Star Trek USS-Enterprise NCC-1701-A
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- STL- fab365.net/ite...
Support me. / goodesign
For classic science fiction fans, we created the USS-Enterprise NCC-1701-A from Star trek.
This is the second Enterprise built to replace its destroyed predecessor.
A feature of this design is that part of the exterior can be clipped on to increase sturdiness during assembly.
Other than that, the method of making it is very simple.
There is no difference in the size of the letters, so you can paste them according to the letters.
The use of adhesive is recommended throughout.
This spaceship is difficult to stand without a display stand. So, we have also released a display stand, so please take note of this.
We hope to receive a lot of response from classic SF fans.
1 : 1000 scale
Largest part in printing, size = X 143mm, Y 124mm, Z 77mm, After full assembly size= X 143mm, Y 305mm, Z 73mm
Total Build Time : 33h 40m / Plastic Weight : 138g
The most beautiful starship design of any sci-fi universe.
I think so. Thanks for watching and please enjoy~
Looks good from any angle.
One of...
Still my all-time favorite spaceship design of any sci-fi franchise, the Enterprise refit. I'm in awe of it every time.
Thanks for watching and comment!
Please look forward to next starships from Star trek.
During the 70’s and 80’s there was “Snap Together” kits. Pre made kit parts for younger kids; because some glues were “toxic” because of the fumes. This is a neat cute snap kit! Coool!
this deserves the "Leaving Spacedock" music sequence!
No hay nave estelar mas bella que está uss enterprise
The refit enterprise is THE most elegant starship in all of trek history. I’m glad they didn’t use it in TNG like they did the other TOS-era movie ships.
They only did that with a few ships. The Excelsior Class had a long run. The Ambassador Class not so much. The stupid Oberth was around for a long time. So was the Miranda. Although the Nebula was quickly phasing it out of service.
I personally would like to see the refit on screen again. Might bring a tear to my eye.
@@bradleyj.fortner2203 The Oberth was a science, and medical ship. When Picard and crew abandoned the old Stargazer, they lived in shuttles for weeks until an Oberth class ship rescued them.
A 3-D printed model of the Starship Enterprise - A. Nice.
Thanks for watching! Please enjoy~
Ingenious model chum so well designed 😍
Thanks for watching! Please enjoy~~~
Gorgeous model. Brilliant design as well!
Thank you~ Please enjoy~
You would make a mint selling that as a snap together kit!!!!
Wow! Great design, loved how the parts snapped in place!
Thank you for watching and comment! Please enjoy~
@@GOODesignlabs what an amazing "3-D Print file" , 👍 hey is there a compatible scale print file for the "Galaxy Class Enterprise D" ?????
Nice! Now ya gotta do the OG and Refit along with B-E
I absolutely love this!😊☄️🌒🌚🌠🛰️🛸
Thank you for your comment! Please enjoy~
🖖😎👍Very cool and very nicely greatly spectacularly well done and I really truly liked how everything just snapped right into place, A job very nicely wonderfully well done indeed Sir!👌.
Thank you very much for your watching and comment! Please enjoy!
Nice, it’s a 3D printed snap tight model.
Indeed it is! Thanks for watching! 😁
This is great! I used to have a larger plastic model, but the warp nacelle pylons kept breaking off before I finished detailing the rest of the ship. Now we just need a 3d printed one this size with tiny LED lights inside of it, which are powered by a rechargable battery with concealed usb port inside the shuttle bay.
Pretty slick design. Thanks
Glad you like it! Please enjoy~
Are you selling these?
This is awesome! Should do a series of all the ships thru G!
So well engineered.... amazing!!!
Thank you so much! Please enjoy~
Very clever
Thank you! Please enjoy my clever design~ 😁
How many brilliant solutions in your projects 👏
Thank you~ Please enjoy my design solutions~ 😁
Enterprise E! Make it so!
Omg YES!
I am amazed you were able to print the legs of the nacelles without support!
Thanks! You can enjoy that structure!
Man if I’d had a printer as a kid I’d have done so many Star Wars toys😂
Other than the fact that you need a stand and maybe some detailing this needs to be manufactured for retail. I would definitely purchase this. You did a fantastic job. Now following.
Looks great but for can you remove the "good design" from the bottom of the saucer section? I don't really want to pay for a model that's stamped with a logo on it.
Edit: Also, since you're charging for it, do you have license to sell this? Or is putting your logo on it your way to help avoid that?
THIS IS SUPER COOOOOL!!!! THANK YOU, VERY MUCH!!!!!!!❤😂👍🫶🤙🙏🤎🛸🚀🛰🚀🛸🛸🛸🛰🛰🚀
You are welcome! Please enjoy~ 😆
@@GOODesignlabs "PLEASE"!!!!!! MORE!!!!! THANK YOU!!!!!🫶🙏👍🤙😂🤎🛸🚀🛰🤖
Great job 👏👏
Thank you! 😃
Would LOVE to see the Excelsior and the Reliant. Also, instead of putting your logo "GooDesign" on the underside of the saucer, is it possible you could put it somewhere that doesn't stand out so much, or at least make it smaller, please? I'm just asking on the chance that we might want to paint and decal the model....
Better than AMT Model Kit in the 60s
Thanks for watching and comment~ Please enjoy~
I would definitely purchase one of these, you should make and sell them ….
I will consider your idea. But how can I ship to all over the countries?
