Tip for future wiring… When you have to solder multiple wires, it’s always better to stagger your cuts and solders, that way you don’t end up with a big knot in one area where all your connections are soldered together.. Helps a lot with clean wiring especially when you wanna actually loom everything up nice and neat.
New subscriber….. I recently purchased a new 2022 Tacoma off road. I came across your channel and I can’t get enough. I’m up till 2am watching your channel and I’m making a list of future mods. Watching your videos have encouraged me to do many of the mods myself. Thanks and keep up the great videos!!!!
After watching the R4T video on this camera install, I ran into a few snags (newbie with wiring and Tacoma’s and not to fault their vid). Watched yours and got everything successfully connected and working great! I appreciate your content so much and am slowly building my “new” 2020 off-road
Your wiring diagram saved me a bunch of time, I was watching a video for the install that was for a 2020 not the 2019, totally different wiring process. Your video made the process all make sense. The Anytime camera install video on TH-cam neglected to say it was for a 2020 and up 🤯. I am all soldered up and ready for the install. Thanx for the great video.
Good video Chloe I always learn something new about trucks watching your channel very informative 💯💪🏾 and your truck looks amazing keep up the good content Chloe 💪🏾💯😊
I’ve had my Taco for about three weeks and have decided that this is really needed. I just ordered mine. Too bad the rear camera doesn’t have dynamic lines. Those would be nice. Thanks Chloe.
Got mine alast year too...since we had a lot of rain up here in norcal it has a little moisture inside the lens..I recommend putting silicone where the wire enters the camera to seal it from water
Great video Chloe (again!). Every DIYer makes little mistakes and learns from them each time. Nice to see you share the “true” experience and not try to edit anything out 😊 Also, hope your dog is doing OK. Always appreciate those cameos… 🐕
Great video. I did the same install with the same grill. I was scared but I drilled a hole right under the emblem so I can screw the camera into the grill. A little risky but a much cleaner/OEM look. If you want to try it I have an extra grill if you need 😆
👍 thanks for all your videos. Just got my 2018 trd off road tacoma and been learning a lot from you. Glad the google algorithm had you pop up on my feed haha. I live in San Diego as well and was wondering if you can maybe do a video on beginner trails? My suspension and tires are still stock but I’m itching to go out. Thanks again, maybe one day I can hit the trails with you and your buddies.
When I align the camera male threads to the toyo emblem on the OE grille, it appears a portion of the camera base protrudes beyond the flat portion of the emblem. That doesn’t look factory! Did you do any other positioning?
So I watched both your video, and R4T’s video, and I noticed you hooked up the power wire out at the fuse by the battery, but the didn’t seem to hook it up. They did cut the wire, and said they didn’t need it. Is it necessary to install those power wires, or not?
I installed this same camera system last week! awesome video! I have my switch located in the center console so I don't have to reach all the way to the left side and look at the monitor on the right.
Hi Chloe - love your channel. Why did you power the camera through the fuse block versus using the power from the positive wire coming from the male RCA connector from the camera feed? I see in your diagram that you terminated this wire. I just installed my anytime camera and I terminated the positive wire that you connected to the fuse block and I used the positive wire from the male RCA connector from the camera and soldered that to the positive wires (green) from the switch and relay. I am having issues with my front camera intermittently giving me a black screen and am wondering if this could be the issue or if there is a bad connection elsewhere.
Greetings Chloe! Your channel has been very aspiring and fun. I recently purchased the Anytime Camera from R4T… for my 2019 TRD Taco. I’ve tried to figure out why the camera switch doesn’t light up at night while all my instruments lights do? did I wired it wrong? Please let me know. Other than that, front and back amber lights light up ok on the switch. Thank you so much for your support!
Thanks for the informative video, I've been wanting a front-up camera for solo plow mounting forever now. R4T shipped fast and love the product. The only problem I had was with the video on the front camera not working/being intermittent, turns out it was an issue with the insulation inside the heatshrink on the back side of the relay. Probably an issue when the soldered the screens together and overheated the center conductor/insulation - one of the joys of working with screened cable. Otherwise a great kit, and easy install (except for getting through the bulkhead!)
