Very labor intensive. Levels of dexterity I'm not likely to achieve very soon. Thanks for showing the breakdown. Getting a better grasp on the engineering and how many connections could be damaged in a crash
Need the right screwdriver set and I file the tip off just a tad so they fit better. That screwdriver they give you is for the props with Philips head screws. 😂
QC GUY I just bought six different small Phillips head screw drivers hoping one will work. I don’t have anything to file the tip down. But that is exactly the problem o am having. The tips are too long
Thanks for the video. Had my first crash today and everything is fine except the yaw motor doesn't work so the video shakes rendering taking video useless and therefore the zino useless. I was hoping that a ribbon came loose and when I put it back together it will be fine again. It isn't. I don't know if I should buy a replacement camera or get another zino and keep this one for spare parts.
mavros777 dude I literally had same thing happen on the same day 😂. I was thinking about taking it apart I haven’t gone that far and maybe a ribbon cane loose but I’m debating the same thing if I need to just buy a new one and keep old or try to repair this thing
update: I ended up taking it apart to check connections and stuff and it all looked good and got it back on and same thing, just shaky footage, still recording and good quality just ever so slightly shaky. enough to make it annoying and not even worth it. if anyone figures this how or husband releases the "tool" to put a new camera in let me know.
@ yes I would think that would help. unfortunately mine didn't help because I had a shaky gimbal and no error code but with the error code it may fix it!
I have seen your videos, and tried it out, but I have stille a steady red light. The only thing left, is the gimbal. I pretty sure it's the problem. Where can I buy a new. Thanks for you easy learning videos Best regards Joachim
Joachim Pedersen If you google it you will find plenty of sources. I don’t know your supplier preference or location so it’s best you research and choose. It’s most likely your camera cable though. 👍
Those screws are so tiny. I don't have a proper screwdriver for them, because I broke the flex moving the drone up and down. You better unplug that flex and remove de entire module.
Hi, thank you for a fantastic video. I've just replaced my gimbal with a brand new one following your video, and when I turn the drone on, the gimbal goes crazy, flapping and flailing in every direction. It occasionally stops, but then starts again. I have double checked and triple checked the connections, they are all tight; the tops of the ribbon cable connectors where they connect to the drone (on the hubsan zino pro) were bare metal, so I put the foam pads on top of them which were in place on the outgoing gimbal' connectors. Do you know what might be causing this? It seems almost definitely a connection issue. The camera works fine, so could it be the motor ribbon cable? I barely touched it during fitting and it's a brand new gimbal, how likely is it that a ribbon cable is faulty? Thanks so much for any advice you can offer.
That’s normal when you replace with a different one. It needs to be calibrated with the calibration cover and software. I have a video on doing this calibration as well… You do that and you will be fine 👍🏻
@@noodleet no worries.., Once you start the first click of the process it will stop. Note, if it time’s out just keep trying. This will definitely get you you in shape. 👍🏻
Motor plus long screw is front and motor plus short screw is rear. I am loading a video right now on how to replace motors and esc's. You should replace motors and esc's at the same time because it takes time and often people think the motor is bad and it is really the esc that is bad. Replace both!
After an accident my ZINO broke down and I assumed it was the Gimbal. I have bought one and installed it according to this excellent tutorial: HOW TO REPLACE CAMERA & 3 AXIS GIMBAL However, after changing it and introducing new firmware, the gimbal jerks when restarting the drone, it becomes inert and I get a message "the gimbal is protected. Check that it is not stuck". What I can do?
Simple fix... New gimbals aren’t plug n play. You need to follow this next video and you will be set. Keep me posted 👍🏻 th-cam.com/video/Apv7-s6Ftds/w-d-xo.html
@@QCGUY Great your immediate response that I greatly appreciate. Tonight I'm going to do what you suggest but it seems to me that it will be the solution Thanks thanks...
