How To Generate Hydrogen from water At Home | How to make Hydrogen Generator
ฝัง
- เผยแพร่เมื่อ 29 ธ.ค. 2020
- How To Generate Hydrogen from water At Home | How to make Hydrogen Generator
In this video I show how to generate hydrogen( hho ) flame using water and electricity . You can make it at home and gain experience.
In fact, we decompose the composition of water, which is hydrogen and oxygen, using electrical energy.
dont forget sub
===============================
Song: MBB - Feel Good (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Feel Good (Vlog ...
=====================
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Fredji - Happy Life (V...
===================
#hydrogen #hho #hhogenerator #waterflame #skillmake - แนวปฏิบัติและการใช้ชีวิต
In this demo, you will get a mixture of H2 and O2. You can't get pure H2. However the mixture will burn when ignited.
Not sure, but wouldn't Hydrogen displace Oxygen at the top of the jar due to the differences in their mass, H being so much lighter than O?
you can get oksigen on anode side and hydrogen on on cathode side if i am not mistaken.
OR.. the glass jar will EXPLODE in your face.
احسنت وفرت علي تعليقا هههه ويمكن ان يحدث انفجار بما أن القنينة تحمل اكسجين وهدروجين قابلان للإحتراق
There's little O2 produced in this reaction. When using table salt (sodium chloride) you get Hydrogen and Chlorine gas. The gases leave the reaction vessel and when bubbled through the second water bottle, the chlorine is dissolved forming Hydrochloric acid. In this application better to use baking soda (sodium bicarbonate) instead of table salt as it produces hydrogen, oxygen and a bit of CO2 which is also soluble in water.
In such an electrolyzer, the output will not be hydrogen, but an explosive mixture of hydrogen and oxygen. In order to get exactly hydrogen, the cathode and anode must be separated by a partition at the level of the water surface and above. And the gases released at the anode and cathode must be collected separately ... It is very strange that these elementary basics are not taken into account in the video ...
the uploader is speechless
Все это как то опасно. Домашние эксперименты к добру не приведут.
Exactly...
Anode and cathode plates should be vertical and chambers should be separated.
Concordo, quando vi este vídeo, pensei exatamente o que você falou!
Thanks for watching 😉
You are not honest with the part of making this hydrogen cell
@@user-hi1ez1go9e yes you said correct.
If hydrogen is present in a test tube, a lighted splint held near its mouth ignites with a squeaky pop. but it is making pop sound so,it is not hydrogen gas. It is oxygen gas
If hydrogen is present in a test tube, a lighted splint held near its mouth ignites with a squeaky pop. but it is not making pop sound so,it is not hydrogen gas. It is oxygen gas
I think it's hydrogen because it's not blue for oxygen.... And I try to make one but it didn't work .... Bubble came up but it's not collecting hydrogen
Why did you NOT show the electric power input????
Class 10th students can relate this😅
Electrolysis 😂
P
Yeah
Its better to use graphite rods from batteries as electrodes as they won't react with electrolyte
Yes, graphite rods are much much more effective in my opinion too. As for the electrolyte, i think sodium hydroxide might be a better salt because the last time i did this, the sodium chloride made chlorine gas which started corroding my wires and my gas got contaminated with some chlorine.
At home, sister
never seen that please make a vidio
I was just about to ask what those cells are made of. But I have plenty of carbon rods instead
charcoal rods should do it to+ u dont need to open a battery
Your work interest to non science students it s very useful to everyone for
Back in 1964, my friends used aluminum foil, draino, (Draino was a granulated acid that was used to clear out sink drains. Since the advent of plastic drain pipe, I haven't seen any draino)
Bact in 1964, Clorox came in brown glass jugs.
We got an empty Clorox bottle or jug. We put water in the bottle, then we put bits of aluminum foil into the bottle, after that we dumped the draino into the bottle, and stretched a balloon over the opening in the clorox bottle.
After a few minutes, the balloon would fill up with hydrogen gas. When the balloon filled up with hydrogen, then we'd tie up the balloon and let it fly
It took a long time for the balloon to fill up with hydrogen. So the smart guy in the group decided to put Clorox instead of water. The brown glass bottle exploded sending broken glass all over the basement.
Lucky no one got cut. The smart guy ( who was an A student, said the bottle didn't explode, but instead it imploded, and he explained the difference to use C student.
It was just one of many of my childhood memories.
