I don't think I've ever gotten to know someone else's car so well. Working back through the videos since I'm doing my standalone right now, and, man I'm so happy your car is running again. Thank you so much for documenting this process.
Congrats Luis! Solid build. Way to go it's been a long journey and you're almost done. Just the small stuff to finish up then you'll be on the streets again.
HELLYEAH!!! Been following since the car was white and you got the wheel setup. I beleive it was this channel that exposed me to the a70 platform and swayed me away from s chassis. I picked up a 88 last year and have plans for it. Nice to see something that has a lot of love be kicking strong!!!!
Love that you kept the 7m man I just did everything new under the hood I could going for 600whp got aemv2 and 6262 billlet turbo with some Injector dynamics 1050x so should be fun
She runs! This is so weird of a coincidence but I got my mk3 running too after nine months just yesterday 😄 also still had a few bugs to work with but otherwise everything checks out fine
@18:48, did you use sheilded cable for the Cam & Crank Sensors, number two Did you Ground the Shield on ONE END ONLY (Either Engine block or ecu side) to ensure that there's zero interference? Man that first start and reacion had me grinning so happy to see this thing and hear it start in so long since i've been watching these videos.
cool video. as always. Do you have tips for rough ideling when cold? or hard to start? (sumemr too) I know sometimes moisture is in the connectors of ignitor and AFM connector , i will use delectic grease carefully . but do you any other tips?
I would disable the clutch-in-cranking requirement as it will mince your crankshaft thrust bearings if you have a clutch with high clamping force because it is applying load on them before you have built oil pressure so its metal on metal
Man love to see it. This past December I bought a second mk3 with a 7mgte from copart and just needs a few things to be complete. Can’t wait to drive it since my other mk3 7mge blew a head gasket not even 4000 miles into a completely rebuilt engine because of a bad thermostat. Can’t wait to drive the new one since it’s in a lot better condition overall than my other one and already has hella upgrades.
I went through so much with my first supra but at the end of the day I still love driving these cars because of the smile it puts on my face with the crazy torque and insane 3rd gear.
@@-LFATV I will be using the red one I just got to daily and prolly use my old one as a drift car to have fun on the track. It has a very similar color to yours. I remember being inspired by your car for the paint job a couple years back.
Hi! Thanks for posting these videos. I really enjoy them. I have a 91 5 speed 7mgte that is not running. I’m located in the Bay Area and I have a hard time finding a shop to do a rebuild. You know of any? Do you do rebuilds? Where are you located?
Thank you for watching, unfortunately no i dont, i barely have time for my own car lol but there is a few in california. Top of my head i can think of “sideways performance” but quick search on google
Hey man, Is there a way of seeing your spec list other then on Facebook? I am especially interested in your intake manifold, headers and turbo. Much appreciated 🙏
This is so awesome man! Well deserved! You should do an after build video Id like to hear if there's anything you wish you would of known to do in order to avoid some problems and make the build a little easier. Also what was the budget and did you go above it?
I miss the old house sounding song from back in the day can't really describe it.
Alot of my older songs are copyrighted lol
So glad to hear her running man!!!!!!!!
I don't think I've ever gotten to know someone else's car so well. Working back through the videos since I'm doing my standalone right now, and, man I'm so happy your car is running again. Thank you so much for documenting this process.
Thank you so much for watching 🙌🏼
Biggest inspiration to hurry up and build my own MK3 🙏🏽🙏🏽
Heck yea man get it 👏🏼
Congratulations. I was excited like this is my car. I'm happy for you.
Lol 😆 much appreciated
A damn fine day, congratulations Luis. Skip & Louis 👍
Thank you very much
Luis me alegra que ya lo terminastes y quedo bien chilero
Gracias, ay va poco a poco
Congrats Luis! Solid build. Way to go it's been a long journey and you're almost done. Just the small stuff to finish up then you'll be on the streets again.
Yes sir thank you, few importnat things ti take care of still
HELLYEAH!!! Been following since the car was white and you got the wheel setup. I beleive it was this channel that exposed me to the a70 platform and swayed me away from s chassis. I picked up a 88 last year and have plans for it. Nice to see something that has a lot of love be kicking strong!!!!
Thats very kool man. I think u couldnt of gone wrong with either platforms
Good for you, man! Been waiting to hear it alive again 😁. You'll get the bugs sorted.
🤞🏼
Can't wait for a street tune or something like it !!