@@QCGUY I've seen your video. Excellent But ... now I have to look for the GIMBAL COVER TOOL I just ordered it from China and it will take me a few days. Thanks again
Hello QC guy, I'm receiving error 0x0080 can't initialize the Gimbal, I noticed that when turn on the Gimbal doesn't do the initial testing it just shakes a little bit, it is not stuck or anything like that. Have you ever had this error before? Thanks for your help
For that you need the gimbal tool and calibration software for that tool in most every case. I have a video on it and how to do it in my list of videos.
@@QCGUY so technically I could still put the new camera in and it would work? or do I need to wait for the tool? if you can help before husband slowly decides to roll the tool out let me know. ill buy parts and pay for labor of course.
Chad R I recently helped a guy do it and it was a disaster! I have done it by loading the very early firmware onto the quad to get it to recognize it and then could update it with the latest and those quads are still flying today but in this last case it would not recognize the camera and all I can think of is newer firmware won’t allow my method. It’s best to wait the wait but keep bugging them at the same time for this part and tool. It’s ridiculous!!!!
QC GUY thanks for the fast response brother. The video was on point and it was easy to take the camera out and look it over but I believe it must be a ribbon that is internal that is the problem. I have made 3 inquires to hubsan and I’ve replied to them all and also emailed Sam lee and absolutely no response at all yet. The first inquiry was over a month ago, now the gimbal issue. This is why I should stick with dji products, their service is top notch and I got my fly away spark back in a couple weeks...thanks for all the great videos either way
Estupendo tutorial!!👏👏 Necesito reparar o sustituir el gimbal camara de mi dron Zino. Podría decirme donde comprar el cable de conexión del gimbal o la propia cámara con gimbal? No encuentro estas piezas de recambio. Muchas gracias. Great tutorial !! 👏👏 I need to repair or replace the gimbal camera of my drone Zino. Could you tell me where to buy the gimbal connection cable or the camera with gimbal itself? I can't find these spare parts. Thank you
Great tutorial !! 👏👏 I need to repair or replace the gimbal camera of my drone Zino. Could you tell me where to buy the gimbal connection cable or the camera with gimbal itself? I can't find these spare parts. Thank you.
V Aguado You can find the links to the cables in this video link th-cam.com/video/znwgM-FA-5g/w-d-xo.html Make sure you scan your QR code and check if you have a Zino or a Zino-Y and select the correct cable for that model.
The gimbal on my zino suddenly stops working. No crash and no fall whatsoever. Updated with the latest firmware. The gimbal would not move or do a thing but the camera is ok.
Hello can you help me please ? The caméra don't move but can film. There is a message : " défaillance du capteur d'angle de cardan" in English : defect of the gimbal angle sensor . What can i do?
bonjour : calibrage cardan ou reset cardan, les tutos sont sur youtube. Si ca ne donne rien remplacement du cable moteur sur gimbal (introuvable) donc renvoyer a Hubsan.
hey QC GUY, i just updated latest firmware and now when i powered up the up the zino, the gimbal was humming at a high frequency. havent flown it like this yet but noise tends to stop when the drone is moved. do you have a fix for this please?
Hi i try all the best and follow all your tutorial but my drone not fix the gimbal After the last update, It seems yaw Is faulty...i have One mounth remaning of warranty and hubsan read my message but not unswer me..i have only 1 hrs of fly never damege or fall on the ground..i try everythin, with your app,with push button reset with app calibration on smartphone EVERYTHINK gimbal status on app say normal but Is not normal yaw turn left and right when i inclinate the drone..i have warranty but hubsan dont want to unswer me and dont want repair or replace MT drone how i can do!
Vitus Films Forget you’re warranty. They are ignoring people unfortunately. That’s why I think I am fixing so many peoples Zino’s. I do better faster service than they do anyhow.
@@QCGUY oh ok! So not expencive the cable...where i can find it for my model? Im able to repair my self (i repair Also smartphone) but Need to match the model of the cable..im Also scarried It not the cable..if you give me your email i Will show you how the gimbal do and understand if Is the cable or the motor
Gabe Sparty Not available at this time. I have a connection at Hubsan that sent me a defective ZINO to strip for parts. They will have these parts soon.
enan enani One could say both but software can fix it. Do you have this error? This has fixed it for other people. drive.google.com/file/d/1h6tuq5oDeGsDrwO9JHHivInxRTpLOUbp/view
Hi QC guy. I have Hubsan H117S Zino, When launching the drone, the camera vibrates. Once it stops vibrating it cannot be moved by the remote. Otherwise, it does not smudge and is clearly visible
Gimbal calibration tool and software procedure most likely. Is it giving you a gimbal error code in the app under the gimbal tab? 0x0080 is generally the code in that situation.