Draino/NaOH is an alkali, not an acid - I know science... It also contains small bits of aluminum to generate hydrogen
i did the same mistake when i was kid
caustic soda + water + aluminium foil in empty sauce bottle and bottle shatterd in pieces fortunately the bottle had sticker so glass dont fly all around
learned hard way
@@user-ur5yg3cx8t Yes, this was a group effort. We were about 13 years old. The old clorox bottle were medium thick glass and brown in color. It was a gallon. So we were lucky not to get hurt
as already noted, Draino is an alkali, not an acid
@@nancymatro8029 but it did the job.
Amigo, lo felicito, un experimento muy interesante e ingenioso, siga adelante y gracias por compartir sus conocimientos!!!.... 👍👍
Si hay hidrógeno presente en un tubo de ensayo, una férula encendida que se sostiene cerca de su boca se enciende con un estallido chirriante. pero no está haciendo un sonido pop, así que no es gas de hidrógeno. es gas oxigeno
The output of this generator is HHO, otherwise known as Brown's Gas. It has very interesting properties and is worth experimenting with. However, the gas is extremely reactive and the slightest spark can cause a powerful explosion. Keep it small scale and ensure you have a bubbler to prevent a spark or flame from travelling backwards in the tube and entering the generator.
did it when i was 15. filled the gas mixture into glass bottles, then fired it. it was fun.
He used salt, which means it will also contain chlorine gas, also reactive.
I am just about to ask where did the oxygen go because I know oxygen is the other part in water. The title of the video can easily make one think it is only hydrogen. I didn't see anything about the oxygen in the video. Or maybe I missed it.
@@IshaqIbrahim3 Yeah it produces HHO or browns gas, a very explosive mixture, as he adds salt, it also creates chlorine in that mix, making it even more reactive.
@@engjds I guess the next step will be to separate the gasses into different containers.
I am now imagining ideas on how to separate the gasses. 🤣🤣🤣🤣
You're actually obtaining a misture of hydrogen and oxygen gases (and some chlorine gas since you have used table salt instead sodium hydroxide). But, nice shot!
পরিচ্ছন্ন বর্ণনা। ধন্যবাদ
تاریخ تولید و انقضا رو نمیدیدم باور نمیکردم XD
keep it up brother...
If you want to keep clean everything after the electrolyte comsum,ption use pure water (or distiled) and baking soda instead of ordinary salt. Salt is sodium and chloride and if you separate them you will have a lot of chloride in your solution. You can use caustic soda too.
Cl- gets electrolized and then attacks electrodes.
@@west_park7993 almost everything in it does it, oxygen too.
Чтобы получить чистую смесь кислорода и водорода, в воду ничего не надо добавлять. Если добавить соль (NaCl), то при электролизе начнет выделятся хлор. На 7:54 видно, что в банке цвет газа стал грязно-зеленым. Вот это и есть хлор - ядовитый газ, который применялся в 1-й мировой войне в качестве боевого отравляющего вещества.
a translation of this comment i used from google translate for people who cannot understand Russian:
To get a pure mixture of oxygen and hydrogen, nothing needs to be added to the water. If salt (NaCl) is added, then chlorine will be released during electrolysis. At 7:54, you can see that the color of the gas in the can turned dirty green. This is chlorine - a poisonous gas that was used in the 1st World War as a chemical warfare agent.
ঠিক বলেছেন
А если добавить нашатырный спирт?
@@MikeSokoloff зачем? Что он даст? NH4OH - при электролизе на выходе получим водород и аммиак.
@@user-zb9kt6zr9k думал увеличит выход водорода, но посмотрев на формулу, и прочитав про аммиак, понял, что это ошибка.
Zulia Venezuela, buen día, no adicione sal (NaCl) porque se desprende CL2 gas tóxico y es incómodo, adicione Soda Cáustica (NaOH) se desprende H2 gas y O2 gas, me gustó el video, gracias
KOH...
Perdonen pero es correcto utilizar hidróxido de sodio (NaOH) y no cloruro d sodio (NaCl, sal d cocina) Gracias xla corrección
Good job. 💪👍👍
Fascinating, if you've got a home supply of IV tubing and a load of razor blades. I didn't know razor blades were still being made. And I've never seen a salt water generator.
The ocean must be a joke to you.
ایول داداش دمت گرم بالاخره یک ایرانی هم تو یویتوب پیدا شد از این آزمایشات جالب انجام بده:)
You can also use 20 kHz to split water which would use less energy.
