15" inch MacBook Pro A1990 2018 Disassembly Battery Trackpad Touchpad Replacement Repair
ฝัง
- เผยแพร่เมื่อ 23 เม.ย. 2021
- Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/referral/binh58522 - แนวปฏิบัติและการใช้ชีวิต
Very special thanks to you for this very clever and mindful tutorial that permit to me
to go from the first to the last step without any issue nor any doubt!
Best regards
No problem. Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others and commenting to get the algorithm to recommend my channel. Thanks!
Thank you very much for the very helpful video! It really was a huge help! Also turning the plastic tabs around on the new battery before securing it down was such a great move so kudos to you my friend! All the best :)
Awesome, glad it helped. If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
Patience of a Saint, excellent tuitorial, kept your cool all the way through the fiddly bits, well done you!
Lol Only with computers
great job, really helpful. I screwed up the screw organization a little bit.... even though you warned us. Much to my amazement, my Mac is functioning thanks to your guidance.
Awesome, glad it helped! If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
This helped me quite a bit. Thanks for mentioning which motherboard screw was a little longer! I did not remove the trackball. I used a combination of dental floss (which only worked on the side batteries) and a small plastic drywall putty knife to get out the center batteries.
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Great video indeed, followed it step-by-step and it worked I even lost and found some of the tiny washers on the trackpad just as you did and at the end a complete success! Thank you very, very much.
Awesome, glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
This is such a great walk-through. Thanks a lot.
Glad you liked it. If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
Dear, I am very grateful for your help in publishing this video, after changing a battery for one of these same devices and without your video I would not have been able to, great detail and very well explained. Thanks again.
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thank you for providing this video, I was following along and was able to swap my own battery using this as a guide, thank you very much for your time doing this.
Awesome, glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Battery changed!
Thank you for this very clear and very explicit tutorial.
Sincerely,
Pierre
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others and commenting to get the algorithm to recommend my channel. Thanks!
@@ItsBinhRepaired subscriber and liked 😉
@@pierrotlepecheur thanks! :)
Hey man, I cannot describe how good your video is. Thank you so much for sharing this. I replaced my battery following this video step by step. Best regards from Argentina
Glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
I couldn't have done my battery replacement without this video. Thanks a lot for making and posting it!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thanks for your Video! It’s so helpful!
Glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thanks very much for the detailed explanation. All best 👏
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Your tutorial saved the day! I was following another tutorial where I had to take the board out. However, two of the T3 1.7 mm screws securing the bracket for the display board cable connector were blocked and I had no options. I watched your tutorial and used the trick with going underneath the board! Thank you very much!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you so much for your perfect instructions. Saved me a ton of money!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
If you're feeling generous, contributions to the channel are always appreciated as well.
It really helped me, thank you!
Glad it helped. If you haven't already, pease consider helping by liking and subscribing and if you can afford to, possibly contributing a small amount to the channel. :)
This looks crazy… But I try, and this works! Thank you !!!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank You! Saved me $$$.
Glad it helped! If you haven't already, please like and subscribe so others can find my videos and consider sending a little of the savings my way so that I can continue to do this for a living. Thanks!
thanks for this.. lifesaver
Glad it helped. If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
Brilliant… thx mate.
Glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
the turtorial works!!! thank you so much!!! my computers battery has been replaced successfully!!! ❤️🙏
Glad it worked. If you haven't already, please like and subscribe so others can find my videos. Thanks!
@@ItsBinhRepaired will do. Thank you!!! 🙏
@@EvolvingMagic Thanks!
very helpful
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thanks! I installed it successfully. It was extremely difficult but thanks to you I got it through. Though my new battery works, it gets hot when charge. Did I do something wrong? Any suggestions??
Awesome! As long as the connections are tight it should be OK.
Thanks man
Glad it helped. If you haven't already don't forget to like and subscribe so others can find my videos. Thanks!
Thanks this was very helpful. Stupid for Apple to put the battery tab under the logic board but guess they do that so it’s harder as you said.
Yeah, I'm sure their next devices will be irreparable.
