very good video, I would be very grateful if you do the simulation of fluids with a pressure, velocity, viscosity, temperature and all the parameters that we must consider for a real solution to a problem. I am analyzing a steam pipeline for a thesis work and I am looking to establish the structural impact of the noise generated in the pipeline caused by the detachment of the boundary layer.
Hi sir, I tried to create a similar CAD file in Spaceclaim and import it to standalone fluent meshing (2021R2). However, there is only 1 face zone which is the entire surfaces of the Tee. Why doesn't my fluent meshing automatically create many face name as yours? (at 5:34 left down corner) Thank you.,
I have the same problem. You have to initialize Fluent from (Windows 7) All programs>Ansys>Fluid Dinamics>Fluent and you have to run as administrastor. There you will see Watertight geometry
@@chebusann hi there. I'm using Ansys 2020 R2. Fluid dynamic is nowhere to be found after i select ansys in all programs. I have the same issue where workflow tab is missing, only outline view is there. Hoping for a solution here :'(
Excellent work, great tutorial material. Thank you
This was a very impressive and useful video thanks for sharing...
Create an unstructured mesh of Gable low-rise building (Convert to Polyhedral mesh)
th-cam.com/video/UFW-ISTEHq0/w-d-xo.html
very good video, I would be very grateful if you do the simulation of fluids with a pressure, velocity, viscosity, temperature and all the parameters that we must consider for a real solution to a problem.
I am analyzing a steam pipeline for a thesis work and I am looking to establish the structural impact of the noise generated in the pipeline caused by the detachment of the boundary layer.
It was nice lecture
Thanks for video.
love the music!~
In 2021 almost everything is different.
Hi sir,
I tried to create a similar CAD file in Spaceclaim and import it to standalone fluent meshing (2021R2). However, there is only 1 face zone which is the entire surfaces of the Tee.
Why doesn't my fluent meshing automatically create many face name as yours? (at 5:34 left down corner)
Thank you.,
When I get to the capping stage, I have no labels listed. I only see zone. Can you advice?
Selection type> zone.
Then, Select the surfaces from the model.
after loading fluent meshing there is only outline view, no "water tight geometry" workflow
I have the same problem. You have to initialize Fluent from (Windows 7) All programs>Ansys>Fluid Dinamics>Fluent and you have to run as administrastor. There you will see Watertight geometry
Which version of ANSYS Fluent are you using?
@@chebusann hi there. I'm using Ansys 2020 R2. Fluid dynamic is nowhere to be found after i select ansys in all programs. I have the same issue where workflow tab is missing, only outline view is there. Hoping for a solution here :'(
@@naziffamamat3676 hi i have the same problem do you find the solution ?
@@shadow_pkz4684 no i didn’t find any solution