Muy bueno, 👍
Excelent, I Will do. Thank you very much
عالی دستت دردنکنه واقعا"ازاختراعاتت خیلی راضیام،قلبمی ٪٪٪٪٪٪👍👍👍💙💙💙💐💐💐
This is good for us to get the science idea.
next up: how to make a hydrogen fueled rocket engine at home
Wow very interesting work!
Thank you!
It takes more energy to separate the hydrogen from water than you get from bur ing the hydrogen . It also takes rare catalyst metals to make it actually yield anything g that would propell a passe ger vehicle.
Instructions unclear, the house exploded and now my family is at the hospital
I got flung towards the sky and still going up, send help
What amounts are required to run a vehicle ?, even one of those small engines which fit on a desktop ?.
That's so nice and very easy. I like it.
Nice
I like your project I want to be make like this👍👍👍👍❤
Wow amazing 👍👍👍💜
Esas barras es de plástico donde esta la nabajas o Está pegado?
Hola
Time to prank my friend by igniting his home!!
Give him some balloons filled with 90% hydrogen
This is a very dangerous experiment, due to the fact that the electrolysis liberates both oxygen and hydrogen. It is amazing that the whole thing didn't explode. Using glass is a very bad idea if it explodes as there could be broken glass flying everywhere at super-sonic speeds. I imagine the 'water filter' is absorbing some of the unwanted oxygen. However, if this is so, it will eventually saturate and will not be able to absorb any more oxygen, so a perfect mixture of H and O will be coming out of the nozzle !!! Lighting it with a flame could cause a backfire that goes all the way back to the main chamber!
It's not dangerous at all. The iron in stainless steel is readily oxidised compared to the hydroxide according to electrode potential values. That's why you see the green precipitate. It's iron (ll) hydroxide.
Oxygen will only be released if we use inert electrodes. So no one should worry about creating an explosive gas mixture inside a glass
@@themichaelson Well... that makes me feel a little better. My field is electronics, not chemistry. However, are you saying that 100% of the liberated oxygen will go into making rust? I'm still nervous about it.
@@markr7059 you can try the experiment with a steel anode and put a test tube over the anode and see whether bubbles of oxygen are produced at the anode.
See for yourself first hand✋
@@markr7059 No, that's not the case. The electrons that were supposed to be released by hydroxide ions to form oxygen will be instead released by the iron.
Doubt this could develop enough energy to explode but who knows. I've been wrong before.
Nice ,if you write down the assumed chemical reaction taking place,it would be great and more helpful 👍
It's called electrolysis, but putting current through salt water creates lye and gives of chlorine gas
This is simple electrolysis. The electric charge causes the oxygen atom in the water to pick up a free electron, thus changing its polarity to match that of the hydrogen atoms. As same polarities repels, the hydrogen atoms disassociate from the oxygen atom and the result is expressed as a gas containing 2 parts hydrogen (H1) and one part Oxygen (ozone). The gas is corrosive and ozone can burn your lungs so avoid breathing the gas. When combusted, the gas becomes water again.
Thank you very much very easy to make
The electrolysis of water makes both hydrogen and oxygen gas in the most flammable, 2:1 stoichiometric ratio. Therefore I am surprised that the gas does not burn better
Very nice idea🙏♥️
Thank you! Cheers!
Im proud iranian geniuses are finally being showed
You are getting hydrogen (H2) , chlorine (Cl2) mixed in the gas, and salt and NaHO in the solution.
You get chlorine and sodium hydroxide only if you're using inert anode. Here the anode is steel which is more readily oxidised than the chloride ions (check electrode potential values) hence the green precipitate of iron (ll) hydroxide.
That is why in the manufacturing of chlorine they use titanium coated in platinum because platinum is less readily oxidised compared to chloride ions.
NaHO?? NaOH!
சூப்பர் தல
సూపర్ బ్రో
thanks! this really helped me make a thermonuclear bomb to show whos boss.
Nice experiment, but had given the commentary instead of music it would have been better & shorter.
Very nice 👌 👍 👏
Thank you! Cheers!
Add food salt or drain cleaner to mix. It will be faster
Вместо соли нужно добавлять щёлочь, иначе ещё и хлор будет выделяться, а лезвий хватит на пару дней
это правильно? знаете ли вы свойства водорода. Если в пробирке находится водород, зажженная лучина, поднесенная к ее рту, воспламеняется с писклявым хлопком. но это не попсовый звук, так что это не гидр
@@timsfirangitadkha8871 пишите на родном языке, иначе смысла нет в написанном
If hydrogen is present in a test tube, a lighted splint held near its mouth ignites with a squeaky pop. but it is not making pop sound so,it is not hydrogen gas. It is oxygen gas
From where the hell chlorine will come?
