needs and should ABSOLUTELY Show our appreciation for.

  • @jamesgrace1146
    @jamesgrace1146 ปีที่แล้ว +2

    When will they be available and who will be selling them?

    • @KevinJames-yg9eu
      @KevinJames-yg9eu ปีที่แล้ว +2

      Now and from one of everybody's favorite dealers -- Delta Team Tactical.

  • @KeynSong
    @KeynSong 6 หลายเดือนก่อน

    No one is going to buy the bridge frames once they realize how much work is involved.

    • @GetShitDone-du6xd
      @GetShitDone-du6xd 5 หลายเดือนก่อน

      Not to mention no rails or pins included. Have to buy them for $100 and $9 pins from other vendors. P80 is robbing people blind.

  • @fvckjayskii7965
    @fvckjayskii7965 ปีที่แล้ว +2

    if anyone knows how to get that “bridge” out let me know i dont wanna use a dremel and mess it up at all!

    • @jminkvihubyb
      @jminkvihubyb ปีที่แล้ว

      I haven't done it so these are just ideas on how I'd try.. I'd use those cuticle snip things (idk what it's called) to get the larger stuff cut, then I'd use my torch to get a scalpel like knife red hot and slowly saw thru the excess before filing. I have a dentists instrument set & mechanical watch toolset that I'd pull out for some areas. it'll def be tedious. Btw I've cut stuff with a red hot knife before, you have to keep heating the knife over and over to get any results and I don't recommend lol tbh I'd just order one of gst's instead

    • @rawdawgg_
      @rawdawgg_ 8 หลายเดือนก่อน

      Did you figure it out? Curious how you went about it

  • @nunyabinness3574
    @nunyabinness3574 ปีที่แล้ว +1

    So now its a P65...😒

  • @d.archerofficial
    @d.archerofficial หลายเดือนก่อน +1

    So it’s not an 80% lower it’s a 90% lower, smh

  • @tgc.joshua
    @tgc.joshua ปีที่แล้ว +1

    Is it legal to purchase in California?

    • @ericcartman8716
      @ericcartman8716 ปีที่แล้ว +1

      Hell no unless the lower is serialized and you have a permit and you have to go through a ffl to get the lower

  • @tokshorts8407
    @tokshorts8407 7 หลายเดือนก่อน

    So is it Polymer 60 now 😂😂

  • @timothykelly2605
    @timothykelly2605 7 หลายเดือนก่อน

    Sorry I’m not intellectual enough to know how the hell you mill out that new area where trigger assembly sits. I’ve built dozens of p80s but this one stumped me.

  • @pezpengy9308
    @pezpengy9308 ปีที่แล้ว +5

    gosh, i like this guy! of course i would never EVER consider doing something so awful like finishing out my own pet glock. no sir! i worship at the altar of the atf! yup! thats my story and im sticking to it!

    • @elijahkeating5594
      @elijahkeating5594 7 หลายเดือนก่อน

      Sounds like we’re all happy 😊for now

  • @KinoTechUSA69
    @KinoTechUSA69 7 หลายเดือนก่อน

    Im glad he said who his customers are. Im a machinist and regularly finish 80's. I own guns on the books too, not a criminal.

  • @SaltyNationalist
    @SaltyNationalist 9 หลายเดือนก่อน

    Sooooo now it's a Polymer 60??

  • @edlam87
    @edlam87 3 หลายเดือนก่อน

    URL LINK ANY?
    G FILES DOWNLOAD LINK

  • @skinnypete5158
    @skinnypete5158 10 หลายเดือนก่อน +1

    Do they ship to California?

  • @matthewfluke7957
    @matthewfluke7957 10 หลายเดือนก่อน

    3:14 ✊preach brother

  • @CarrieWard-ny1zl
    @CarrieWard-ny1zl หลายเดือนก่อน

    I’m a dropout pot grower we can shred on the skateboard and the guitar building a polymer 80 was easy… but maybe that’s because I I was born in 76 And I know how to follow road signs from Little Rock to Sacramento without pulling out my damn phone….

