You ask "long or short" videos? I am OK with whatever you wish to make, as you know, we beggars should not be too choosy. For any complainers, if you wish the videos were longer, watch them at 1/2 speed, that ought to just about double the length. I have a different yet identical suggestion if you wish they were shorter....... THANKS FOR SHARING!
Great video and much appreciated. I don’t see a lot of videos here specific to bracing. heard you say 11 gauge, and I see someone else mentioned inch square. Do I have that correct? Also, I’m working on a slightly sloped driveway. I assume it is necessary to level the car to work on the body, but is it okay to do that with jack stands or do I need to find level ground? Thanks again.
Liking the home made body cart - I’ll have to remember that. I’ve just used a single plate castor on a tube at each corner. Not as stable but it has worked for me in the past.
I'm also restoring a 1950 custom I bought 5/8 square tubing 16ga would that work its a bit thinner so I was planning on gusseting it and adding in cross members. What would you recommend.
I'm working on a 67 nova I got to replace full length floor boards not all of the floor and the seat brace under the floor do you recommend I brace the car?. The car still mostly together doors still on rear end front sub frame and engine all still on car
Without seeing it it’s hard to say. I did the full floor in my truck with no bracing. And floor pans in my Travelall with non. Of course they are constructed a lot different
That’s a lot of room to work in. It’s like a master bedroom. Thanks for posting. Lots of great advice!
Your attention to detail is great. Even in your temp bracing you spend the time to do it well.
Thanks!
Awesome video! EXACTLY what I was looking for today!
I like the longer videos but all are good. Cant wait to see the progress on this.
I like the longer as well.
Love to see you doing stuff like this every one don’t know how to do body work
I like em full length. I try and watch them all the way every time.
👊🏻👊🏻👊🏻
It’s all about prep and attention to detail
I like both style of videos.
That works!
Doing great work keep those videos coming.
Thanks Tony. 👊🏻
You ask "long or short" videos? I am OK with whatever you wish to make, as you know, we beggars should not be too choosy. For any complainers, if you wish the videos were longer, watch them at 1/2 speed, that ought to just about double the length. I have a different yet identical suggestion if you wish they were shorter....... THANKS FOR SHARING!
Good math!
great info...keep em coming. longer the better!
Great video and much appreciated. I don’t see a lot of videos here specific to bracing.
heard you say 11 gauge, and I see someone else mentioned inch square. Do I have that correct?
Also, I’m working on a slightly sloped driveway. I assume it is necessary to level the car to work on the body, but is it okay to do that with jack stands or do I need to find level ground?
Thanks again.
Liking the home made body cart - I’ll have to remember that. I’ve just used a single plate castor on a tube at each corner. Not as stable but it has worked for me in the past.
Ya that’s what I was worried about. This way is nice and stable
a trick: watch series at flixzone. Me and my gf have been using it for watching all kinds of movies during the lockdown.
@Saul Sincere Yup, have been using Flixzone for years myself :D
@Saul Sincere yup, I have been using Flixzone for years myself :D
@Saul Sincere Definitely, I've been using flixzone for since december myself :D
Good stuff. Keep the videos coming
Will do
Longer the better
I like the 45 min to 1 he video
Nice job
Remember when I did my 1st car I didn't brace anything and well it turned out very bad
Classic Puddin
Nice vid. Thanks man.
Thanks for watching!
I'm also restoring a 1950 custom I bought 5/8 square tubing 16ga would that work its a bit thinner so I was planning on gusseting it and adding in cross members. What would you recommend.
PUDDIN gets floored lol :)
I enjoy the longer videos myself. 10-12 minutes .
Ya I have a hard time hitting that number it seems like. Either really short or really long lol
@@PuddinsFabShop me too ,either mine are 15 minutes or 3 minutes lol
I figure the people who want to watch will. Can’t win them all.
Great video! I'm about to pull the body off a VW Ghia and put it on a dolly. First time... any tips on best bracing?
Front to back, side to side, and any angles you can work in.
short and sweet
I'm working on a 67 nova I got to replace full length floor boards not all of the floor and the seat brace under the floor do you recommend I brace the car?. The car still mostly together doors still on rear end front sub frame and engine all still on car
Without seeing it it’s hard to say. I did the full floor in my truck with no bracing. And floor pans in my Travelall with non. Of course they are constructed a lot different
Long...short, I don't care. Forget about it. ❤
You pulling in any Ad revenue yet? They put 2 ads in front of all the videos now!
Negative. Haven’t been paid once. Don’t get enough views.
Comment down below.
🤩🤩🤩
longer!
Thanks!
Thats what she said!...
Great video, thank you. What gauge 1" steel square did you use? KJ
watched again. 11 gauge. KJ
That’s it!
👊👊👊
👍👊
I miss the old Puddin, straight from the 'Go Puddin
Chop up the soul Puddin, set on his goals Puddin
I hate the new Puddin, the bad mood Puddin....
I’m never in a bad mood lol what are you watching.
@@PuddinsFabShop th-cam.com/video/ch8g-sJb6ow/w-d-xo.html Lol ... I just miss this old content