Hi, love your installation vids. Is your rear camera came factory with your truck or did you added secondary camera to it? So the rear ( switch+relay ) is over riding your factory rear camera, making it manual correct? Instead of putting in reverse.
Will there be a future video for hood strut install? I don’t know how you’ve gone this long with your taco without it. I got a kit installed right after I got my taco
Great job 👍🏻👍🏻👍🏻👍🏻 Question: I don’t understand when you said you looped or cut the white wire on the any time camera 27:54? Can you clarify that for me. I must have missed something as I didn’t understand why you would cut some wires there. I may have misunderstood. Thanks.
I bought this same camera setup but have yet to install it. Great video with detailed instructions, as always, Chloe. Is that the Factory Tacoma low profile bumper from 4WP? Looks just like it. I ordered mine on August 3rd and it just arrived. It's getting installed on my '19 SR5 Tuesday along with a pair of 2" cube lights and a 20" light bar. What do you think of the bumper?
Chloe, thanks for another great video. I'm not sure I want to do the install myself. Do you know a good installation company in North County San Diego that could do the install for me?
I know there's some good wiring tips in the comments like staggering your solders, really good advice. I know you're an electrical engineer but something I've noticed personally and through other people is soldering is not great for use in vehicles. It'll work, dont get me wrong but there's a reason you won't find solder connections in a factory harness. They can heat up or degrade over time in a vehicle and then you're left with wire pulling against itself, coming apart, difficult to track down draws on your battery, normal gremlins. I used to solder everything but after seeing a few of the joints coming apart and spending way too much time hunting a draw in my brother in-laws XJ I switched over to deutsch connectors and bulkhead fittings. Weather pack connectors also work great. It's super clean and they're not expensive. You can also pick up OEM connectors for making jumper harnesses. Its all weather tight and unless you get violently angry and pull on them as hard as you can they'll last as long as the rest if your harness. Love your videos. I'm catching up on all of em 😊
Interesting to note the difference in resolution. The front looking much crisper and clearer. I’m wondering if you could simply replace the rear camera as well? Maybe you could simply cut the wires near the rear camera and splice a new one in?
Great video. altho im a ford guy... but still i like the content you put out. its very indepth and its good clean stuff. and you make it seem very realistic. alot of folks just start it then you see when its done and id rather see the middle stages or "boring part" as other say thats were the excitment is i think!
Another great video. I've referenced you for so many of my mods. I have so many questions about this product. I have the BeatSonic product, and is good in some ways, and leaves something to be desired in others. I am looking at your system as an option, or considering rewiring to do some hybrid of the two. 1. Just to confirm, if you put the front camera on, and then put the vehicle in reverse, the screen doesn't automatically switch to the reverse camera? My BeatSonic does. It makes parallel parking super easy and the cameras are convenient to use for that. This is the only strength of the BeatSonic...see my following questions. 2. Does your navigation still continue to work when you have either camera buttons pressed? My navigation is disabled when I do on the BeatSonic. It takes a while for the Navigation to catch up and figure out where I am, once I turn the camera off. 3. When you unplug your positive battery terminal or completely unplug the head unit, does it take about 60 miles of driving for your camera button and reverse camera to be recognized and work again? My BeatSonic does, but I'm not sure if that would happen with the normal reverse camera anyway. Thanks!
What's even better is having an aftermarket hu that supports multiple cameras. They can be always on. Don't understand why Toyota didn't have a "cargo" cam built into the 3rd brake cab light.
Hi, I know this is an old video... I'm thinking about putting one in, but saw some forum discussions on cameras going blank or building up condensation under heat/water stress. Have you experienced these things on your camera? I don't want to go through all that work just to have both cameras go out eventually... your observations?
Chloe, how's the camera holding up so far? I'm in Southern CA like you, wanted to get some reliability data before I begin the process on my 3rd gen... any blackout or other issues? Thank you!!
