Nice machine! My son bought a Massimo TBOSS 500 2 years ago, no problems with it. I have a CFMOTO UFORCE 800 another great brand that is cheaper than the so-called big big brands. New Subscriber
i have the hisun axis 500 utv...got it from lowes ...it is an awesome machine...after the break in i was able to get it to 46 mph...low gear is great..i like the rear is always posi..on the fly 4 wheel dr...front diff lock...i have the same safety seatbelt ...sounds exactly like my 500...and have climbed a 45 degree angle in low gear 4x4..they are fun.
They are great for the price, take care of them and they will last! Thanks for the feed back, glad others are having good things to say about them as well.
I have the Hisun 500. Love it. To bypass the seat belt safety feature just hook up the seatbelt behind you, and leave it that way if you aren't gunna use them.
Just bought a 2022 700. Keeping my fingers crossed. Had a quick connect wire loose and wasn't charging from the get go. Once plugged back in, no warning light and charging at 14+ volts.
A couple of comments. 1) The auxiliary switch in down position powers two gray connectors. One is by the front passenger light under the wheel well. The other is under the bed on the drivers side behind the rear shock. The key has to be on and the lights to power those connectors. It is fuse protected. 2) There is a black connector near the gray connector in the back which I believe works off of the auxiliary switch when it's in the up position. But I do not know what the circumstances are for it to get power. 3) You can disable the seat belt switch by disconnecting the sensor. The connector is behind the drivers seat. With the bed up. 4) I think the bed tilts for accessing the motor not for dumping loads. 5) I added a screen to the exhaust side of the cooling fan to keep mice out. If you look behind the passenger seat, with the bed up, you'll see a black plastic cover on that side of the engine where the output blows on the CAT to divert heat.
I have a hisun 500 Victor I have owned since brand new bought it at Rual King Farmington mo I have it since 2017 and no problems yet I only have 75 hrs on it but I have been long runs and steep hills for the money and the deal I got was really worth it
I just bought a 2024 BADBOY 750 which is the same machine. The BADBOY has the largest tires I've seen on a UTV. So far I am very happy with it. I have it fully road legal as I will use it to run between the farms. Only complaint is it is a little loud. Any tips on how to get it quieter without voiding the warranty? Also does anyone know where I can get the male plug ends for those aux plugs. Would be great to power my sprayer.
@@JoelMahlman I have since sold mine, but I will say that some sound dampening pads from auto zone under the bed and cab help a good amount. Best of luck!
@@freedomfilledlife sold it a year ago to a buddy. He still has it and still running great. Had only a couple small issues. The steering arm bolt came loose and the dash instrument panel wire came loose. Both minor issues. Been running great for him so far.
It’s been great, I have sold it a few months ago but when I sold it I still had no problems. I hated the fact it was Chinese made but it was good for the price.
@@grandnattygarage7355, Thank you for the reply. Our Lowe's don't have the 700 just the 500 . Guess that's what I will have to get . Kind of flat land around here so no really big hills. Hope it be OK.
@@flench1901 no problem, you should be fine with a 500. Zillow depends on what your wanting to do with it. The 550 does just fine with pulling things and going up decent inclines and hills. So for flat land the 500 should be good. Best of luck!
I do not, I have since sold it, but I had it for a couple years and it was running great when I sold it. I actually sold it to a Buddy and he says it’s still running great
I promise that mule is way smoother and way better built. The u joints and steering rack are complete crap in the hisun. The engine doesn't have much power and is not very smooth. Plus it rides like a chuck wagon. I have a customer with that hisun and I dislike it a lot.
@@grandnattygarage7355 Ocala! My son and his wife lived in Orlando for his work and we backpacked Ocala National Forest. Beautiful area! I hope your Hisun gives you years of great service!
Yup, it stiffened it up but it was still manageable. I remind myself I’m not in a Cadillac , I’m in the woods on flat land 🤣 but for the most part it truly wasn’t much worse.
Could be the linkage or it could be the shift lever that’s attached to the brake peddle. If it’s not pushed down hard enough it won’t engage. Check to make sure it’s in place
Got a 500 from Lowes in May. The door rubber closer are junk they broke in the first 2 weeks. The digital dash is junk. the miles are not right , gas gauge isn't very accurate ,Its very noisy and the worse part is a authorized service center is over 100 miles and service is very slow the closest service center lost their mechanic so it no longer services these. Another thing in the first 50 mile it has used a quart of oil. It smokes pretty good when I start it in the mornings. Would I recommend it . NOOOOO
Measure your tires bet they ain't 26 " more like 24 First you.ll need new door latches Than switch for auto fan ! Wind sheild will crack And you need two flat bars for roof or it will be gone !!
Thanks for the feed back! I’ll keep an eye out on it. Had it a little over 1 year and haven’t had any issue yet, but I’ll be sure to update if anything major like that happens!
