How to retrofit fullscreen AA and Carplay to Volvo Sensus |ISUDAR V2 Carplay Unit|Installation Video
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2024
- The ultimate upgrade half screen Carplay display to full screen for your Volvo Sensus screen! Keep your original car functions while upgrading to full-screen CarPlay and Android Auto.
Enjoy seamless integration with the original car audio, rearview camera, and microphone.
It's a plug-and-play installation that is easy to set up. Experience lightning-fast connection!
Attention!! The orange CAN cable shown in the video comes with our carplay kit. This cable must be connected! Otherwise, the screen will go black and no functions will be activated.
00:08-03:20 How to remove head unit
08:04-11:40 Locate and connect the original vehicle CAN line and module-configured CAN cable, tyou can find it under the passenger seat in some vehicles. If there are no CAN wires in that location, please connect to the CAN wire at any other available location. Make sure to connect the CAN-L wire to the Purple/Green wire and the CAN-H wire to the Purple/White wire.
11:41-13:36 There are two clips on the CAN harness that require pliers to be tightly secured.
03:21-16:42 Wire harness display, wires connection
15:27-16:41 How to hide the module box in the car
16:49-17:00 Display screen installation effect: Switching demonstration between OEM screen and CarPlay/Android Auto interface.
17:19-19:20 Restoring the disassembled components back to the original vehicle. Switching demonstration between OEM screen and CarPlay/Android Auto interface.
*NOTE: If you cannot find the CAN wire under the front of passenger seat, please search along the A-pillar or the side of the front passenger seat.
Feel free to reach out to us for further inquiries and detailed information.
→www.xyingly.com/products/isud...
→www.isudar.com/collections/wi... - ยานยนต์และพาหนะ
Could you please make a video showing how to install on an XC40?
I installed it in my S90 2017. It was difficult to get to the CAN wires under the seat. The wires are short and took me 1hr to get them properly connected. After quick setup like on the other video all the functions work. I used only CarPlay. Camera 360 work from CarPlay and in normal mode. It was worth to change it.
can you please do an install vid on xc40
Pleasw say that this is for v90/v60 beacuse that's what i have bought but no installation video?
Hi there, mine works great on a V60 (2019) although you have to take the trim off all the way along from the passengers vent.
It does come up with the outline round the buttons on CarPlay and sometimes selects things on its own do you know how to stop/disable this? It’s the outline round buttons that comes up when you would select something using a scroll wheel or something like that (when you don’t have a touch screen)
Hello, if convenient, please take a picture of the issue and send it to our WhatsApp. This will help us understand and respond to your query more quickly. +86 18127014080
When I switch gear from R to P or D, it shows front view, no video signal with black background for about 2 seconds. Is there any way to fix this?
Hello, regarding your question, please provide the order number and a video of the issue, and send them to our email cherie@isudar.com.
Do I have to connect the CAN wires or will it function without it? I saw another video where the CAN wires were left unconnected and this same device appears to be working fine. What are they needed for exactly? I checked the harness under the seat of my S90 2019 (manual seat) and the CAN-H + CAN-L are not there. I'm wondering if it's going to work at all or what potential problems should I expect if I don't connect the CAN wires?
Hello,
The new module requires the CAN wires to function. This allows the box to read more information from the original car, enhancing compatibility with the vehicle. For example, it supports steering wheel controls and original car audio. We have provided a harness for connecting the CAN wires, which can be clamped onto the car's CAN wires.
The old version did not connect to the CAN wires, so its sound quality and compatibility with the car were not as good as the new version. If the CAN wires are not connected, there will be no power supply, and the box will not be able to start.
Do you guys sell individual parts that comes with the Isudar wireless CarPlay box? The clips on the wires used to connect to the CAM wires under the seat broke. Thanks 🙏🏽
Hi, sure, we can send the clips separately, could you pls provide your shipping address to our email ? Kimi@isudar.com
Hello, and I have a question. Once installation is complete, will this interfere with the default manufacturing computer system features like the Safety systems like the collision avoidance detection systems? Thanks
Hello, the installation will not affect any of the original functions of your vehicle.
I have 2018 S90, I used the OBD2 for can cable hookup. The problem I have is black screen. Everything is hooked up the green light is flashing but no video. Any tips???
Hello, Please provide your order information and a video of the issue via WhatsApp at +86 18127014080, so we can respond to your query more quickly.
I have isntalled the Isudar v2 in my XC90 2016 and after the installation ally dashboard turn in to errors frpm sensor.
I think something with the Can Conelnector or VIDA
Hello, it may be related to the data reading of the connected CAN line. There are CAN lines in different locations on the car. It is recommended that you connect another setsof CAN lines. Here is the wiring manual for the Volvo module, please refer to it: drive.google.com/file/d/13yMYNfp2b6YxGAJT8pP4IVih-qojeXuK/view?usp=sharing
I installed in three different parts the CAN cable . Everytimr same error and bunch of alarma activated.