It really is a cool modification unfortunately I can’t put it on my truck because it’s already there it came with my truck my truck came with a camera at the front the back and on the wing mirror so I can see the sights I have to say I really do love this feature allows me to see around my truck I do wish however that the resolution was a lot better I think this much room for improvement in this regard.
@@ChloeKuo yes that's something I would be very interested in but I would want the system where it works from back on each side I like the idea of the 360° view
HA!! Viewed this at 2000 Texas time and they R4T were already sold out. Hope that you are getting a commission. Oh well, I'll wait. Thanks for all the work teaching us oldsters how to upgrade out Taco18's.
Did mine on the 2021 and it’s even cleaner than on a 2019 since you don’t need an add a fuse. And don’t do it with the pro grill. It sticks out and looks dumb the off-road grill is better. They have 20% off rn I think too
@@chuyhdz3082 pretty sure it pulls power from the entertainment center whereas in the older Tacomas it pulls it from an add a fuse. Not sure why there’s a difference there but I know the entertainment center is updated in the 2020+
you can skip the fuse box add a circuit by soldering your power and ground into the cigarette lighter circuit. its switched power and right under the radio. so less mess under the hood
Nice video, very informative. Too bad (for me) that the camera is sold out - bummer. I was thinking about connecting my dash camera video to the head unit but they use a different format, so much for that idea.
Cool idea, but sadly like so many of these companies in your vids you get on their sites it's "sold out"...hopefully these companies get a handle on this problem so we can get these cool things!
I dont know if this is a dumb question or not but, with this mod will the front and/or rear camera show on the screen while driving (not just in park or reverse)?
I ordered this over a month ago! Still has yet to ship because they’re so back-ordered. How the heck did Chloe get one - using that TH-cam status! 😆 Very cool mod - waiting patiently….. 🙃
Hi Chloe, I have a 21’ taco with a stock front camera… my question is will the premium camera hook up to the existing camera connectors That already came with my truck? The stock camera is really bad!! The camera that comes with the kit you installed is so much better. I’ve been searching but haven’t found any info on my question. Thanks in advance and keep up the good work.
Hello, I installed the front camara and I am having issues with the RCA cables. When I press 'Front' or 'Back' it is showing only the rear camara for both switches. My current wire set up is: Male Front Camara RCA connected to female RCA (1) on switch (not marked) 24 Pin Male RCA connected to female (2) RCA on Switch (marked) Male RCA on switch connected to 24 Pin Female I have tried multiple configurations and I have only been able to either get the switch to display both options on the front camara or the rear. Please help :)
As of 5/14/2023 - I have a 4ch but for right now I'm doing a 3ch - back - and both sides for now. All cameras are hidden, just a normal looking car driving by.
Hello Khloe, nice job! Do you or anyone know if this install has something to do with my DRL not working? When I turn my drl on, they won’t turn on. They will only turn on on the second click and third click when my low beam are ON… Please someone help!
@@ChloeKuo pioneer wt7600-NEX or 8600 also the kenwood is good but hard to find right now but it has volume knob which other done. These are floating screen so depends on what you like.I have one in a tundra.
Tip for future wiring… When you have to solder multiple wires, it’s always better to stagger your cuts and solders, that way you don’t end up with a big knot in one area where all your connections are soldered together.. Helps a lot with clean wiring especially when you wanna actually loom everything up nice and neat.
This^
Awesome advice
New subscriber….. I recently purchased a new 2022 Tacoma off road. I came across your channel and I can’t get enough. I’m up till 2am watching your channel and I’m making a list of future mods. Watching your videos have encouraged me to do many of the mods myself. Thanks and keep up the great videos!!!!
Means a lot-thanks 😊 congrats on your new Tacoma!
Been thinking about adding one to my Taco! Will definitely use this as reference when I get one and need to install it!