Hello Friend! I made the exchange of my gimbal that broke the apartment. The drone works, the camera works, but gimbal is shaking with error 0x0004, I've already updated all the firmware. Do you have any suggestion? Thankful!
If it's shaking a lot and fast like a big twitch then it's a connection in the camera or the board. So far that has happened in 4 that I fixed so I think that is the problem you have.
@@QCGUY It only moves when it turns on and does not stabilize the gimbal. If you can watch the video I recorded! Thank you! th-cam.com/video/hp4L2tVxQ28/w-d-xo.html
It means the screws for mounting are short or long. Front motor is long and rear is short. The motors are the same but just different screws so if you have your old screws it doesn't matter.
kevin bellanger No, at the time it wasn’t available anywhere ...they don’t sell them or the required software tool they now say you need to do this. There is just now a supplier selling them but I have yet to hear anyone say they got one or installed it. I advise to wait till Hubsan gets off the pot and does something about making it available.
@@waleedmuniri2138 Might still be out of stock....many people are buying them and the cables. The cables are usually the problem though. www.aliexpress.com/item/33054123144.html?spm=a2g0o.detail.1000014.3.728e6a76OhQJaA&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.133222.0&scm_id=1007.13338.133222.0&scm-url=1007.13338.133222.0&pvid=88f75da4-170a-41b1-b892-e6eb8001e10f
Can you help me too? My gimbal status shows the error 0x0008. In your other video, I also searched in vain for the reset button. The camera is okay. The gimbal does not move anymore.
I crashed my drone today and my gimbal and camera broke down. Now I am looling for spare parts but I can not find something. Can you sell me the whole gimbal? Best regards Matthias
Hey Chris, your videos are great, thanks. I need to replace my camera and gimbal on my Zino but Hubsan won't sell it to me and recommends I go back to the company I bought it from. Can I buy it from you or can I send you my drone for you to repair? I would be happy to do that. I can't message you on Facebook as I got off of that some time ago. I would be happy to give you my personal email account. Thanks for any information or help you can provide. Keep up the good work man! Best regards, Reid
@@QCGUY So, I'm the guy that wants to mount an Insta ONE X to the top of my Zino and get aerial 360 flying footage. In testing the addition of adding 5 ounces of weight to the top of the Zino, I was also the idiot that rather than checking where "center" of the drone is said, "this looks like a good spot" and placed the weight there. It took off just fine but then nosed down and flew straight into the ground of the parking lot pretty hard. Yeah, second idiotic move that didn't test it in the grass. Anyhow, the camera is pretty scratched up, does work but I get, "Gimbal initialization error, please restart the aircraft" every time I turn it on. All the parts move ok but when I spin the camera down by hand, it will just stay there and it doesn't respond to the gimbal up and down controls. The lens looks ok but it's pretty scratched up on the sides and back where the four slots are. It also gives me video to my phone. It took a pretty hard hit and I think it's toast. Thoughts? Thanks!
@@reidoverturf First, your not a idiot! Just learning trail and error the hard way. lol It does sound as if a new camera is a better option. Aliexpress sells the cameras and the calibration tool you will need but here is where you need to decide what is best. Spend $100 plus shipping plus what ever the tool costs and then pay shipping to and from me for repair. These are selling right now for $235 so I would personally just buy a new one and have one for parts. Some of these parts coming from these sellers haven't proven to always work either. I have had them send me bad cables and 3rd party copies of genuine parts.