@@TechMobileReal table salt is NaCl
Well this is an experiment to generate H2 . Experiments are also happening to run the Auto industry on Hydrogen as well. Hope that day comes earlier. So as to avoid Petrol, Diesel, Lpg, Lng, Vlsfo, Lsmgo and Kerosene.
Don't worry I will do it for you ☺️
And lithium
How much potential can be stored in H2O? Or better yet the earth, atmosphere, natural existing nature?
Very dangerous experiment and should put a warning in the video.
He encountered no accident solely due to good luck !
When I was a student I made the hydrogen gas simply by putting zinc, the outer most metallic layer of an old battery, into a glass bottle filled with 50% of hydrochloric acid. When I though the hydrogen gas is enough for burning I ignited it with a match. . . then explosion occurred.
Later, I discussed with my classmate and we concluded that due to the hydrogen in the bottle did not totally displayed the original air but mixed with it in a certain proportion and made it an explosive mixture of gases. Secondly, the jet for burning the hydrogen gas was not small enough to push the gas going out in a higher velocity and the fire sucked back into the the bottle and ignited the hydrogen-oxygen mixture inside. Thus a terrible explosion occurred.
In this experiment, it is lucky that he used the very small needle-tip jet and thus avoided the explosion. I think nobody will be alert without my experience !
No flash back arrest stupid
Thanks.
Man U are using totally wrong source of materials and setup. Use 316 stainless steel and U can use copper only on the positive side to stay clean, or just use 316 stainless steel, then U need thick PVC health boards . And U need to have 2.3 volts to each plate and it adds up to just over 12 volts U are working with. U need to make it so it has its own world of magnetic fields and double it's magnetic frequency and zero both, to produce clean and outrageous amounts of hydrogen. As long as it makes more then U need into your intake or vacuum. U will be fine. But if U need even more U can do say eight into one ECT and hook up how many U want. And with the added high temp fuel, U will need titanium valves and copper spark plugs. And then a tune at dyno place to tell your computer it's starving for fuel, that way the fuel cell hydrogen goes in at a certain amount made before it enters chambers of piston. And the gapping of spark plug, will be done right at dyno place. The more hydrogen U produce doesn't matter as long as it's more then U need. And when U play with hydrogen fuel cells, U have to have two one way valves, two flash back arrest and a bubbler , to clean hydrogen and it's a dry clean and a safety device, just incase it ever back flashes to the bubblers and not your fuel cell my friend.
U should start with something simple like electro farming, look it up on U tube, even they don't know much about that subject
Electrical culture magnetic farming my friend.u want massive growth of vegetables from either
awesome👍
Very nice
Really superb bro
Very fantastic 😯😯😯😯🇮🇳🇮🇳🇮🇳🇮🇳👌👌👌
Beautiful. Very beautiful
Thank you so much 😊
In the begging I thought it was a tutorial about how to be more efficient while being depressed xD
What are the materials you used..?
As far as I can see you're generating hydrogen plus oxygen. Cheers
Does the water bottle have to be big or is it enough if it is small?
Try to separate both gas oxygen is heavy weight & Hydrogen is Lighter
It is not a reaction type that produce hydrogen from water but metal reacts with alkali to produce hydrogen. Remember that it is not possible to have more out put than inputs
Metals and alkalis don't react. And he's not producing more outputs than inputs. Remember he is using electrical energy to produce hydrogen from water
There is no alkali in our electrolyte to react with any metal plus metals react with *acids* to form hydrogen not with alkalis
You couldn't be further from the truth. He is decomposing water using electricity. Where do you see getting more energy than was put in?? There was no alkaline solution. It was regular sodium chloride. It is used to increase conductivity. Pure water is not a good conductor.
@@themichaelson aluminum and sodium hydroxide (a strong alkali) react vigorously. But in this video it's the electricity driving the reaction.
How should the installation be done so that it can be used as fuel for the heat power plants instead of gas?
It would be very good and, above all, economical, if you could heat yourself in the winter with water instead of gas.
It it possible maybe you will make a video with this information.
Instead of wasting electricity trying to convert water into fuel which is then used to hear things up, you can just use electricity to directly heat stuff using a coil or something
Saves us a lot of time.