After watching the R4T video on this camera install, I ran into a few snags (newbie with wiring and Tacoma’s and not to fault their vid). Watched yours and got everything successfully connected and working great! I appreciate your content so much and am slowly building my “new” 2020 off-road
Your wiring diagram saved me a bunch of time, I was watching a video for the install that was for a 2020 not the 2019, totally different wiring process. Your video made the process all make sense. The Anytime camera install video on TH-cam neglected to say it was for a 2020 and up 🤯. I am all soldered up and ready for the install. Thanx for the great video.
Cool! So I don’t need to use the blue and grey wires! I have everything wired and was lost when it came to those.
Was looking at front cameras last week. Thanks for the video
Good video Chloe I always learn something new about trucks watching your channel very informative 💯💪🏾 and your truck looks amazing keep up the good content Chloe 💪🏾💯😊
I’ve had my Taco for about three weeks and have decided that this is really needed. I just ordered mine. Too bad the rear camera doesn’t have dynamic lines. Those would be nice. Thanks Chloe.
Got mine a year ago for my 2019 TRD Off Road, love it, very useful for front parking and hitting the trail
Got mine alast year too...since we had a lot of rain up here in norcal it has a little moisture inside the lens..I recommend putting silicone where the wire enters the camera to seal it from water
Thanks for the tip-I’ll definitely have to do this!
Once again you are amazing great job, I just finally been able to order my MESO stage 1 tail lights can’t wait for them to come thanks for the videos
You do a super job explaining in detail how to do this (like all your videos). I'm going to do this on my Taco, thanks for the information!
Great video Chloe (again!). Every DIYer makes little mistakes and learns from them each time. Nice to see you share the “true” experience and not try to edit anything out 😊 Also, hope your dog is doing OK. Always appreciate those cameos… 🐕
that definitely my next mod for sure! it really comes in handy on those trails!
Wow the quality of that front camera looks miles better than the rear toyota OEM one, merry Christmas BTW 🎅 🎄 love your videos
Great video. I did the same install with the same grill. I was scared but I drilled a hole right under the emblem so I can screw the camera into the grill. A little risky but a much cleaner/OEM look. If you want to try it I have an extra grill if you need 😆
I just ended up drilling a hole under the emblem and it’s much better! Thank you for the advice 😊
👍 thanks for all your videos. Just got my 2018 trd off road tacoma and been learning a lot from you. Glad the google algorithm had you pop up on my feed haha. I live in San Diego as well and was wondering if you can maybe do a video on beginner trails? My suspension and tires are still stock but I’m itching to go out. Thanks again, maybe one day I can hit the trails with you and your buddies.
When I align the camera male threads to the toyo emblem on the OE grille, it appears a portion of the camera base protrudes beyond the flat portion of the emblem. That doesn’t look factory! Did you do any other positioning?
i wish you owned a 3rd gen tundra your videos are really detailed some of the best ive seen!
Nice job on the install as always!! Front camera looks awesome too, need to pick one up
So I watched both your video, and R4T’s video, and I noticed you hooked up the power wire out at the fuse by the battery, but the didn’t seem to hook it up. They did cut the wire, and said they didn’t need it. Is it necessary to install those power wires, or not?
I installed this same camera system last week! awesome video! I have my switch located in the center console so I don't have to reach all the way to the left side and look at the monitor on the right.
Super clear walk-through, thanks!
Hi Chloe - love your channel. Why did you power the camera through the fuse block versus using the power from the positive wire coming from the male RCA connector from the camera feed? I see in your diagram that you terminated this wire. I just installed my anytime camera and I terminated the positive wire that you connected to the fuse block and I used the positive wire from the male RCA connector from the camera and soldered that to the positive wires (green) from the switch and relay. I am having issues with my front camera intermittently giving me a black screen and am wondering if this could be the issue or if there is a bad connection elsewhere.
Really enjoyed the long form video on this! Definitely considering giving it a go!
@5:43 I DIED when she said what she wanted to do to the taco! X_ X
What if Our Tacos are ALIVE and Feel pain... you still wanna drill in it!? OOFfff
Chloe you're amazing , I don't think that I would have done that job.The video was very informative and interesting to watch 🤠👍
I have been told to connect the 10amp fuses to EFI #4 instead of 1 EFI#1 is constant power and the camera will get hot and possible overheat.