I have another video showing an easier way, propping it up with popsicle sticks.
@@ItsBinhRepaired yeah I ended up using a plastic pry tool to prop the logic board up on two sides.
Thank u my brother
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you brother.. well done - just followed your steps, new battery in.
Awesome, glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others and commenting to get the algorithm to recommend my channel. Thanks!
@@ItsBinhRepaired I can do that, sent a few bucks too. My trackpad isn't working now; I suspect I did not remove all the adhesive under that battery in the center; it might be adding back pressure to the trackpad. You think that's possible? I connected all the connections and followed your video you did so well. However, I got lazy with the middle adhesive/tape from the original battery.
@@eithercy did you remove the trackpad before removing the battery?
@@ItsBinhRepaired I did not.. my mistake. I thought you were replacing it for that customer, so I skipped ahead. I probably messed something up - honestly. It was working well before that
Likely the trackpad was damaged or the cable got yanked out
Great video - Made the job easy. A virtual 0.8 torque screw driver would have been amazing :)
Glad it helped. Virtual 0.8 torque screwdriver? If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Phenomenal video! Excellent quality, excellent advice, and excellent tips and specs on screwdrivers special tools etc. I couldn't nor wouldn't have attempted this without your video. I used the scrape method to remove the batteries as shown, but I didn't have a scraping tool on hand. I ended up using a hacksaw blade, which is pretty flimsy when not attached. I used a bench grinder to file off the cutting teeth. I ended up cutting into and arcing one battery pack using this tool, but it didn't harm the computer. Still wondering what happened when the awful decision was made to use adhesive to hold the batteries in place! Thanks again! Keep it up!
Awesome, glad it helped! That's what I like to see! Thinking about the tools you have on have and finding ways to make things work. There is no exact way to get things done. Glad you were able to get it done and the arcing didn't damage anything. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Life saving!
Glad it saved your life. If you haven't already, please like and subscribe so others can find my videos and consider a life saving contribution. Lol jk
Ho thanks so lot ! 👍😉
No problem. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thx!
Glad it helped. If you haven't already, don't forget to like and subscribe so others can find my videos. Thanks!
Very good video, well explained in a simple and easy way. Thank you. Could you please tell me where you bought the screwdrivers, since I need good ones, the ones I have have not turned out so good, I would appreciate it.
Thanks! This set will work amzn.to/3F7IcwH
If you plan to do more repairs, the moray and mako sets have a lot more bits.
Hey bro
My macbook pro a1990 2018 turning off but trackpad still clicking
I reset PRAM & CMR
Unplug the buttery
Getting warm the motherboard a little
After all I use UFD mode to revive the device the a error showed to me :
amrestoreerrordomain 0-6
Do you can help me please ? I'm in bad sicouation and I'm in a deeply mode in my life for that loptop.
If you can help please and get me a way to turning it on.
In my country apple center & official center of the apple not here!!!
Not sure. Sounds like motherboard issue.
Ouch! I broke a nail .. :D ... thanks for the video!
Lol did you really? Glad the video helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
After I did all this. The trackpad started giving a very loud clicking noise! But that only happens when the cable of the trackpad is connected! It had nothing to do with the screws... Any tips?
Did you lose the washers?
thx bro ！
Glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
This is a gem 💎 for sure, My current office laptop is crashed , I'm Pretty sure the battery is damaged bt I also have another office MacBook Pro laptop that is not working, Wanted to replace it's battery to the current laptop Im using...
But I'm pretty scared , since I have to do this 2 times on 2 office laptops 😑 I'm really stuck can't resume my work ...
Hope it works out!
following this step on video, i can change my mac battery succesful
Thanks
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Hi, I changed the battery but it doesn't turn on, I can feel the trackpad clicking, I've tried resetting the smc and nvram, but it doesn't turn on! help me, sorry for my english, I'm from Brazil
Was it working before the battery change?
Hi, great video. What is wrong, when I can turn the macbook on but if connected with power it doesn't charge?