@@QCGUY Good information Chris, thanks! I will do a little research and maybe just buy a new one which, is what I was considering anyway. I just did my first waypoint flight. I'm getting ready for that 360 degree drone footage! ;) Keep up the good work and thanks a lot for responding. You're the man. Regards, Reid
@@reidoverturf Are you in my rc hobby shopper group? I have the links and codes to the lowest price when available. Sale ends today for the Zino I think.
If you comment I see it so yes I saw you problem in all the places you posted it. You only need to comment once so no need to copy and past into multiple videos for me to see it.
Drone Vidéos I don’t know what Fible means. I assume you’re saying you have no gps signal visible. It could be a few things but many have burned out wifi modules. There is no parts available for this fix yet. Join the group and start a discussion about it. Thanks
Desculpe, Pessoal para quem esta tendo o problema Error0x0008 no gimbal após a atualização é só subir essa versão do gimbal que irá ser resolvido, em seguida deverão voltar para a versão V3.0.2
Very labor intensive. Levels of dexterity I'm not likely to achieve very soon. Thanks for showing the breakdown. Getting a better grasp on the engineering and how many connections could be damaged in a crash
Great tutorial as usual. Thanks for showing us the fussy details. Love this stuff.👍
The two screws in the shoulder joints are nearly impossible for me to get out!
Yet you did easily!
Hubsan gave me a flathead screwdriver?
Need the right screwdriver set and I file the tip off just a tad so they fit better.
That screwdriver they give you is for the props with Philips head screws. 😂
QC GUY Filing the tips off makes perfect sense
QC GUY I just bought six different small Phillips head screw drivers hoping one will work. I don’t have anything to file the tip down. But that is exactly the problem o am having. The tips are too long
Nice job. Do you know where to buy parts as gimbal or gimbal cable ; Not on sale on Hubsan official site.
Sorry, did you find the parts? They have them at Aliexpress now.
Why would
My camera work but the gimbal doesn’t? Everything seemed plugged in.
Improve Your Guitar Skills and Sound 2 separate cables. Your gimbal motor cable is where you will find your problem.
Guess I’m gonna figure out if a zino can fly without a gimbal and camera
I can tell you but you’ll figure it out. 👍
QC GUY Even is it does, what’s the point?
@@QCGUY Yup. No connection without cable from gimbal. I think if I replace the cable, it may work.
Thanks for the video. Had my first crash today and everything is fine except the yaw motor doesn't work so the video shakes rendering taking video useless and therefore the zino useless. I was hoping that a ribbon came loose and when I put it back together it will be fine again. It isn't. I don't know if I should buy a replacement camera or get another zino and keep this one for spare parts.
mavros777 dude I literally had same thing happen on the same day 😂. I was thinking about taking it apart I haven’t gone that far and maybe a ribbon cane loose but I’m debating the same thing if I need to just buy a new one and keep old or try to repair this thing
update: I ended up taking it apart to check connections and stuff and it all looked good and got it back on and same thing, just shaky footage, still recording and good quality just ever so slightly shaky. enough to make it annoying and not even worth it. if anyone figures this how or husband releases the "tool" to put a new camera in let me know.
@ yes I would think that would help. unfortunately mine didn't help because I had a shaky gimbal and no error code but with the error code it may fix it!
Really good vid mate nice one DON 👍👍👍👍👍
Only Hubsan don`t sell camera & gimbal, but offering whole drone, same about mainboard..
Eventually they will. This is how it always goes.
If you go on aliex you can find but It Will cost you 90 euro!
Ok, thanks and keep up with the works. ; )
I have seen your videos, and tried it out, but I have stille a steady red light. The only thing left, is the gimbal. I pretty sure it's the problem.
Where can I buy a new.
Thanks for you easy learning videos
Best regards
Joachim
Joachim Pedersen If you google it you will find plenty of sources. I don’t know your supplier preference or location so it’s best you research and choose. It’s most likely your camera cable though. 👍
Is the camera removal the same for the PRO model also?
Miller Ingram Yes
Man now I am having trouble with one of the Barometer screws
Those screws are so tiny. I don't have a proper screwdriver for them, because I broke the flex moving the drone up and down. You better unplug that flex and remove de entire module.
Also, are the pink squared substance an electro conduit insulator of just simple double putty?