Def need one of these. When you get to the top of a hill on the dirt roads and you dont know if the road keeps going down straight, left, or right
Great video! How many feet of extra wire did you use for the switch?
Just subscribed! Awesome channel…
Greetings Chloe!
Your channel has been very aspiring and fun. I recently purchased the Anytime Camera from R4T… for my 2019 TRD Taco.
I’ve tried to figure out why the camera switch doesn’t light up at night while all my instruments lights do? did I wired it wrong? Please let me know. Other than that,
front and back amber lights light up ok on the switch. Thank you so much for your support!
Front camera should be standard on all Tacoma trucks. Great video.
Nice video! Can’t wait until you get your fuse block and record a video! I need a fuse block on my taco as well.
22:37 you will notice a rubber plug at about 11 o'clock from her red wire. That is a half inch hole. The firewall insulation on the inside covers it.
Thanks for the informative video, I've been wanting a front-up camera for solo plow mounting forever now. R4T shipped fast and love the product. The only problem I had was with the video on the front camera not working/being intermittent, turns out it was an issue with the insulation inside the heatshrink on the back side of the relay. Probably an issue when the soldered the screens together and overheated the center conductor/insulation - one of the joys of working with screened cable. Otherwise a great kit, and easy install (except for getting through the bulkhead!)
Hi,
love your installation vids. Is your rear camera came factory with your truck or did you added secondary camera to it? So the rear ( switch+relay ) is over riding your factory rear camera, making it manual correct? Instead of putting in reverse.
Happy New Year Chloe !!!! Ilove the mods you've done on that truck. Are you doing this in your home garage ?
Any Help from Boyfriend or Dad ?
I just love her. She’s so amazing, smart, capable and so dang beautiful. Amazing partner material
I agree, seen her grow in the last couple years, such a attractive young lady with a great personality.
You guys are creepy.
@@sugaronyourface you’re mom didn’t think so
I got to give it up to her, I think this is the best cheat sheet video for this install. Made me forget she's a cutie.lol😂
Will there be a future video for hood strut install? I don’t know how you’ve gone this long with your taco without it. I got a kit installed right after I got my taco
Yes! I actually have a set sitting in my garage from TacomaBeast that I will be installing
What did you do with the green wire coming out of the rca from the camera?
Great job 👍🏻👍🏻👍🏻👍🏻
Question: I don’t understand when you said you looped or cut the white wire on the any time camera 27:54?
Can you clarify that for me. I must have missed something as I didn’t understand why you would cut some wires there. I may have misunderstood. Thanks.
Incredibly helpful. Thank you.
Looks fantastic! Thanks for the video! I’ll checkout for my 4Runner.
27:36 when all else fails zip ties!
I bought this same camera setup but have yet to install it. Great video with detailed instructions, as always, Chloe. Is that the Factory Tacoma low profile bumper from 4WP? Looks just like it. I ordered mine on August 3rd and it just arrived. It's getting installed on my '19 SR5 Tuesday along with a pair of 2" cube lights and a 20" light bar. What do you think of the bumper?
Chloe, thanks for another great video. I'm not sure I want to do the install myself. Do you know a good installation company in North County San Diego that could do the install for me?
Where did you get the bull bar at?
Thanks
I know there's some good wiring tips in the comments like staggering your solders, really good advice. I know you're an electrical engineer but something I've noticed personally and through other people is soldering is not great for use in vehicles. It'll work, dont get me wrong but there's a reason you won't find solder connections in a factory harness. They can heat up or degrade over time in a vehicle and then you're left with wire pulling against itself, coming apart, difficult to track down draws on your battery, normal gremlins. I used to solder everything but after seeing a few of the joints coming apart and spending way too much time hunting a draw in my brother in-laws XJ I switched over to deutsch connectors and bulkhead fittings. Weather pack connectors also work great. It's super clean and they're not expensive. You can also pick up OEM connectors for making jumper harnesses. Its all weather tight and unless you get violently angry and pull on them as hard as you can they'll last as long as the rest if your harness. Love your videos. I'm catching up on all of em 😊
Interesting to note the difference in resolution. The front looking much crisper and clearer. I’m wondering if you could simply replace the rear camera as well? Maybe you could simply cut the wires near the rear camera and splice a new one in?