  • @richardcurrin7812
    @richardcurrin7812 8 หลายเดือนก่อน +1

    I’d pay to watch Brandon, Dettelbach and others of similar ilk try to build a Polymer80 or an 80% AR

  • @stateofoklahomashallnotbei5469
    @stateofoklahomashallnotbei5469 7 หลายเดือนก่อน +1

    Fortunately rules are not laws..

  • @HennyManTactics
    @HennyManTactics ปีที่แล้ว +4

    I miss freedom how abou everyone else

  • @timothykelly2605
    @timothykelly2605 7 หลายเดือนก่อน

    How tf do I mill out that trigger pocket. I ordered like 5 of these not knowing that BS was in there. Been building p80s for years and never had a problem. I absolutely demolished one of those new “bridge”’products trying to open that area at the back. The other 4 are collecting dust

    • @PDudeJr
      @PDudeJr 3 หลายเดือนก่อน

      You need to put it in a vice and use a dremel. Drill press and crossvice works here in place of a milling machine. Good luck to you. It isn't easy. You'll probably ruin a few frames along the way. The best you can do is be patient and take your time. If you're really determined, you can accomplish this with a chisel and some files.

    • @max_moto2877
      @max_moto2877 2 หลายเดือนก่อน

      @@PDudeJrwhat dremel bits you using.

  • @TheBluePilledPebric
    @TheBluePilledPebric ปีที่แล้ว +6

    I’m good I rather just use my cnc machine to make p320 FCU lmao

    • @KILLERGRAVITY-sb3bh
      @KILLERGRAVITY-sb3bh ปีที่แล้ว +1

      Do you mean a 3D printer or actually a metal glock frame?

    • @user-ie4kp7ni9d
      @user-ie4kp7ni9d ปีที่แล้ว +2

      @@KILLERGRAVITY-sb3bh on a sig the fcu is serialized not the frame

    • @KILLERGRAVITY-sb3bh
      @KILLERGRAVITY-sb3bh ปีที่แล้ว

      @@user-ie4kp7ni9d aw ok I see thanks

    • @BangBang-hk4rg
      @BangBang-hk4rg ปีที่แล้ว

      Man, that would be sweet! 👍

  • @angelaguilar9717
    @angelaguilar9717 ปีที่แล้ว +1

    Can we order this from USA once released.

    • @ericcartman8716
      @ericcartman8716 ปีที่แล้ว

      Yup depends on what state you live in they will bring it right to your door if not the lower needs to be serialized and you have to pick it up from a ffl

  • @caseyne
    @caseyne ปีที่แล้ว +1

    Hopefully they use a different online retailer for the blanks. Delta team tactical is horrible.

    • @blackcatgitch6948
      @blackcatgitch6948 ปีที่แล้ว

      Elaborate

    • @chasebenji5708
      @chasebenji5708 ปีที่แล้ว +1

      I had ordered a frame 2 weeks before this recent ban , they didn’t ship it in time so I couldn’t get the frame because they took so long & the ban happened

  • @bkslsh
    @bkslsh 10 หลายเดือนก่อน +1

    I placed an order with them when they were running a sale back in March, and never heard from them again. Not sure where they are at with everything but any update would have been nice. At this point I just consider my order as a donation to their legal battle with the alphabet boys.

    • @jiggityyjake2992
      @jiggityyjake2992 9 หลายเดือนก่อน +2

      Same man I got my glock 26 version but never received the glock 19, been waiting since March 28th.

  • @damahom92
    @damahom92 ปีที่แล้ว

    So can I build this in WA state?

  • @playboidom8717
    @playboidom8717 ปีที่แล้ว

    All u gotta do is get a cutter nd cut that back part out to fit the trigger in

    • @KevinJames-yg9eu
      @KevinJames-yg9eu ปีที่แล้ว +1

      No, that is not all. There is material that has to be removed to insert the front rail, and the front pin hole is no longer pre-drilled. There is no jig with provisions for that hole, and it is centered on the corner of an angled surface, so it's going to need an end mill and fixturing, not simply a drill bit.