Miller Ingram Thermal Conductive Silicone Pad
Hi, thank you for a fantastic video. I've just replaced my gimbal with a brand new one following your video, and when I turn the drone on, the gimbal goes crazy, flapping and flailing in every direction. It occasionally stops, but then starts again. I have double checked and triple checked the connections, they are all tight; the tops of the ribbon cable connectors where they connect to the drone (on the hubsan zino pro) were bare metal, so I put the foam pads on top of them which were in place on the outgoing gimbal' connectors.
Do you know what might be causing this? It seems almost definitely a connection issue. The camera works fine, so could it be the motor ribbon cable? I barely touched it during fitting and it's a brand new gimbal, how likely is it that a ribbon cable is faulty?
Thanks so much for any advice you can offer.
That’s normal when you replace with a different one. It needs to be calibrated with the calibration cover and software.
I have a video on doing this calibration as well…
You do that and you will be fine 👍🏻
Oh brilliant thanks. It’s really violent flailing around, not just shaking. Rather unnerving. Thanks for your reply, it’s a huge help.
@@noodleet no worries..,
Once you start the first click of the process it will stop.
Note, if it time’s out just keep trying. This will definitely get you you in shape. 👍🏻
@@QCGUY Fantastic. Thanks very much again!
While ordering replacement motor for hubsan zino long line means front motor and short kine rear motor?
Motor plus long screw is front and motor plus short screw is rear. I am loading a video right now on how to replace motors and esc's. You should replace motors and esc's at the same time because it takes time and often people think the motor is bad and it is really the esc that is bad. Replace both!
@@QCGUY yes i am replacing both
Thanks for the help
@@waleedmuniri2138 Look for my video...uploading now :)
@@QCGUY now?
@@QCGUY whole process of replacing?
After an accident my ZINO broke down and I assumed it was the Gimbal. I have bought one and installed it according to this excellent tutorial:
HOW TO REPLACE CAMERA & 3 AXIS GIMBAL
However, after changing it and introducing new firmware, the gimbal jerks when restarting the drone, it becomes inert and I get a message "the gimbal is protected. Check that it is not stuck".
What I can do?
Simple fix...
New gimbals aren’t plug n play. You need to follow this next video and you will be set.
Keep me posted 👍🏻
th-cam.com/video/Apv7-s6Ftds/w-d-xo.html
@@QCGUY Great your immediate response that I greatly appreciate.
Tonight I'm going to do what you suggest but it seems to me that it will be the solution
Thanks thanks...
@@juanantonioayllon5213 It will definitely fix it 👍🏻
@@QCGUY I've seen your video. Excellent
But ... now I have to look for the GIMBAL COVER TOOL
I just ordered it from China and it will take me a few days.
Thanks again
@@juanantonioayllon5213 every zino should have one or at least make it part of the sale with a new gimbal. They don’t even tell you you’ll need one.
Hello QC guy, I'm receiving error 0x0080 can't initialize the Gimbal, I noticed that when turn on the Gimbal doesn't do the initial testing it just shakes a little bit, it is not stuck or anything like that. Have you ever had this error before? Thanks for your help
For that you need the gimbal tool and calibration software for that tool in most every case. I have a video on it and how to do it in my list of videos.
Thanks for this great tutorial. Can you tell me please where i can get a new gimbal an d Camera for the zino? Thanks!!!!
MrKnisder www.rc-helicopter-spare-parts-online.com/hubsan-h117s-zino-rc-quadcopter-spare-parts-camera-plateform-and-4k-wifi-camera-set-p-20250.html
@@QCGUY thanks my friend!
@@QCGUY so technically I could still put the new camera in and it would work? or do I need to wait for the tool? if you can help before husband slowly decides to roll the tool out let me know. ill buy parts and pay for labor of course.
Chad R
I recently helped a guy do it and it was a disaster! I have done it by loading the very early firmware onto the quad to get it to recognize it and then could update it with the latest and those quads are still flying today but in this last case it would not recognize the camera and all I can think of is newer firmware won’t allow my method.
