Easiest Drill Charger Station // DIY Cordless Drill Organization

This was a quick, fun build with a couple miscalculations along the way. Because I messed a couple things up, I decided to make some plans so that no one would make the same mistake I did.
Plans can be found here: www.etsy.com/l...

[@nwbuilds]

If anyone is interested in plans, I created some for $2. Including cut list, tools, and directions.
www.etsy.com/listing/941814693/cordless-drill-charger-station-plans?ref=shop_home_active_1

[@BravoProject]

Bought your plans, built it this evening. Are you on Facebook so I can send pics?

[@nwbuilds]

@@BravoProject no, but you can find me on ig @nwbuilds !

[@cyrinavassell2455]

can I get the measurement please for all of the play wood

[@Micha_Ba]

​@@cyrinavassell2455Sure, spend 2$ and get u the Plans.

[@WiseMovement]

Awesome Work!! your video gave me the ideal to try and build my own tool organizer and it came out ok, Thanks

[@BigEbobbers76]

Dude, lower your saw blade until its just over the thickness of the material. 1, it's much safer, instead of losing a finger you'll just knick them. 2, straighter, smoother cuts. Excellent video, thank you for posting

[@djlhobbies2579]

Thank you, thank you, thank you, finally somebody on here building a project like this with just regular construction grade plywood and not that expensive stuff!!!

[@FixItFrench]

Excellent work! I've been planning something similar to this for my tool wall. I like how you put the top board down a little bit so you could have a 2nd shelf. Looks great man!

[@nwbuilds]

Thank you! I'm very happy with it. The only thing I'd say is I wish I had space right above my workbench to put it.
The second shelf works great, so that the chargers don't fall off.

[@nwbuilds]

Thank you! I've found that shelf helpful because the chargers don't spill of the side that way.

[@johnanderson1818]

Let's go Redwings! 💯 Great video too!

[@nwbuilds]

LGRW! Thanks!

[@tuckeret]

where are the plans

[@paulslover58]

Thanks, plans are great! Very helpful for when I built mine

[@waynemiller6070]

7:27 Laughed out loud. Nice caption!

[@darrelduke]

i recognized those spray paint marks on the sheet goods...nice work.

[@jameslowmanjr6141]

Hey to let you know you take those horizontal shelves down. Take the screws out of them set the fence up to whatever the thickness of the upright board is and run it down the table saw to cut the shelf off. You might lose what’s the thickness of a sawblade times two on the shelf boards.

[@grandtrunk49]

Just made two of these. Good job.

[@nwbuilds]

Thanks, C8! I hope it works well for you!
If you post a picture on ig, tag me @nwbuilds

[@brentlazzarino7171]

I don't have any drills but I'll make this one day.

[@nwbuilds]

Thanks Brent! I hope it works well for you

[@jjrock5]

What type of screws and length did you use? Thanks.

[@nwbuilds]

I believe I used 1 3/4" or 1 1/4" hex head screws for this whole build. After renovating my house, I swore to never use philips head screws again if I can avoid it.

[@johnstone9396]

You must have gone to the Derrick Zoolander school for kids who want to do math Gooder, go wings!

[@dm9078]

The plans are no longer available

[@ScuttleProductions]

Forget making it symmetrical! Store saws all blades in that extra pocket.

[@nwbuilds]

Great idea!

[@rkooscar6866]

I need this

[@nwbuilds]

Thanks, RKO. I created plans if you're interested. In the first pinned comment.
Welcome to the channel

[@saltydog-xy4xk]

Bravo Zulu

[@GejtuIlmouse]

Sap