If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.
Great guide right there! I’ve got to do the rear shocks as well as the bushes so I now know that I can knock them both out at the same time! Love this collection of jobs for the Laguna. Have a 1.9Tdi myself but the jobs remain the same!!
Hi. Where did you get the removal and installation set? I have trouble finding it. My Haynes manual indicates that that set is only needed when you don't remove the axle from the vehicle. Thanks to your video I can clearly see it is always needed.
Thank you for the positive comments. I bought it here www.amazon.co.uk/gp/product/B01NB1AQTA/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 www.amazon.co.uk/dp/B011KKJ6I0/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B011KKJ6I0&pd_rd_w=BFTYG&pf_rd_p=1055d8b2-c10c-4d7d-b50d-96300553e15d&pd_rd_wg=jzGOm&pf_rd_r=9KQA0YRZJ2Q01NY8DP1T&pd_rd_r=69f308ac-4c3e-4bed-9ffc-51e93bfaee57&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFPWFpFTkdLREJPWVQmZW5jcnlwdGVkSWQ9QTEwMjYyMzUzOFhHVlpVVDFXQk43JmVuY3J5cHRlZEFkSWQ9QTAxODEwNzEyMU1DOThOV1pKVksxJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@CoatsandGaiters Thanks for the quick response. It always seem to come down to the right search term. Couldn't find anything at first, now using the description from your link suddenly gives me several other links.
3 ปีที่แล้ว +2
Big thanks for your video. I will have to replace this part by myself and you explained very well all the process. Fortunately i have exactly the same car :)
Thank you for the comment and it's good to hear I may have helped you out. Good luck.
3 ปีที่แล้ว +1
I made the change today of the both side. The bolt that was hard to remove has break into its place on the both side.... I saw it looks like 10.9 steel 9 diameter but font know the length. dont know how to remove too the rest of the bolt still in place..
@ Oh blimey, sorry to hear that. Mine was stuck in place as well and had to keep winding back and fourth to get it out. A snapped bolt isn't going to be fun to remove. Might be a case of drill the bolt out and use and ezi out thread remover. Sometimes lots of heat and penetrating fluid does it.
I remember I had the same shock when I saw it and thought I don't have one of those sockets as it's not a torx. Its a standard 16mm socket with the 12 splines as apposed to the 6 sided 16mm sockets. It caught me this one.
Hello, have a question for you. Whats the long pipe called that is between the bushings? Mine has rotten and needs replacing, but i dont know whats the part called. Thanks!
@@CoatsandGaiters yes i was thinking about welding it, but the bar is so rusted i d have to cut off most of the length of it to fix it. At 7:03 you are removing that bolt from the bushing and that bolt is holding on a long bar thats is connected to the bushing on the other side. I was looking for the name of that part everywhere, even called the local parts store and they didnt even know the name of that bar. My car is a 2005 laguna 2 1.9 disel
@@dagsbrunenieks7727 REAR AXLE SUPPORT BAR STABILIZER ?? BACK AXLE LATERAL BRACE BAR, USUALLY RUSTS THROUGH maybe torsion bar, might be two a front and rear torsion bar on the rear axle.
Brilliant tooling skills just as filming. Incredible. Thanx. About to do this next week. Just wondering how to get around that bushing press tool. Forexample: Two robust cups, drill 2 holes in them and use a coil spring threaded removal kit, then with a gun you can aply 300Nm easily and literary shoot the old bushing out in a seconds...
Thank you for the compliment. The tool can be bought pretty cheaply for £37 but you maybe able to do it like you say and some determination. amzn.to/3tP3Il7
Thank you for that George. Hope the video helps. I did do the bushings again last year and made some video's on that. Might be more entertaining as things didn't go to plan very well. th-cam.com/video/ZNva04lk_Gs/w-d-xo.html
Hi ! If is not too much can you tell me the diameter of the tool? I mean the big piece used for installation. May be I can convert to use on toyouta ..Many thanks !
Just don't over tighten like I did on my second set of videos when I later replaced the bushes. The bush was in but I assumed it wasn't fully in for some reason. th-cam.com/users/shortsCOf9ogScTNA?feature=shares
Did you fit original equipment parts as aftermarket may not last as long. I think they have gone again on my wife's car but we fitted aftermarket parts.
@@CoatsandGaiters laguna its realy great car. Two years ago l must change for a biger espace 4. Its olso like laguna. Back break front break and wery wery close.
Thank you ............"You never put the shock absorbers on jacked up! Just like the housing from the camp! You do everything when the wheels are mounted. Otherwise good video! "
I know they are old cars now but I have done these twice and they have gone again it is disgusting Renault have never done a modification on these bushes as they are clearly made wrong and the failure rate unacceptable if this is Renault Engineering and customer care steer clear in future.