To write 100 times on your blackboard: “hydrogen is an energy carrier, not a source”. 😂😂😂
You have to stock energy: ok
You have to carry energy: ok
You don’t produce H2 with electric energy to burn it a second later.
There is a concept of fuel that can generate H2 when you pour water on it
Yeah, I was here just to look for the conventional comments: "this can change the world" 🤣🤣🤣🤣
@@ken_kastle69 if the electricity consumption is higher and more expensive than producing hydrogen with it to produce heat, then it is better to go for hydrogen production with the help of electricity. And i think this needs to be investigated to see what is more effective.
Awesome man.
Im Glas sammeln sich H² UND O².
Nennt sich Knallgas. Warum? Weil es eben einen KNALL macht,und die ganzen Glassplitter inklusive der Rasierklingen fliegen dann um die Ohren durch die Luefte😁😛⚠️💥💥💫🗯️💣💣
Viel Glueck damit!
Tesekkürler
باورم نمیشه که ایرانی هستید واقعا افتخار میکنم ❤
ممنون 😁
Excellent videos
Thank you very much!
My first introduction to electrolysis was in prison in Texas. The inmates use to break down shaving razors and cut soda cans into strips and make a contraption that could be plugged into the wall via the soda can strips, which would be connected to the razor blades that were spaced and stacked in a way where electricity would travel through water in order to heat the water up for coffee or to cook Ramen noodles with. The electrical insulation was made from plastic thread that was stripped from property bags that were made from this plastic thread.
මාර පකේ හුත්තෙක්👍❤
It was a amazing idea
At 8:00 one can see the discolouration of the water by having used wires with copper cores (even though he so carefully used stainless steel blades for the terminals). It happens quite quickly, and after a few hours of use, you can really throw the machine away. It seems one starts to reproduce the "primeval ooze" from which life began!!
Better buy one with platinum terminals for long use and easy cleaning.
I used it in my minor project years ago
Can u put all the things we need to make it?
very anosome🎉
Bro can you tell me the name of all the materials that are used in this video.
Wow very nice 👍
Thank you! Cheers!
тот самый случай про кота, которому нечем заняться
is it deuterium or protium i am working on a fusion reactor project
It will mixed with oxygen means H+O
Amazing
what is the purple and yellow cable one?
what a dengerous things for home, 220v ac in use ...
I ran it for a long time and when I returned the blades connected to the positive end were vanished
yes exactly
U need bigger everything
It's cuz the're not inert. Use pencil lead from those EGD pencils. They'rent 100% graphite because they have clay and other stuff in them. But they won't dissolve completely
Can you make the levitating bulb lamp which is based on the principle of electromagnetic induction?
After burned it should create water??
I was made this 5 years ago for a science fair 😌❤️🇧🇩
Tres bien
Cool 👍👍
That's a good idea, let's build an airship.
Hold on, let me go grab my medical supplies from my bathroom…
This scares me quite a lot. Not only do you have a perfectly stoichiometric explosive mixture, you add electricity, flames, glass, and razor blades 😂 into the mix. There will also be a small quantity of chlorine gas generated due to the salt in the water.
Yes, it works, but there really is a huge amount that can go wrong with this.
I'd strongly suggest not doing this. If you were going to, use plastic containers (preferably behind some kind of flameproof screen) and something other than razor blades. But seriously, if that flame travels back through that needle then that plastic bottle is going bang, so keep that second bottle almost full so the quantity present is as small as possible.
Make sure the internal diameter of the needle is less than 0.5mm too (hydrogen has a quenching gap of 0.64mm).
Secretly Used NaOH instead of Nacl 😁😁 i Done this project when i was in 10th
awesome idea
Thank you! Cheers!
Well, what is the idea of project, I mean, can you explain why you used these tools and how they produced oxygen for us, please!
So lemme explain
Basically the dranex is a realy strong base and the Razer blades are made of aluminium when these two things react they give of dihydrogen and normal oxygen which can be used to make the welder showed in the video
Great job bro🤩
I liked it but I want made a video using a partition between anode and cathod and use castic soda (sodium hydroxide) instead of salt.
goood
Muy buena la presentación
Creo que conseguirías más hidrógeno y oxígeno si juntas las cuchillas de afeitar
"Creo que conseguirías más hidrógeno y oxígeno si juntas las cuchillas de afeitar".... siempre y cuando no hagan contacto entre sí, pues tendrías un corto circuito.
Mantap bang
Thanks!
This overly happy sound will one day kill me after suffering a very painful way of accoustic brainwash. I will resist!