It’s best to wait the wait but keep bugging them at the same time for this part and tool.
It’s ridiculous!!!!
QC GUY thanks for the fast response brother. The video was on point and it was easy to take the camera out and look it over but I believe it must be a ribbon that is internal that is the problem. I have made 3 inquires to hubsan and I’ve replied to them all and also emailed Sam lee and absolutely no response at all yet. The first inquiry was over a month ago, now the gimbal issue. This is why I should stick with dji products, their service is top notch and I got my fly away spark back in a couple weeks...thanks for all the great videos either way
Estupendo tutorial!!👏👏
Necesito reparar o sustituir el gimbal camara de mi dron Zino. Podría decirme donde comprar el cable de conexión del gimbal o la propia cámara con gimbal? No encuentro estas piezas de recambio. Muchas gracias.
Great tutorial !! 👏👏 I need to repair or replace the gimbal camera of my drone Zino. Could you tell me where to buy the gimbal connection cable or the camera with gimbal itself? I can't find these spare parts. Thank you
Please use translator...
Great tutorial !! 👏👏 I need to repair or replace the gimbal camera of my drone Zino. Could you tell me where to buy the gimbal connection cable or the camera with gimbal itself? I can't find these spare parts. Thank you.
V Aguado You can find the links to the cables in this video link th-cam.com/video/znwgM-FA-5g/w-d-xo.html
Make sure you scan your QR code and check if you have a Zino or a Zino-Y and select the correct cable for that model.
@@QCGUY
I will look for the product and try to fix it.
Thank you QC GUY
@@vaguado6878 I'll say a prayer....this is a touchy repair, Keep me posted!
The gimbal on my zino suddenly stops working. No crash and no fall whatsoever. Updated with the latest firmware. The gimbal would not move or do a thing but the camera is ok.
z8ree I answered your comment about this in another one of my videos you posted it on.
Post a comment once and I will always reply. Thanks 🙏
@@QCGUY thanks for your reply. Only noticed your reply later. Will take note. Thanks again.
@@z8ree No problem...more comments just causes more work is all. I will almost always answer so bare with me. Thanks
Man the screws get even smaller inside
Very Good !
Hello can you help me please ?
The caméra don't move but can film. There is a message : " défaillance du capteur d'angle de cardan" in English : defect of the gimbal angle sensor .
What can i do?
bonjour : calibrage cardan ou reset cardan, les tutos sont sur youtube. Si ca ne donne rien remplacement du cable moteur sur gimbal (introuvable) donc renvoyer a Hubsan.
@@jeanpeuplu4772 Merci de ta réponse mais j'ai trouvé la solution. il fallait faire un reset du cardan en appuyant sur la partie métallique .
hey QC GUY, i just updated latest firmware and now when i powered up the up the zino, the gimbal was humming at a high frequency. havent flown it like this yet but noise tends to stop when the drone is moved. do you have a fix for this please?
Sorry so late but it may need a calibration. Most likely it needs blown out or a cable is loose and causing it to hang up and over work the motor.
Hi i try all the best and follow all your tutorial but my drone not fix the gimbal After the last update, It seems yaw Is faulty...i have One mounth remaning of warranty and hubsan read my message but not unswer me..i have only 1 hrs of fly never damege or fall on the ground..i try everythin, with your app,with push button reset with app calibration on smartphone EVERYTHINK gimbal status on app say normal but Is not normal yaw turn left and right when i inclinate the drone..i have warranty but hubsan dont want to unswer me and dont want repair or replace MT drone how i can do!
Vitus Films Forget you’re warranty. They are ignoring people unfortunately. That’s why I think I am fixing so many peoples Zino’s.
I do better faster service than they do anyhow.
@@QCGUY ok thanks but for you the problem Is the motor or only the flat cable?
Vitus Films cable
@@QCGUY oh ok! So not expencive the cable...where i can find it for my model? Im able to repair my self (i repair Also smartphone) but Need to match the model of the cable..im Also scarried It not the cable..if you give me your email i Will show you how the gimbal do and understand if Is the cable or the motor
Hello
how do you get a new camera for the zino mine is H S. thank you and very nice explanation video👌👌👌
Gabe Sparty Not available at this time. I have a connection at Hubsan that sent me a defective ZINO to strip for parts. They will have these parts soon.