It's funny you say that as the original ones seem to last years but the replacements don't seem the same. Maybe the rubber has changed over the years and degrades quicker.
@@CoatsandGaiters the epb release (yellow T handle under the arm rest) You can turn the ignition off then release the epb using the normal little lever. Then when you open the door. Electrics turn off and epb stays off too. 👌
@@CoatsandGaiters not many people realise it and this causes them to prematurely pull the release cable which doesn't always reset itself. You can manually ram the cable (right side I believe) and click it back into the release mechanism inside the unit. People spend hundreds on having the unit repaired and it's as simple as pushing the cable 😆.
Nice video. Very clear. Good video quality. Clear voice over. There is one remark. I think that you should tighten the nut (with the bearing underneath it), and not the bolt head. This will give you a much higher tension in the bolt, at the same torque. I have the impression that the axle bush not not seated completely, because of this error. I just saw that you do it in the right way here: th-cam.com/video/U63esUjKLYs/w-d-xo.html
Somehow I missed your comment. Sorry. I think they have electrical gremlins but my wife loves Laguna's and to be honest they don't seem to rust and parts are cheap.
If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.
Great guide right there! I’ve got to do the rear shocks as well as the bushes so I now know that I can knock them both out at the same time! Love this collection of jobs for the Laguna. Have a 1.9Tdi myself but the jobs remain the same!!
Thank you Will for the compliment, hope these videos help you get them jobs done ok.
Thank you, very helpful, all the best from Russia!
Thank you for the comment and good to hear it helped.
Thanks a lot for the pedagogical approach ! ❤
Thank you
Hi great video but can you explain why you compressed the rear springs?
The spring will be forcing the damper apart making it a bit harder to remove. By compressing the spring it takes any loading off the bolts.
Hi. Where did you get the removal and installation set? I have trouble finding it.
My Haynes manual indicates that that set is only needed when you don't remove the axle from the vehicle. Thanks to your video I can clearly see it is always needed.
Thank you for the positive comments. I bought it here www.amazon.co.uk/gp/product/B01NB1AQTA/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
www.amazon.co.uk/dp/B011KKJ6I0/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B011KKJ6I0&pd_rd_w=BFTYG&pf_rd_p=1055d8b2-c10c-4d7d-b50d-96300553e15d&pd_rd_wg=jzGOm&pf_rd_r=9KQA0YRZJ2Q01NY8DP1T&pd_rd_r=69f308ac-4c3e-4bed-9ffc-51e93bfaee57&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFPWFpFTkdLREJPWVQmZW5jcnlwdGVkSWQ9QTEwMjYyMzUzOFhHVlpVVDFXQk43JmVuY3J5cHRlZEFkSWQ9QTAxODEwNzEyMU1DOThOV1pKVksxJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@CoatsandGaiters Thanks for the quick response. It always seem to come down to the right search term. Couldn't find anything at first, now using the description from your link suddenly gives me several other links.
Big thanks for your video. I will have to replace this part by myself and you explained very well all the process. Fortunately i have exactly the same car :)
Thank you for the comment and it's good to hear I may have helped you out. Good luck.
I made the change today of the both side. The bolt that was hard to remove has break into its place on the both side.... I saw it looks like 10.9 steel 9 diameter but font know the length. dont know how to remove too the rest of the bolt still in place..
@ Oh blimey, sorry to hear that. Mine was stuck in place as well and had to keep winding back and fourth to get it out. A snapped bolt isn't going to be fun to remove. Might be a case of drill the bolt out and use and ezi out thread remover. Sometimes lots of heat and penetrating fluid does it.
Wich wrench did you use to unscrew the long bolt that goes in the bushing?
Its not a normal 16 mm?
I remember I had the same shock when I saw it and thought I don't have one of those sockets as it's not a torx. Its a standard 16mm socket with the 12 splines as apposed to the 6 sided 16mm sockets. It caught me this one.
@@CoatsandGaiters Thank you the 6 side does not work i wil try the 12 !
I tried torx but thats not going to work!
Thank you! Wonderful and very informative video !
Thank you for the kind comment. It's nice to know I might be helping others like me, that mend our own cars.
Hello, have a question for you. Whats the long pipe called that is between the bushings? Mine has rotten and needs replacing, but i dont know whats the part called. Thanks!
I think your meaning the lower wishbone or control arm.
@@CoatsandGaiters Thanks for the reply, but i ment the long pipe that runs between the axle bolts, mine is rusted and it wont pass the MOT
@@dagsbrunenieks7727 Is it an anti roll bar, sway bar, link rod or the main suspension? most things are weldable.