    • @ericcartman8716
      @ericcartman8716 ปีที่แล้ว

      Let me guess you wanna put a switch on there too na mean

  • @drvgged
    @drvgged ปีที่แล้ว

    I love it

  • @camarols6712
    @camarols6712 3 หลายเดือนก่อน

    And nothing ever in stock

  • @dojathedon6095
    @dojathedon6095 ปีที่แล้ว

    Can I still get a p80 in cali with no ffl

  • @Adroit1911
    @Adroit1911 ปีที่แล้ว

    The giys at p80 are true Americans thank you for everything y'all do!!! God bless!!!

  • @alexxela1671
    @alexxela1671 ปีที่แล้ว +2

    Hello. How much worse is Polymer 80 in quality and strength than the original Glock frame?
    What is the maximum shot Polymer 80 can be? More than 200.000?
    Sorry, I'm writing through a translator!

    • @HennyManTactics
      @HennyManTactics ปีที่แล้ว +1

      It’s not worse it depends on builder quality

    • @alexxela1671
      @alexxela1671 ปีที่แล้ว

      @@HennyManTactics I'm sorry, it was translated very funny =)
      Did you mean quality depends on the person who makes it?

    • @HennyManTactics
      @HennyManTactics ปีที่แล้ว

      @@alexxela1671 yes

  • @drmachinewerke1
    @drmachinewerke1 6 หลายเดือนก่อน

    The hard part is the long part. And just use a coping saw Go slow
    Use a wood chisel to start with.

  • @93.diesel
    @93.diesel ปีที่แล้ว +1

    Go p80 🎉 ayye I just subbed I was lookin for this video appreciate it all he’s speaking facts nothing but the truth 🖕 ATF

  • @beansNguns
    @beansNguns ปีที่แล้ว

    I just order 9 p80 Glock 19 and 2 g17 p80

  • @sportshighlights5988
    @sportshighlights5988 7 หลายเดือนก่อน +1

    freedom aint free

  • @daryllmroberts7958
    @daryllmroberts7958 4 หลายเดือนก่อน

    as of 3-2024 i was told there totally illegal to build one in ny state,,3 yrs ago yes,,,but no longer,,,gov hochul is a huge gun hater,,

  • @austinevans5387
    @austinevans5387 ปีที่แล้ว +1

    I just got mine... anybody got any good ideas? Maybe save me some time of trial and error

    • @robertfoote3255
      @robertfoote3255 ปีที่แล้ว

      Marine Gun Builder.
      Utube and Rumble

  • @MR.IceCreamMan93
    @MR.IceCreamMan93 ปีที่แล้ว

    Wish they'd send them to Illinois

    • @jondavidmcnabb
      @jondavidmcnabb ปีที่แล้ว

      You have any relatives in Indiana? We in the free state of Indiana can get these....

    • @ericcartman8716
      @ericcartman8716 ปีที่แล้ว

      They do if you have a handgun permit just need to have them sent to a ffl

  • @YourLocalShooter
    @YourLocalShooter ปีที่แล้ว +2

    I hope Polymer80 wins. There lowers are amazing for building glock clones.

  • @johnhawkins4162
    @johnhawkins4162 9 หลายเดือนก่อน +1

    Can’t get them in California anymore. Never will knowing the corrupt government here

    • @tedwright1380
      @tedwright1380 5 หลายเดือนก่อน +1

      Ship them / it to friend / family in a free state. Rebox & ship to your location. More hoops yes but if you want it you will do it. Make friends with a trucker that resides in a free state and travels to your state regularly. Have them buy it and bring it to you.

    • @johnhawkins4162
      @johnhawkins4162 5 หลายเดือนก่อน

      That might work.