It's not just a spaceship. It's a transformer
That’s what I do. Thanks for watching~
She's my favorite
Thanks for watching! Please enjoy~
Awesome
Thanks for watching~ Please enjoy~
Well done!! ❤
Thanks for watching! Please enjoy~
Eu quero uma dessas 😍😁😁😁
It’s time to buy a 3D printer~
That's adorable!
Thank you~ Please enjoy~
What's the point of the last piece? Why didn't you just model that into the piece?
Outstanding ❤
Thank you~ Please enjoy!
Just awesome!!’
Glad you like it! Please enjoy~
Been building models since the 60's. I'm 70. I still build kits, filing, sanding, filling, sanding. Then the painting. To me maybe a couple of quick fills, prime, paint, detail paint. DONE. Guess it is time for me to by a high end 3-d printer and throw all the other stuff away.
NOT.
I absolutely love this. Are there any other models of the other starships available?
Not yet! But I have plans for more startrek ships. Please look forward to them.
She's a beauty!
Thank you~ Please enjoy her beauty~ 😁
We have arrived onto the future. Beautiful. Such a great product. What scale?
Very nice 👍
Thank you! Cheers!
Awww man, this makes me want to get a 3D printer sooooo bad! I’m subbing to keep an eye on what you come up with next!
Thank you for watching and comment! I will do my best. I think you should but 3D printer~ 😉
Such clever design! ❤
Thank you! 😊 Please enjoy~
Uhh we need ALL the Enterprises A to D at least, E would be awesome!
I'm assuming that's a 3D print (I don't have any experience with 3D printers)? If so, then why not print a larger model by designing a lot more smaller pieces that can be assembled into a larger model? That's what I would do. But what the heck do I know? Except that it already looks really good as a smaller model.
BUT... Is clear resin a thing? Because I think it would be super awesome to print the sides of the nacelles, along with the deflector dish, using clear blue resin and installing some LEDs and/or fiber optics to make those areas glow - and also the arboretum windows. And while you're at it, why not print lots and LOTS of transparent resin pieces for the dozens of windows?
Anyway. That's my 2 bits.
Now it needs detaling !
Do you want more details? 😅
@@GOODesignlabs i was thinking paint / decals and weathering " finishing work" I thinknit would look Great!
Wow!!, are you selling any ships. That was amazing from a 3D printer.
Been a while since I've seen 5 & 6 but isn't it supposed to say "USS ENTERPRISE" above the ncc-1701?
You should try it for Real !
How well does this click - no glue system stand up when you blow up the size (after all I imagine the tolerances would get to big (and ugly))
I want a Sovereign class and Odyssey class.
What 3d printer are you using. That model is awesome.
I want that
Download and print!!!
What’s the max you can scale that ip
It's good, but is it $7.99 plus $3.99 for the stand good?
It’s good~
No, it's $9.95 good when you buy them both at the same time 😂
@@Reicher55 But it's not really is it, you can find free ones and better ones if you just search!
Wonder if the pylons would hold up better the average model kit?
The seems are nothing some modeling putty can't fix.
USS Reliant please
All hail the Miranda Class! ❤
I would love to buy the finished product from someone as I do not have a 3D printer.
Having issue with foldable hinges. Any settings help would be appreciated.
Please send photos via email to info@fab365.net
What color and brand of PLA did you use? It looks great. I would like to print with it please.
I used light grey PLA filament from colorfabb.
Not trying to sound dumb here but would please explain this to me! Do I have have a printer to do this or is sold this away and I just essentially snap
It together?
You will need a 3D printer, the STL Flies that are needed can be found in the discription under the video, simlpy click on the link. This takes you to the site where you can buy the files and down load them.
Ok. So when it prints, does lol like it looks here in the video, were you just snap it all off that what ever it is, it’s on and then you just snap the whole model together?
Or would I need a special type of printer?
You know what it's about using a 3d printer to design the enterprise tmp refit a version
Hey how much to make me one?
I always find it that 'beloved' Enterprise design are actually hated when They first appeared.
Low level larger scale minimum production to check interest of model builders and collects interest in new build type click together format. Good luck.n
I do not own or know anybody with a printer.
How much if you print one out for me?
-Thanks😊
Sorry it looks like a putty nightmare, I thought the new Airfix B24 wing roots were bad. Life is too short...
Do you sell kits?
Not yet. This is a suitable digital file for 3D printer.
WHY!!
Why not?😉
if you make the kelvin timeline enterprise, my life will be yours
My favorite ship. But, this design sucks. Lots of removable panels that add deeper seams in places where they shouldn't be. You'd be much better off buying a model kit if you want it to look good.
I mean, that's a poor argument. Most of these issues could be resolved by taking the time to use a good adhesive like CA or something and some modeling putty and a fresh coat of paint from an airbrush, all things you'd do standard on most plastic models if you want to lose seam lines anyway.
@@tkardaishou I'm not trying to make an argument. I'm just stating an opinion.
How much time did it take to make this neat little kit?
*******************************
I have the Enterprise-A kit with sound effects and lights.. I don’t have a 3D printer. I would make a bigger scale Enterprise-A, B, C, D, E, F, and G at the same scale as 1/50, with interior compartments, running lights, and removable decks. Little figures in TOS to TNG uniforms.. IMHO
33 horus? Seriously?
With one 3D printer, 0.1mm layer(high quality slow print setting)