@@CoatsandGaiters yes i was thinking about welding it, but the bar is so rusted i d have to cut off most of the length of it to fix it. At 7:03 you are removing that bolt from the bushing and that bolt is holding on a long bar thats is connected to the bushing on the other side. I was looking for the name of that part everywhere, even called the local parts store and they didnt even know the name of that bar. My car is a 2005 laguna 2 1.9 disel
@@dagsbrunenieks7727 REAR AXLE SUPPORT BAR STABILIZER ?? BACK AXLE LATERAL BRACE BAR, USUALLY RUSTS THROUGH maybe torsion bar, might be two a front and rear torsion bar on the rear axle.
Thanks! you worked like a pro..
Thank you for your kind comment.
Brilliant tooling skills just as filming. Incredible. Thanx. About to do this next week. Just wondering how to get around that bushing press tool. Forexample: Two robust cups, drill 2 holes in them and use a coil spring threaded removal kit, then with a gun you can aply 300Nm easily and literary shoot the old bushing out in a seconds...
Thank you for the compliment. The tool can be bought pretty cheaply for £37 but you maybe able to do it like you say and some determination. amzn.to/3tP3Il7
Really nice vid! You did it like a pro mechanic. I just bought laguna 2 Grandtour and of course those bushing are nearly done so I'll have to do them
Thank you for that George. Hope the video helps. I did do the bushings again last year and made some video's on that. Might be more entertaining as things didn't go to plan very well. th-cam.com/video/ZNva04lk_Gs/w-d-xo.html
great video, but you forgot to mention that the bushes are different sizes and are not interchangeable, thank you anyway video was a massive help.
Thank you for the comment. Version 2 th-cam.com/video/U63esUjKLYs/w-d-xo.htmlsi=S0FEimIgdOzwdZ9c
Hi ! If is not too much can you tell me the diameter of the tool? I mean the big piece used for installation. May be I can convert to use on toyouta ..Many thanks !
The external diameter of the large deep one of the three is 88.90mm
@@CoatsandGaiters Thank you soo much ! I will try to see if I can adapt to work with it on Toyota ! Many thanks !
@@beeland1198 Good Luck
Thank you. Very useful video :)
Thank you for the comment and good to hear it helped.
Amazing and well explained video, do you happen to know if the same process would work on a Laguna 3?
I’d be very surprised if they were different. A quick peek should confirm if they are the same by removing a rear wheel.
Just don't over tighten like I did on my second set of videos when I later replaced the bushes. The bush was in but I assumed it wasn't fully in for some reason. th-cam.com/users/shortsCOf9ogScTNA?feature=shares
Great video, I don't even have a Laguna but maybe the Megane is similar :D
Thank you for that comment. Same company at least.
On my est I have had to fit 4 sets the car has only done 107000 miles a very bad way to make a car
Did you fit original equipment parts as aftermarket may not last as long. I think they have gone again on my wife's car but we fitted aftermarket parts.
Great video but l using poliuretan silentblock is beter
Thank you I will look that name up now. I only used standard motor factor parts.
@@CoatsandGaiters laguna its realy great car. Two years ago l must change for a biger espace 4. Its olso like laguna. Back break front break and wery wery close.
Man zieht niemals die Stoßdämpfer aufgebockt an! Genau wie das Gehäuse vom Lager! Macht man alles wenn die Räder montiert sind.
Sonst gutes Video!
Thank you ............"You never put the shock absorbers on jacked up! Just like the housing from the camp! You do everything when the wheels are mounted. Otherwise good video! "
I know they are old cars now but I have done these twice and they have gone again it is disgusting Renault have never done a modification on these bushes as they are clearly made wrong and the failure rate unacceptable if this is Renault Engineering and customer care steer clear in future.
It's funny you say that as the original ones seem to last years but the replacements don't seem the same. Maybe the rubber has changed over the years and degrades quicker.
No need to pull the release cable 🤷🏻♂️
Sorry can you jog my memory on the cable you mean?
@@CoatsandGaiters the epb release (yellow T handle under the arm rest)
You can turn the ignition off then release the epb using the normal little lever. Then when you open the door. Electrics turn off and epb stays off too. 👌
@@MaNNeRz91 arrrr I understand now lol. Thank you for that, useful to know.
@@CoatsandGaiters not many people realise it and this causes them to prematurely pull the release cable which doesn't always reset itself. You can manually ram the cable (right side I believe) and click it back into the release mechanism inside the unit. People spend hundreds on having the unit repaired and it's as simple as pushing the cable 😆.
Nice video. Very clear. Good video quality. Clear voice over.
There is one remark.
I think that you should tighten the nut (with the bearing underneath it), and not the bolt head. This will give you a much higher tension in the bolt, at the same torque. I have the impression that the axle bush not not seated completely, because of this error.
I just saw that you do it in the right way here: th-cam.com/video/U63esUjKLYs/w-d-xo.html
Thank you, will look into that.
Renaults are like that. Good engines, crappy cars..
Somehow I missed your comment. Sorry. I think they have electrical gremlins but my wife loves Laguna's and to be honest they don't seem to rust and parts are cheap.