Bro, thank you for gifting the world with great content and sharing your knowledge! Keep gunnin and doing the lords work. $20 plus a subscription so you can buy lunch lol and if you ever want to visit Alaska you’ve got a nice place to stay (pause) and a really nice k20a ep3 ctr replica-mod to drive around thanks to yourself 🫡 🔫❤
I am watching you since the RX-K, and I have swapped my own Rx8 with a K24A2, and your videos made it possible. And this week I am doing my fuel system with AN fuel lines. Thank you❤
Daaaamn bro, I fucking love your vids man, I'm learning so much informative information. I been looking to do a similar setup in the TSX, because nobody who's driving a CL9/CL7 or CL8 has a shaved bay, nobody as AN lines, nobody has a custom radiator in their TSX's. I'm pulling my motor next week and cleaning everything up.
Am not gonna Capp bro these videos you make are so detailed! I sure admire your work is so dope!!!!! If you don’t mind can you put a link to your tool you were tightening the connectors with when locked on the vice
Oooo knowing you use Evil Energy an fitting just made me feel so much better. I made an entire fuel setup using E E fittings and been having that fear of them failing on me
@29:58 no lie! aluminum on aluminum. you def WANT antisieze or grease. as if over tightened, the threads will either strip out completely or fuse togther.
should link the tools needed with an amazon or an ebay affiliate link, inside video description. i just ordered this wrench and soft jaws. thanks for info!!
Another great informative video, I wish I could of got information like this when I was in school cuz they would get a lot more people showing up for the gems u drop my guy🔥🔥🔥
Good morning aki, a thing that I do is use a rubber mallet when the fitting isn’t going all the way down on the hose. I give it a couple smacks on the fitting then continue to “thread” on. Good day🔫🔫.
Hi KG Garage, This is Kristina from ANCEL. I am reaching out to see whether you are interested in reviewing our OBD2 diagnostics scan tool? Looking forward to your reply.
@48:29, NO HATE HERE, just perspective. i feel both youre feed and return lines should be ran on top side of motor mount, opposed to under side that way you can clamp and run both lines together, clean and smooth along top side of your frame rail. this will have less waves, and swoops and bends. as it would run along side the braided clutch line, keeps a cleaner more though out pathway for the lines to run. again, no hate. just friendly automotive perspective =]
Okay thanks u for you honesty 🙏 I paint cars for a living I heard u say I like to make ur garage something bigger I'm down to make. Something happen prefer that we going to talk about that personally and so you can see what I'm about and that I also want to do bigger things they just work for a automotive shop
Bro, thank you for gifting the world with great content and sharing your knowledge! Keep gunnin and doing the lords work. $20 plus a subscription so you can buy lunch lol and if you ever want to visit Alaska you’ve got a nice place to stay (pause) and a really nice k20a ep3 ctr replica-mod to drive around thanks to yourself 🫡 🔫❤
I appreciate that!
I am watching you since the RX-K, and I have swapped my own Rx8 with a K24A2, and your videos made it possible. And this week I am doing my fuel system with AN fuel lines. Thank you❤
Most informative video out A N lines.
The best channel on TH-cam
Def saved this video....N just so you no, never stop saying pause... your videos would never be the same if u stopped...
i appreciate you aki Pause
Storing this 1 vid in the archives.
Daaaamn bro, I fucking love your vids man, I'm learning so much informative information. I been looking to do a similar setup in the TSX, because nobody who's driving a CL9/CL7 or CL8 has a shaved bay, nobody as AN lines, nobody has a custom radiator in their TSX's. I'm pulling my motor next week and cleaning everything up.
Great information step by step
Glad you liked it
Gotta redo my lines now! Looks so much cleaner this way!
Am not gonna Capp bro these videos you make are so detailed! I sure admire your work is so dope!!!!!
If you don’t mind can you put a link to your tool you were tightening the connectors with when locked on the vice
Lmao i love the pauses 😂😂😂 my favorite part of the video, just started watching you…. Pause… lmao
Damn Aki! That's awesome. You wanna come to Europe for a few weeks and finish my car.😆😆😆
Thanks for the video Great explanation on everything it was really helpful Bout to do it on my car soon
Thanks for informing video I've always struggled with these
Keep Gunnin
Thanks brother!
Thank you Aki!
*That 🚽 Aki* 😂😂😂
@24:39, now there is the goods. thats an accurate measurement. very nice!
Best explanation ever great work on this vlog love long vlogs PAUSE
Great video 👍🏾
Best honda builder on TH-cam
Oooo knowing you use Evil Energy an fitting just made me feel so much better. I made an entire fuel setup using E E fittings and been having that fear of them failing on me
@31:20, i LOVE that color scheme. shit if fuego!!!
Hell yeah First like, let’s get this amazing vlog going 🔫🌎❤️
Hope you enjoyed it!
@29:58 no lie! aluminum on aluminum. you def WANT antisieze or grease. as if over tightened, the threads will either strip out completely or fuse togther.
thanks for video. excellent info.
Yerrrr🔫💙😎
Good work 🧼🔥🔥🔥
-16 is some of the hardest hose to assemble but you made it look ez 🫡
Great video aki. Very informative 🔫🔫🫡
Glad you liked it
Great work and thank you
fire vlog
Facts I hate the summer too I’m good with winter fall and spring
❤💯💯💯 thanks you aki, I'm looking into doing my fuel pump in the civc. In this is a big help
Glad I could help
NFL love bro
💎💎💎 save this video!