Thanks great video Chloe you know your electrics just brilliant and the diagram on computer your an all rounder.✔
Great video. altho im a ford guy... but still i like the content you put out. its very indepth and its good clean stuff. and you make it seem very realistic. alot of folks just start it then you see when its done and id rather see the middle stages or "boring part" as other say thats were the excitment is i think!
Well done! Considering something similar for our TR4
Awesome video Chloe! Ordering mine soon.
Another great video. I've referenced you for so many of my mods. I have so many questions about this product. I have the BeatSonic product, and is good in some ways, and leaves something to be desired in others. I am looking at your system as an option, or considering rewiring to do some hybrid of the two.
1. Just to confirm, if you put the front camera on, and then put the vehicle in reverse, the screen doesn't automatically switch to the reverse camera? My BeatSonic does. It makes parallel parking super easy and the cameras are convenient to use for that. This is the only strength of the BeatSonic...see my following questions.
2. Does your navigation still continue to work when you have either camera buttons pressed? My navigation is disabled when I do on the BeatSonic. It takes a while for the Navigation to catch up and figure out where I am, once I turn the camera off.
3. When you unplug your positive battery terminal or completely unplug the head unit, does it take about 60 miles of driving for your camera button and reverse camera to be recognized and work again? My BeatSonic does, but I'm not sure if that would happen with the normal reverse camera anyway.
Thanks!
What's up CK And Family Great Video As Always Happy Holidays CK ❤ 🙏
Back at you CK ❤
Thanks for video. I just received mine from r4t. How much longer would you suggest making the wires?
Chloe, are you still using the adhesive or did you decide to secure the camera another way?
What's even better is having an aftermarket hu that supports multiple cameras. They can be always on. Don't understand why Toyota didn't have a "cargo" cam built into the 3rd brake cab light.
Love your vids. Great work!
Hi, I know this is an old video... I'm thinking about putting one in, but saw some forum discussions on cameras going blank or building up condensation under heat/water stress. Have you experienced these things on your camera? I don't want to go through all that work just to have both cameras go out eventually... your observations?
Chloe, how's the camera holding up so far? I'm in Southern CA like you, wanted to get some reliability data before I begin the process on my 3rd gen... any blackout or other issues? Thank you!!
Hi, it’s been fantastic! I can’t think of a single issue and it’s honestly worked perfectly every single time
I would love to add this but they are out of stock! Great video as always.
It really is a cool modification unfortunately I can’t put it on my truck because it’s already there it came with my truck my truck came with a camera at the front the back and on the wing mirror so I can see the sights I have to say I really do love this feature allows me to see around my truck I do wish however that the resolution was a lot better I think this much room for improvement in this regard.
I wonder if you can swap the front camera for one with better quality?
@@ChloeKuo yes that's something I would be very interested in but I would want the system where it works from back on each side I like the idea of the 360° view
HA!! Viewed this at 2000 Texas time and they R4T were already sold out. Hope that you are getting a commission. Oh well, I'll wait. Thanks for all the work teaching us oldsters how to upgrade out Taco18's.
Like the change in pants.
Quick question where did u get those floor mats they are really nice?!
Nice job as usual.
Was it plug ad play with the New Stinger stereo or did you have to Re Wire ? I have my stinger stereo coming In.
whoa very cool, that'll be useful for parking
Looks a little weird with the guidelines pointing upwards, but thanks, it's good to know a camera can be added because my 2021 Sport doesn't have one.
Did mine on the 2021 and it’s even cleaner than on a 2019 since you don’t need an add a fuse. And don’t do it with the pro grill. It sticks out and looks dumb the off-road grill is better. They have 20% off rn I think too
Can you explain about the not having to add a fuse ?