Yea we still gotta do that
🤘🤘 Congratulations bud, can't wait to see this thing hit the rollers and put down some numbers 🤘🤘
Its getting there, thank you!
Nice, I just bought me a 7mgte today. My father is going to be uploading progress videos. I'll post the link once he starts
#7Mgte
Sweet man! We all love mk3 content
@@-LFATV yes. You have been an inspiration for us.
@@UnPetitPeuFitness thank you 🙏🏼
Great job!!
Had alot of help! Thank you
Congrats man! Happy to see you get it going finally!
Thank you 🙏🏼
Love that you kept the 7m man I just did everything new under the hood I could going for 600whp got aemv2 and 6262 billlet turbo with some Injector dynamics 1050x so should be fun
Yea for sure that will be fun
Roller coaster of emotions!
maannnnn lol
You're soooo close man. I know you've been on this Supra for a loong time now and I've watched all the vid. Can't wait to watch her run once more!
Its getting there! Thank you
She runs! This is so weird of a coincidence but I got my mk3 running too after nine months just yesterday 😄 also still had a few bugs to work with but otherwise everything checks out fine
Noceee congrats man
So happy for you brother!! I could literally see your dreams coming true! 👏👍🏻🎉
Thank you man!!
Going to be following this!
🙏🏼
@18:48, did you use sheilded cable for the Cam & Crank Sensors, number two Did you Ground the Shield on ONE END ONLY (Either Engine block or ecu side) to ensure that there's zero interference?
Man that first start and reacion had me grinning so happy to see this thing and hear it start in so long since i've been watching these videos.
Yea i did
Hell yea brother congrats
Thank you bro
That's it I'm finishing my harness tonight
DO ITTTTTT
cool video. as always.
Do you have tips for rough ideling when cold? or hard to start? (sumemr too)
I know sometimes moisture is in the connectors of ignitor and AFM connector , i will use delectic grease carefully . but do you any other tips?
I would disable the clutch-in-cranking requirement as it will mince your crankshaft thrust bearings if you have a clutch with high clamping force because it is applying load on them before you have built oil pressure so its metal on metal
Great advice ima have to do that later on because the upgraded clutch will go in before Dyno
Congrats
Thank you
Man love to see it. This past December I bought a second mk3 with a 7mgte from copart and just needs a few things to be complete. Can’t wait to drive it since my other mk3 7mge blew a head gasket not even 4000 miles into a completely rebuilt engine because of a bad thermostat. Can’t wait to drive the new one since it’s in a lot better condition overall than my other one and already has hella upgrades.
I went through so much with my first supra but at the end of the day I still love driving these cars because of the smile it puts on my face with the crazy torque and insane 3rd gear.
Thats bad ass man. I woupd like to get a second one to daipy but hard to come by
@@-LFATV I will be using the red one I just got to daily and prolly use my old one as a drift car to have fun on the track. It has a very similar color to yours. I remember being inspired by your car for the paint job a couple years back.
@@henrycamacho8573 must be nice lol but thank you 🙏🏼
Had me at the edge of my seat man the whole video lmao 😂
Haha me being there
Hi! Thanks for posting these videos. I really enjoy them. I have a 91 5 speed 7mgte that is not running. I’m located in the Bay Area and I have a hard time finding a shop to do a rebuild. You know of any? Do you do rebuilds? Where are you located?
Thank you for watching, unfortunately no i dont, i barely have time for my own car lol but there is a few in california. Top of my head i can think of “sideways performance” but quick search on google
Hey man,
Is there a way of seeing your spec list other then on Facebook?
I am especially interested in your intake manifold, headers and turbo.
Much appreciated 🙏
This has all been convered in previous videos
This is so awesome man! Well deserved! You should do an after build video Id like to hear if there's anything you wish you would of known to do in order to avoid some problems and make the build a little easier. Also what was the budget and did you go above it?
I definitely will once its actually running on the streets
Let’s go bro!!
Hola cómo podría conseguir una web performance para mi supra y adquirir piezas de motor
Freaking awesome
Thanks dude
How did u get the rpm gauge to work ?
I went full ignition sequential and the rpm gauge stop working
Mine i wired it to ecu
Do you mind letting me know how or where can I find the wire on the stock harness.
I have exactly the same set up as you.
@@leonardohugo69 its on my wiring videos
🔥🔥🔥
How the talon doin ?
🍀👍🇲🇨🌏🌏