Charger, charge port, battery, or battery connection. Could also be a motherboard problem.
@@ItsBinhRepaired Thanks for your very quick answer. It just started charging - maybe it needed some time? Don't know what happend. Thanks
Strange. Oh, one other thing. The newer os has a battery monitoring software to extended the useable life of the battery. Maybe that's what was happening.
@@andreaspfiffner6631 maybe this is the cause th-cam.com/video/Az1hcXXEcHQ/w-d-xo.html
Thank you so much this video really helped, Do you have a video for removing the fan and applying thermal paste?
Not paste, but this video will get to the screws for the paste. th-cam.com/video/rwjcEGA-dr0/w-d-xo.html I'll send another on how to do paste.
You can skip to where paste is being cleaned and applied th-cam.com/video/rGxIsNIx2hs/w-d-xo.html
@@ItsBinhRepaired I know how to clean and apply thermal paste but I want to know how to get access to the heat sink
@@OmniPlayz_TTV watch the first link I sent. You have to take the entire motherboard out. The screws for the springs are on the bottom.
@@ItsBinhRepaired Thank you so much, I ordered all the parts just waiting for delivery but out of curiosity how much do you charge for cleaning dust and replacing thermal paste.
Where can I buy the metallic blades that you used to remove battery?
This amzn.to/3nNyqbF but you'll need to file it thinner.
Or this amzn.to/3tSA9NV
Hey i got a battery x icon after replacing. Dont really know what the problem is. Does anyone have any solutions or suggestions on how to solve it? Thanks
Double check the battery cable and metal tab
Tripled checked but will again. Also think it is the batterys fault and asked for a replacement. Also bought some new cables. Just wish i can fix it quicker
@@syeminpark maybe bad replacement battery
Hey! You got any links for the OEM battery replacement?
Only way to get new oem batteries is by Apple repairing it. I can send a link to good aftermarket batteries.
@@ItsBinhRepaired What are good aftermarket batteries?
I have a question, what is the s wire near the battery ? I had an issue when removing it
Battery connector
@@ItsBinhRepaired Ugh ! Thanks for the info
@@charliehowell6015 yup
Thanks for the video! I changed battery but now keyboard isn’t working… no activity. Touchpad works fine…
Double check all connections. If you damaged part of the trackpad it can make the keyboard non functional
Hello, man, what brand of screw driver you used? Its looks very pretty). Many thanx.
Haha some cheap Chinese one. I ended up switching to the ifixit ones. Very good quality.
This is what it was amzn.to/3muPAt8
These are the bits I use now amzn.to/3ej1Rwr
hi, what battery did you use?
This one amzn.to/3SIgeh7
What to do if you break the seal of the battery and a flame pops out?
Get the computer outside away from flammable things.
I moved it out to the covered porch (it's raining.) But then what? It's open, and I was separating the left half of the battery from the shell when it happened.
-Did I kill my MacBook Pro?
As long as you disconnected the battery before it happened, you should be fine. Hopefully you followed the video carefully.
I had similar issues. Would be great if you can share some techniques to avoid such problems. Thanks!
be careful with a metallic blades because if you punch the battery it can start a fire right away
They aren't blades. It's a spatula. Been doing this over 10 years without any issues.
Great video - well done!
Personally, I don't trust myself not to destroy my MacBook for the sake of $100 saving :-)
Haha
That is not dental floss, but dental tape, which is different.
I see
Use alcohol and hotel room keys to get the batteries loose.
Lol I don't think the hotels will appreciate that
As someone who's done this for over 20 years, you NEVER use a metal tool when working with batteries. ALWAYS use Plastic spudgers. Second, ISO Alcohol is your best friend when it comes to adhesives. Great video, but you really could cause injury to your self and the equipment you're using by using metal pry tools around batteries. All of us professionals do NOT use metal only plastic. Check Ifixit for additional tools that will help make this process easier for you and safer.
Lol I did this on hundreds without any problems.
Why be difficult, when, with a bit of effort, you can be FNG impossible!!
Yup, aim to be the best at being impossible to repair. Lol