ERROR 8XOOO8 OF THE HUBSAN ZINO GUIMBAL, IS MECHANICAL, OR SOFTWARE?. THANKS FOR YOUR VIDEOS
enan enani One could say both but software can fix it. Do you have this error?
This has fixed it for other people.
drive.google.com/file/d/1h6tuq5oDeGsDrwO9JHHivInxRTpLOUbp/view
Hi QC guy. I have Hubsan H117S Zino, When launching the drone, the camera vibrates. Once it stops vibrating it cannot be moved by the remote. Otherwise, it does not smudge and is clearly visible
Gimbal calibration tool and software procedure most likely. Is it giving you a gimbal error code in the app under the gimbal tab? 0x0080 is generally the code in that situation.
Error 0x0004
@@ЦветанЦанов you may need to replace your gimbal motor flex cable.
Hello Friend! I made the exchange of my gimbal that broke the apartment. The drone works, the camera works, but gimbal is shaking with error 0x0004, I've already updated all the firmware. Do you have any suggestion? Thankful!
If it's shaking a lot and fast like a big twitch then it's a connection in the camera or the board. So far that has happened in 4 that I fixed so I think that is the problem you have.
@@QCGUY It only moves when it turns on and does not stabilize the gimbal. If you can watch the video I recorded! Thank you!
th-cam.com/video/hp4L2tVxQ28/w-d-xo.html
I think I'll be using this video at some point.
surfpsych many will I suspect. Since posted I received several messages of people needing unavailable parts to do the board or camera.
hello. do you know what short-line & long-line motors means? i want to change the motors but i cant figure out
It means the screws for mounting are short or long. Front motor is long and rear is short. The motors are the same but just different screws so if you have your old screws it doesn't matter.
QC GUY thank you
You don't happen to have an extra lens do you?
Miller Ingram I have spare camera/gimbals but mostly with bad cables and that’s the only issue wrong with them.
Hello can I buy a gimbal part with camera or without?
Argyris Kioukas no but you and everyone should push Hubsan to sell them.
Where can I buy the camera assembly
I have some if you want to contact me. kitchwade@gmail.com
@@QCGUY ok thanks!
Helo friend ! where can I finding a gimbal of this to buy ?
Google will lead you to anyone selling them. I have some stocked if you live in the states.
you left out , where to get a replacement camera ?
kevin bellanger No, at the time it wasn’t available anywhere ...they don’t sell them or the required software tool they now say you need to do this. There is just now a supplier selling them but I have yet to hear anyone say they got one or installed it. I advise to wait till Hubsan gets off the pot and does something about making it available.
where to buy gimbal assembly mine damaged in crash landing.
Dave Hobby can’t yet...at least not from hubsan with the promised tool needed.
where to buy gimbal camera for drone hubsan zino
Currently not available for sale
Aliexpress
@@QCGUY link please
@@waleedmuniri2138 Might still be out of stock....many people are buying them and the cables. The cables are usually the problem though.
www.aliexpress.com/item/33054123144.html?spm=a2g0o.detail.1000014.3.728e6a76OhQJaA&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.133222.0&scm_id=1007.13338.133222.0&scm-url=1007.13338.133222.0&pvid=88f75da4-170a-41b1-b892-e6eb8001e10f
can you help me, my gimbal has problem after crash on the mud and water, i blow air on it then after it dried out i experience gimbal error 0x0004
Jude Stephen Romanillos facebook.com/groups/HubsanQC/?ref=share
Can you help me too? My gimbal status shows the error 0x0008. In your other video, I also searched in vain for the reset button. The camera is okay. The gimbal does not move anymore.
Gimbal error 0x0008 requires a gimbal patch firmware. Do you still have this error?
Hi, yes I still have this error. Where can I get the firmware. Thanks for your support.
