6.4 Ford How To Remove Turbo
ฝัง
- เผยแพร่เมื่อ 4 ก.พ. 2023
- 6.4 Ford How To Remove Turbo
In this video I have a 2008 Ford 6.4 Turbo Diesel with a seized turbo on the driver side. I will show you a TIMELAPSE video of this turbo being removed, The cab is off already.
HERE IS A LINK TO MY AMAZON INFLUENCER PAGE WHERE I LINK SOME OF THE PRODUCTS I RECOMMEND.
www.amazon.com/shop/nutsbolts...
The Amazon links are a paid partnership with Amazon.
Find me here:
beacons.ai/nutsnbolts - บันเทิง
I was surprised you never took the oil cooler off and flushed it or replaced it. I heard Bullet Proof has a slightly modified one that is much better. Maybe cost was a factor. But if the coolant side plugs and you have to go back in your not saving anything.
I recommended that but customer declined. Thanks for watching
Nice info gotta get started Thank You Chad .
You are welcome. Message me on Instagram if you need any help. Thanks for watching
If someone doesn't pay attention to how the seal for the passengers side turbo drain is suppose to be installed?
It goes thick bevel down, yes it matters!
I am fixing my mistake for not paying attention & having an oil leak because of it.
Also, the F350 dually, I am working on, did not have an oil cooler. So I would guess, they are an optional item.
Very true about the turbo drain, sorry you are having to do it over. Thx for watching
@@NutsandBoltswithTone Thanx for posting Your vid, as I seen my issue clearly, because of it.
Live & Learn, At least I didn't have to Remove the Body off the Frame a second tyme. I was able to loosen everything up, & barely wiggle the right side turbo out, For the Win.
Had a UPS Truck that Needed a Brake Job, So I will Be wiggling the Turbo back together Monday.
You could do away with the music or at least turn it way down. Other than that good job
After the problems and the cause, I'm surprised that the EGR wasn't deleted. How many miles on this truck?
We live in California cannot delete emissions. Cannot recall the amount of miles approximately 100k
I was forced to replace the turbos of my truck about 3 times and didn’t have to remove the cab 😅😅😊😊
Very nice. It can be done. If I'm not removing the cab I lift the front about 4 or 5 inches. Thanks for watching
@Nuts and bolts with Tone What re the Snap on special sockets for the clamp bolts? Do you have a OEM #? TIA
FIHC140, FIHC160, FIHCM8 and FIHCM10 (7/16 in., 1/2 in., 8mm, 10mm) (4 pcs) in storage tray.
here is a link
www.kbtools.com/product/snap-on-204fihc/
@@NutsandBoltswithTone thank you very much my friend! I like your content and the suggestions for tools. Unbiased opinion from pros is what everybody needs to make choices! Cheers
Is that a original turbos where can I get them at
No not on this one. I was told Oem turbos were not available but I think it was a time frame issue because I've put oem turbos in these trucks. Thanks for watching
Ok no problem thanks
Looo🧏💪💪💪
Thanks