Need full refund on this . I won't put on my car , too risky
@@dariopppp Hello, please send the video and order number to our customer service staff. cherie@isudar.com
Thank you for your support and understanding.
I installed as your video shows, but when I park the car, turn it off and lock it, after a few minutes I see the sensus screen light up for a few minutes and then the car’s energy saving system shuts the screen off, then after a minute the screen lights up again, and it keeps repeating like that. The only way to stop it is to disconnect the orange CAN H & L wires when I park the car overnight because I imagine this will eventually drain the battery, but this is not practical, any ideas how to fix this problem?
Dear, if there is a power consumption issue caused by the continuous delivery of CAN signals to the module in certain car models, pls contact our customer service(WhatsApp at +86 18127014080) to obtain the upgrade file to resolve this problem. The upgrade file is currently being tested and will be released this week.
@@ISUDARCarNavigation I have the same issue on my 2019 V90, looking forward to the upgrade file being available.
Hello, this issue can be resolved. The upgrade file is expected to be released later this week.
@@imtim2496
@@ISUDARCarNavigation That will be great, please let us know when you have the upgrade file ready!
I have a Volvo s60. I connected it after purchasing the product, but the screen doesn't come out. I didn't connect the reverse light (CAN), but would that affect the screen?
Do I have to connect all the CAN lines to output the Volvo screen normall
Dear, thank you for your message. The CAN cable must be connected, otherwise the screen will not turn on. If you have any further questions, please feel free to contact us via WhatsApp at +86 18127014080
@@ISUDARCarNavigation Thank you for your quick response, the problem has been solved.
You're welcome! I'm glad to hear that the problem has been solved! @@jae-myungshin7741
@@jae-myungshin7741 Hi, where did you connect CAN wires? Do you have them under passenger seat. I dont have them there so I have to find CAN wires somwhere else..
does it work for xc90 2018 in us
Hi, yes, it works with XC90 2018 !
The OEM USBs in the storage compartment are inhibited?
Hi, The car's USB functions normally on the OEM car screen.
Is the installation method of s60 the same?
Yes, the connection methods are similar.
Hi , is this module valid for an XC60 from 2018?
Hi, yes, it is suitable for XC60 2018.
支持 2016 年的 XC90 吗?
可以的
我是去年买的老款的模块是不是就没法实现现在的界面了?
您好,是的,新版在硬件和软件都做了升级,实现了旧版支持不了的界面。
Is this for v60/v90?
Hi, it would be suitable for V60/V90
I have yellow white and purple in my xc40 can you help me ?
Dear, here is user manual: drive.google.com/file/d/13yMYNfp2b6YxGAJT8pP4IVih-qojeXuK/view?usp=sharing
Did you figure out the correct installation?
@@MashNTx yes yes I attached the power cables along the passenger side door sill
@@edoardoc.9217 Thank you!
@11:24 I have the XC40 and my wire colors don't match this. I have:
1. White/Green
2. Blue
3. Purple/Grey-lightblue
4. White/Yellow
5. Black
6. Yellow/Purple
7. Grey-lightblue/Yellow
8. Green
9. Brown
10. Orange
Anyone else experience this?
@ISUDARCarNavigation Man I'm really frustrated. I reached out to them before the Chinese New Year holiday and they told me the wiring will be the same in the XC40 as it is in the XC90. It's definitely not. I couldn't find the Canbus under the passenger seat. Finally found the "purple/white and purple/green" wires in the passenger door floor trim - hooked up to those and no luck. Found more "purple/white and purple/green" wires in the passenger foot well and hooked up to those and no luck. Found the "purple/white and purple/green" wires in the driver door floor trim - hooked up to those and no luck. I can't get the device to power on, it's getting really frustrating. To advertise a product for multiple vehicles as if they're all built exactly the same and then provide install instructions for only one model. To top it off, they're closed until Feb 19 :( Okay first world problems I know, but still a little frustrated.
Hello, Happy Chinese New Year! We apologize for the delayed response due to the holiday season and lack of staff on duty. If you cannot find the CAN line under the passenger seat, you can check behind the OBD port or search along the A-pillar and the side of the front passenger seat. User manual: drive.google.com/file/d/13yMYNfp2b6YxGAJT8pP4IVih-qojeXuK/view?usp=sharing
@@procom808 Hello have you found a solution yet? I have the same issue :S
@@danielh4193 flip the can wires - they were mislabeled for me.
@@procom808 sorry I don’t get it. Have you attached the can-h and can-l under the seat just on different colors?