Man I can’t wait to get the Rsx in the garage and just start with a blank canvas. And apply all that you taught me on this channel 🔫 🌍 ❤️🤞🏼
You can do it!
GG my dude! Got this one stashed away in the saved folder, will be plumbing my car in a few months. THANK YOU!
Glad I could help!
Videos always 🔥🔥 kg 🔫🌎
Dropping knowledge and saving people money! KG garage
should link the tools needed with an amazon or an ebay affiliate link, inside video description. i just ordered this wrench and soft jaws. thanks for info!!
Nice work. Thanks for the lesson!
Grateful, king Aki! Peace and love.
I love PTFE hose
Man I’d love to have you do some work on my car
Another great informative video, I wish I could of got information like this when I was in school cuz they would get a lot more people showing up for the gems u drop my guy🔥🔥🔥
Glad it was helpful!
Let's gooooooo N another one. Respect 🙏💯💪🔫🔫
Thanks again for signing plank for me bro! And perfect timing as I'm about to upgrade my fuel system.🎉
Any time!
come to canada and sign my civic when its done
Thank You 💎🔫 KG Garage awesome work like allwayz
Thanks. I plan on doing this to my h22 cb7 thats being built for my Pops 😇(R.I.P) we was going to do it together.🔫
cool video bro! you should tuck that clutch line as well, behind & under transmission mount
Alright guys 🤟
Great video, maybe next u can show how u wire up the relays.
Subbed!!
Any links for where to find the hoses/fittings im having a hard time sourcing them. KG 💪🏾
If you keep making how to videos like this you will hit 100k subs fast
Hope so!
He’s been doing this since the beginning.
Gems 💎 as always. 🔥👍
Where you get the hold down for the fuel lines I like them
What a nice Vlog thank you for this content very very informative . And I want that T-shirt😁
Any time!
This guy is the goat !!
Again and again come in man you got to do someting I am trying but please not again…respect the hustle respect…🤦♂️🇵🇷 guns down 🎉
Nice ..got a lot of knowledge here..
Happy to help
Buen vídeo bro , pero esa no es la manera más eficiente del sistema de gasolina , feed aparte
Salute aki gunner fam , hitting out to work watching the vlog on the way let's get it 🔫🙏
🔥🔥
Up state NY tranquilo pai nice job....⚠️
Good morning first of all God bless I have your text
@ClickOnProfile2002 keep gunnin
Very informative video thank you aki for giving us these free gems!!! We owe you 🔫❤️!!!
Super informative
Glad it was helpful!
Amazing Vlog ❤️ Great Job Big Bro
Thank you 🙌
This video gonna help so many people!🫡 Professor Aki always dropping knowledge!📚
Can I get a 🗣️YEEEEEEEERRRRR!!! ❤️
when you come from korosumyself
@43:01 you have clamps that are -6/-8an or is it just for -8an on both clamp holes? thank you in advance!
Good morning aki, a thing that I do is use a rubber mallet when the fitting isn’t going all the way down on the hose. I give it a couple smacks on the fitting then continue to “thread” on. Good day🔫🔫.
Good ass content
Alright guys
I'm so lost!! Where is Trap?
What bran AN lined and footings are you using
Noti Gang ❤️🔫❤️
no E85 on this build? i thought e85 had to use PTFE an lines? apposed to rubber ones? just curious. appreciated!
That is what specs said im running e85 more than a year with cpe not problem at the moment probably later but at the moment everything works perfect
U left the tape on there maybe that’s why that 45 was hard to get on
185? That's without AC at night?
29:06 pause
Hey where’s trappy at
U shoul leave some slack in the line for motor rock
Hi KG Garage, This is Kristina from ANCEL. I am reaching out to see whether you are interested in reviewing our OBD2 diagnostics scan tool? Looking forward to your reply.
@48:29, NO HATE HERE, just perspective. i feel both youre feed and return lines should be ran on top side of motor mount, opposed to under side that way you can clamp and run both lines together, clean and smooth along top side of your frame rail. this will have less waves, and swoops and bends. as it would run along side the braided clutch line, keeps a cleaner more though out pathway for the lines to run. again, no hate. just friendly automotive perspective =]
Nobody doing race fuel lines like that, there still using the factory steel lines, 1 step ahead
🔫🔫🔫🫡🫡
🔫🔫
🔫🔫🔫🔫🔫🔫🔫🔫🔫🔫🔫💪🏼
🔫🔫🔫🔫🔫🔫
Aye homie your pauses are getting better I am rocking w you now lol
Hey Augie it's me you said I want something but I've been trying to contact you
👍🏾🔥
I mean that I won something do you have a number or an email that I can email to you
Ummm??? What? lol ❤
Sometimes scammers comment on ur comment saying u won something on popular channels, perhaps that's it.
Okay thanks u for you honesty 🙏 I paint cars for a living I heard u say I like to make ur garage something bigger I'm down to make. Something happen prefer that we going to talk about that personally and so you can see what I'm about and that I also want to do bigger things they just work for a automotive shop
🔥🔥