This unit is a pile of junk mass produced by China and assembled somewhere in Texas. Ignore the turn signals winch etc etc That don’t come with Polaris can am etc etc. by the time you put a couple hundred hours on this thing that’s all you will have left that actually works my brother bought this exact unit you see here and it is the weakest cheapest unit I have ever seen i my life busted belts alignment way out from the get go, cheap tires, unexplained engine malfunctions all the time
Well, don’t hold back, tell me how you really feel 🤣 I do agree with you, though it is mass produced Chinese material. I have since sold it but when I sold it, I had no issues with it. I also have a Polaris 850 sportsman.
@@grandnattygarage7355 I just gave feed back on what this unit is and it is over priced, way way underpowered, and not dependable like your review says. This unit should have never been marketed with the lack of power issue alone. My brother is devastated over all this. The service guy he bought it from has no idea what he is doing either. It is back in the shop right now with a busted belt and major oil leak. It is nothing but cheap Chinese JUNK
Nice machine! My son bought a Massimo TBOSS 500 2 years ago, no problems with it. I have a CFMOTO UFORCE 800 another great brand that is cheaper than the so-called big big brands. New Subscriber
Awesome, thanks for the sub!
Thank for the vid ! I have 2018 version . Simple unplug harness under the bed behind drivers seat to stop the seatbelt chime 👍
Awesome, thanks for the info!
i have the hisun axis 500 utv...got it from lowes ...it is an awesome machine...after the break in i was able to get it to 46 mph...low gear is great..i like the rear is always posi..on the fly 4 wheel dr...front diff lock...i have the same safety seatbelt ...sounds exactly like my 500...and have climbed a 45 degree angle in low gear 4x4..they are fun.
They are great for the price, take care of them and they will last! Thanks for the feed back, glad others are having good things to say about them as well.
I have the Hisun 500. Love it. To bypass the seat belt safety feature just hook up the seatbelt behind you, and leave it that way if you aren't gunna use them.
Ya that’s true, lol
Just bought a 750 the other day. So far we love it
Picked up 550 hisun outfitter colman love it awsome machine .
Awesome, enjoy it! For the price you can’t beat it.
Got a 550 colman check your vaulves
Just bought a 2022 700. Keeping my fingers crossed. Had a quick connect wire loose and wasn't charging from the get go. Once plugged back in, no warning light and charging at 14+ volts.
A couple of comments.
1) The auxiliary switch in down position powers two gray connectors. One is by the front passenger light under the wheel well. The other is under the bed on the drivers side behind the rear shock.
The key has to be on and the lights to power those connectors. It is fuse protected.
2) There is a black connector near the gray connector in the back which I believe works off of the auxiliary switch when it's in the up position. But I do not know what the circumstances are for it to get power.
3) You can disable the seat belt switch by disconnecting the sensor. The connector is behind the drivers seat. With the bed up.
4) I think the bed tilts for accessing the motor not for dumping loads.
5) I added a screen to the exhaust side of the cooling fan to keep mice out. If you look behind the passenger seat, with the bed up, you'll see a black plastic cover on that side of the engine where the output blows on the CAT to divert heat.
Hey thanks for the info! Ya I didn’t know some of those things, I appreciate it!
I agree with you, i don't like over kill just good enough.
Absolutely!
I have a hisun 500 Victor I have owned since brand new bought it at Rual King Farmington mo I have it since 2017 and no problems yet I only have 75 hrs on it but I have been long runs and steep hills for the money and the deal I got was really worth it
I just bought a 2024 BADBOY 750 which is the same machine. The BADBOY has the largest tires I've seen on a UTV. So far I am very happy with it. I have it fully road legal as I will use it to run between the farms. Only complaint is it is a little loud. Any tips on how to get it quieter without voiding the warranty? Also does anyone know where I can get the male plug ends for those aux plugs. Would be great to power my sprayer.
@@JoelMahlman I have since sold mine, but I will say that some sound dampening pads from auto zone under the bed and cab help a good amount. Best of luck!
@@grandnattygarage7355 Thanks for the reply but I was referring to the exhaust noise. I may just have to get used to it. It is not as loud as some.
I just got my Hisun 750 yesterday ❤
Congratulations!! Hope you enjoy it.
Hey… 3 years later. Still have it - running well?
@@freedomfilledlife sold it a year ago to a buddy. He still has it and still running great. Had only a couple small issues. The steering arm bolt came loose and the dash instrument panel wire came loose. Both minor issues. Been running great for him so far.
My axis 500 didn’t make a hundred miles before a major break down
Thinking of getting the 700. How has yours held up since this video?
It’s been great, I have sold it a few months ago but when I sold it I still had no problems. I hated the fact it was Chinese made but it was good for the price.
Bought the hisun Coleman version of it , hopefully it will last.
It’s been amazing so far. Runs like a champ, I think you’ll be satisfied!
Hi I was thinking about buying one and I was wondering if you still haven't and how is everything going with it
Fixing to buy one . Does the 4x4 seem to work OK? Does it Bang when in gauge in 4x4 ?
Works great, no noise or issues. There is a very small clank sound but that’s it. It can be engaged either at a stop or on the fly while move.