@@chuyhdz3082 pretty sure it pulls power from the entertainment center whereas in the older Tacomas it pulls it from an add a fuse. Not sure why there’s a difference there but I know the entertainment center is updated in the 2020+
@@alexs825 👍
you can skip the fuse box add a circuit by soldering your power and ground into the cigarette lighter circuit. its switched power and right under the radio. so less mess under the hood
How about route ya a hole in 1 of the Toyota logo loops in grille? . prolly how I’ll do mine if grill will allow.
Very nice, greetings from Greece !
Nice video, very informative. Too bad (for me) that the camera is sold out - bummer. I was thinking about connecting my dash camera video to the head unit but they use a different format, so much for that idea.
Cool idea, but sadly like so many of these companies in your vids you get on their sites it's "sold out"...hopefully these companies get a handle on this problem so we can get these cool things!
I dont know if this is a dumb question or not but, with this mod will the front and/or rear camera show on the screen while driving (not just in park or reverse)?
I ordered this over a month ago! Still has yet to ship because they’re so back-ordered. How the heck did Chloe get one - using that TH-cam status! 😆 Very cool mod - waiting patiently….. 🙃
Why didn't you use the blue and grey wires? My switch harness came with 2 grey wires...😐
Hi Chloe, I have a 21’ taco with a stock front camera… my question is will the premium camera hook up to the existing camera connectors That already came with my truck? The stock camera is really bad!! The camera that comes with the kit you installed is so much better. I’ve been searching but haven’t found any info on my question. Thanks in advance and keep up the good work.
I’m not sure, I’d have to look at the connector on the stock camera but my guess would be no. You could probably do some splicing to get it to work
@@ChloeKuo didn’t think about splicing. I’ll just keep investigating before I go down that route lol thank you
Hello, I installed the front camara and I am having issues with the RCA cables. When I press 'Front' or 'Back' it is showing only the rear camara for both switches.
My current wire set up is:
Male Front Camara RCA connected to female RCA (1) on switch (not marked)
24 Pin Male RCA connected to female (2) RCA on Switch (marked)
Male RCA on switch connected to 24 Pin Female
I have tried multiple configurations and I have only been able to either get the switch to display both options on the front camara or the rear.
Please help :)
♥♥♥ Amazing Just love the way you do things.
Does that work for aftermarket radio which I already did but the replacement needs replaced. Doing everything at once
Nice for hitting those trails at night.
where do you buy the Side Switch Panel and Camera Switch ?
would the top end trim have 360 view?
Tacomas that come stock with front cameras also have side cameras that make up a 360 view
As of 5/14/2023 - I have a 4ch but for right now I'm doing a 3ch - back - and both sides for now.
All cameras are hidden, just a normal looking car driving by.
Hello Khloe, nice job!
Do you or anyone know if this install has something to do with my DRL not working?
When I turn my drl on, they won’t turn on. They will only turn on on the second click and third click when my low beam are ON…
Please someone help!
I would suggest you disconnect the battery to keep from shorting something out while running wires. Great tutorial though. Thanks.
Does this switch still work with the new stinger screen you put in?
Seriously Chloe, your channel is going to make me not wait for a gen 6 and just pull the trigger now and make the switch from 4runner to Taco....
😅😁
I had the same problem with the RCA cables
It Pretty Cool For Front Camera!
@chloekuo please do a video about blind side camera installation
Great Great stuff! Thank you.
Best place to purchase this is Anytime, they wire everything for you.
Does this work with the JBL system?
In for...probably not
Not a electrician but mixing gauges is messing with resistance and out put. Correct me if I’m wrong but I don’t think that’s recommended.
You really need a aftermarket headunit night and day.
What do you recommend?
@@ChloeKuo pioneer wt7600-NEX or 8600 also the kenwood is good but hard to find right now but it has volume knob which other done. These are floating screen so depends on what you like.I have one in a tundra.