@@elifbeyzaebru www.dropbox.com/s/lxcoiay5gqq7e0s/Gimbal%20Patch.zip?dl=0
If your gimbal isn't moving at all you may also have a connection problem inside the quad or on the gimbal.
I will install the firmware tonight. If it does not work again, I will disassemble the drone and look for the contacts.
interesante
I crashed my drone today and my gimbal and camera broke down. Now I am looling for spare parts but I can not find something. Can you sell me the whole gimbal? Best regards Matthias
I see you joined my group. Post a picture of the camera/gimbal damage there and let me know what country you’re in.
Hey Chris, your videos are great, thanks.
I need to replace my camera and gimbal on my Zino but Hubsan won't sell it to me and recommends I go back to the company I bought it from. Can I buy it from you or can I send you my drone for you to repair? I would be happy to do that. I can't message you on Facebook as I got off of that some time ago. I would be happy to give you my personal email account. Thanks for any information or help you can provide.
Keep up the good work man! Best regards, Reid
Why do you think you need to replace the complete camera/gimbal?
@@QCGUY So, I'm the guy that wants to mount an Insta ONE X to the top of my Zino and get aerial 360 flying footage. In testing the addition of adding 5 ounces of weight to the top of the Zino, I was also the idiot that rather than checking where "center" of the drone is said, "this looks like a good spot" and placed the weight there. It took off just fine but then nosed down and flew straight into the ground of the parking lot pretty hard. Yeah, second idiotic move that didn't test it in the grass. Anyhow, the camera is pretty scratched up, does work but I get, "Gimbal initialization error, please restart the aircraft" every time I turn it on.
All the parts move ok but when I spin the camera down by hand, it will just stay there and it doesn't respond to the gimbal up and down controls. The lens looks ok but it's pretty scratched up on the sides and back where the four slots are. It also gives me video to my phone. It took a pretty hard hit and I think it's toast. Thoughts? Thanks!
@@reidoverturf First, your not a idiot! Just learning trail and error the hard way. lol It does sound as if a new camera is a better option. Aliexpress sells the cameras and the calibration tool you will need but here is where you need to decide what is best. Spend $100 plus shipping plus what ever the tool costs and then pay shipping to and from me for repair. These are selling right now for $235 so I would personally just buy a new one and have one for parts. Some of these parts coming from these sellers haven't proven to always work either. I have had them send me bad cables and 3rd party copies of genuine parts.
@@QCGUY Good information Chris, thanks! I will do a little research and maybe just buy a new one which, is what I was considering anyway.
I just did my first waypoint flight. I'm getting ready for that 360 degree drone footage! ;) Keep up the good work and thanks a lot for responding. You're the man.
Regards,
Reid
@@reidoverturf Are you in my rc hobby shopper group? I have the links and codes to the lowest price when available. Sale ends today for the Zino I think.
good afternoon would lose give me the power button measurements i lost my
Fernando Imports I don’t have one apart at the moment but you can order them from hubsan and other places now.
Hello QC GUY
I don't know if you have seen my last comment.
Can you help me solve the problem?
If you comment I see it so yes I saw you problem in all the places you posted it. You only need to comment once so no need to copy and past into multiple videos for me to see it.
signal GPS fible ?? how to solution !!
Drone Vidéos Fible?
@@QCGUY no GPS fible
Drone Vidéos I don’t know what Fible means. I assume you’re saying you have no gps signal visible.
It could be a few things but many have burned out wifi modules.
There is no parts available for this fix yet.
Join the group and start a discussion about it. Thanks
@@QCGUY ok
error 0x0001 ?? conhece?
You can search errors in my group and post your problems for further help. Thanks
facebook.com/groups/HubsanQC/?ref=share
drive.google.com/file/d/1KNuL5Hg0k_B9yUuA8dJxA-xXOSBs2d-z/view?usp=sharing
Atualizem com essa versão do gimbal que sera resolvido
What is it? Explain when you share please. If not I delete links....Thanks
Desculpe, Pessoal para quem esta tendo o problema Error0x0008 no gimbal após a atualização é só subir essa versão do gimbal que irá ser resolvido, em seguida deverão voltar para a versão V3.0.2