  • @GerldoMorales
    @GerldoMorales 2 หลายเดือนก่อน

    Me built one like a a glock 17 and she worck good is like he said is flat 9f people whit skills and special tools to make work rigth and mine come aut good a take time and patience to make work good up to day of today me gat more the 400 rounds on her texti g her and never jam a me good product tanks to tha man

  • @jorgetheyellowgreenbean5908
    @jorgetheyellowgreenbean5908 ปีที่แล้ว +2

    Polymer 65

  • @RobbyPerry-og2ge
    @RobbyPerry-og2ge 7 หลายเดือนก่อน

    This is what pisses me off people feed their family’s creating these company’s for people that refuse to be sheep

  • @camarols6712
    @camarols6712 3 หลายเดือนก่อน

    The bridge frames are junk

  • @why6212
    @why6212 ปีที่แล้ว

    *Compliance80

  • @travishutchings5423
    @travishutchings5423 ปีที่แล้ว +1

    I had orders from their dealer and it was excuses until it was to late. I asked p80 to fix it they told me to pound sand. I am in process of developing my own solutions. I am better off. I been a faithful customer of theirs for awhile and at this point they are not capable of providing products.

    • @blackcatgitch6948
      @blackcatgitch6948 ปีที่แล้ว

      Elaborate please

    • @travishutchings5423
      @travishutchings5423 ปีที่แล้ว

      ​@@blackcatgitch6948On what exactly? My orders were not fulfilled. I decided to develop and design on my own and maybe in about a year or more I might have something developed in house. p80 was a convenience for me not a necessity and when their dealer failed to deliver I decided to go another way with it.

  • @druanubis7194
    @druanubis7194 5 หลายเดือนก่อน

    Bridge frame is nothing more than junk, don't buy!

  • @scarredxshinobi7341
    @scarredxshinobi7341 ปีที่แล้ว +1

    Bring the white color way back

  • @sentineloffreedomforever1381
    @sentineloffreedomforever1381 3 หลายเดือนก่อน

    Felons are intelligent articulate people also, Maybe not all of them but not all law abiding citizens are either

  • @joesashiify
    @joesashiify ปีที่แล้ว +1

    👍🏿👍🏾👍🏽👍🏼👍👍🏻🇺🇸

  • @TheOnlyDonQuixoteDeLaMancha
    @TheOnlyDonQuixoteDeLaMancha 10 หลายเดือนก่อน

    What a guy! Giving credit where it's due.

  • @andreistre7336
    @andreistre7336 10 หลายเดือนก่อน

    absolutely... people who paint gun hobbyists'' with the same brush as criminals dont understand that they are doing themselves a disservice as well. every law some special interest group tries to get on the books is just another way to keep the real reasons for increased crime in the US on the rise. every open carry state ive lived in has been the most polite people in public. the adage,"an armed society is a polite society" is an observable fact. the same people who say support the troops will, in the same breath, denounce everything that most troops hold dear and that all troops swore an oath to uphold. disband the ATF ASAP ... stop trying to get the federal government to intercede in the governing of free states. if you dont like guns' you dont have to buy one ... yeehaw guys love the stuff

  • @user-qx9do9or3x
    @user-qx9do9or3x 14 วันที่ผ่านมา

    Do not buy any of these PA frames from this company. They are garbage that grid in the back is nearly impossible to remove without totally destroying the lower grip module. I watched my brother destroy three of them and he has probably built hundreds of these. The feds put that there so people would screw them up. if anyone has any suggestions that you know work, please let me know so I can tell my brother. I watched him do this for hours being very meticulous but there’s one part of that grid way down in there that you have to use a Dremel and then it melts. Feds are slick on this one guys any pointers would be appreciated and please don’t reply and tell me just go slow because molasses ran faster than my brother.

    • @Bearcotraining
      @Bearcotraining  13 วันที่ผ่านมา

      I am not sure how to work with this specific model but I believe they may have moved past it to a newer update.

  • @VideosBanales
    @VideosBanales ปีที่แล้ว +1

    The ATF got shut down regarding lower receivers. You can buy any receiver now thanks to our hardworking congressman. The ATF cant make laws…