@@grandnattygarage7355, Thank you for the reply. Our Lowe's don't have the 700 just the 500 . Guess that's what I will have to get . Kind of flat land around here so no really big hills. Hope it be OK.
@@flench1901 no problem, you should be fine with a 500. Zillow depends on what your wanting to do with it. The 550 does just fine with pulling things and going up decent inclines and hills. So for flat land the 500 should be good. Best of luck!
Thought about getting one but who will service it for me if it breaks. I can do basic stuff but I’m no mechanic.
If you get it from rural king, they will service it for you
Just picked up a 2018 vector 750. Tilt lever is gone is there a way to lock tilt in?
Honestly I’m not sure. You might be better off just ordering the part to fix it.
Still got it? How's it going
I do not, I have since sold it, but I had it for a couple years and it was running great when I sold it. I actually sold it to a Buddy and he says it’s still running great
That machine is strangely similar to my $15k Kawasaki Mule MX Pro. Sure sounds exactly like it.
Thanks for watching!
I promise that mule is way smoother and way better built. The u joints and steering rack are complete crap in the hisun. The engine doesn't have much power and is not very smooth. Plus it rides like a chuck wagon.
I have a customer with that hisun and I dislike it a lot.
Where did you find that for under 8K?
Rural king Ocala Florida. Was $7,800 but of course not including the tax.
@@grandnattygarage7355 Ocala! My son and his wife lived in Orlando for his work and we backpacked Ocala National Forest. Beautiful area! I hope your Hisun gives you years of great service!
when you compressed those springs you stiffened already too stiff suspension.
Yup, it stiffened it up but it was still manageable. I remind myself I’m not in a Cadillac , I’m in the woods on flat land 🤣 but for the most part it truly wasn’t much worse.
i got a axis 500,one thing .it stop going into reverse . do you think it could be the linkage? it only has 2 hours on it
Could be the linkage or it could be the shift lever that’s attached to the brake peddle. If it’s not pushed down hard enough it won’t engage. Check to make sure it’s in place
@@grandnattygarage7355 that was it ,the spring came off.thanks for the help
With your shocks that tight it will ride ruff
No it had no issues with stiffness, it still had travel to allow cushion
Got a 500 from Lowes in May. The door rubber closer are junk they broke in the first 2 weeks. The digital dash is junk. the miles are not right , gas gauge isn't very accurate ,Its very noisy and the worse part is a authorized service center is over 100 miles and service is very slow the closest service center lost their mechanic so it no longer services these. Another thing in the first 50 mile it has used a quart of oil. It smokes pretty good when I start it in the mornings. Would I recommend it . NOOOOO
Thanks for the info
52323 where is the oil stick on a 550 hisun
Looks like Florida all day
Yes sir lol
Looks like Ocala
@@summerspi1 your close lol, about an hour off!
@@summerspi1 born and raised Ocala. Just bought the 750 from home depot and living in Vermont. It is a great machine.
Were you able to be tax exempt when you bought it
Nope, should I have been.? Lol
How fast does it go?
I got it to 46 mph on flat level ground.
Measure your tires bet they ain't 26 " more like 24 First you.ll need new door latches Than switch for auto fan ! Wind sheild will crack And you need two flat bars for roof or it will be gone !!
Thanks for the feed back! I’ll keep an eye out on it. Had it a little over 1 year and haven’t had any issue yet, but I’ll be sure to update if anything major like that happens!
i wish i had this in the 90's. Id have so many kids right now.
Hey man, never too late. Get yourself one!
@@grandnattygarage7355 Good Advise. I got a 22 550 tboss. works good.
@@TheAtroShow good deal! Put it to work!
Dizzzzzaayyyy
All made by the same people, hisun, Benche, , Coleman, Massimo and anything sold at the box stores.
I put an exhaust silencer on mine and it really helped with the loudness.
th-cam.com/video/r5ebn5lHB3E/w-d-xo.html
👀
This unit is a pile of junk mass produced by China and assembled somewhere in Texas. Ignore the turn signals winch etc etc That don’t come with Polaris can am etc etc. by the time you put a couple hundred hours on this thing that’s all you will have left that actually works my brother bought this exact unit you see here and it is the weakest cheapest unit I have ever seen i my life busted belts alignment way out from the get go, cheap tires, unexplained engine malfunctions all the time
Well, don’t hold back, tell me how you really feel 🤣 I do agree with you, though it is mass produced Chinese material. I have since sold it but when I sold it, I had no issues with it. I also have a Polaris 850 sportsman.
@@grandnattygarage7355 I just gave feed back on what this unit is and it is over priced, way way underpowered, and not dependable like your review says. This unit should have never been marketed with the lack of power issue alone. My brother is devastated over all this. The service guy he bought it from has no idea what he is doing either. It is back in the shop right now with a busted belt and major oil leak. It is nothing but cheap Chinese JUNK
I agree they are just a piece of crap
Get 3000 more dollars and get a better machine dude you will be working on this piece of shit daily
@@OmEgA766 had it for years with no issues, but I did however sell it