Will a FREE Boat Run & Drive or SINK after YEARS of Neglect?
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- Today we bring an abandoned boat back to life!
MERCH! www.junkyarddi...
Send us stuff!
Junkyard Digs
PO box 1623
Ames, IA, 50010
Follow the gang!
Junkyard Mook:
/ junkyardmook
Dylan McCool:
/ dylanmccoolvideo
Cars and Cameras:
/ carsandcameras
Pole Barn Garage:
/ polebarngarage
Thunderhead289:
/ thunderhead289
Wrenchin Redneck:
/ @wrenchin-redneck
TheCriag909:
/ thecraig909
DeBoss Garage:
/ debossgarage
#boat #revival #junkyarddigs
![PURPEECH - นี่ฉันเองคนที่... (It's me) [Official MV]](http://i.ytimg.com/vi/NuhHd0hOOg8/mqdefault.jpg)
Thanks for watching!! Check out our merch at www.junkyarddigs.com/
hamburgers or hotdogs. which is better?
You must have been busy cause it's the 14th and you said it was the 2nd on the video I been wondering if when you was going to put out a video
Sorry didn't know you had to do all this work to it now I know why it been a long wait for a video
Sorry for messing with sponsorships, i know that's what makes this content free, but please do your own research before purchasing RayCon Earbuds.
@@skrrtskrrt646 I have three pair I've used for 4 years now I absolutely love them. I don't even read a script when I do these ads
As a fellow boat owner, it’s nice to see these older boats get some attention but I wouldn’t call it love😂
No love
This did NOT feel like love!
Codependency
It's love, it might be love in the way Lenny loves field mice. Might love it to death, but it's love eh?
love is when you sell it.
I scanned through the comments quick and didn't see this mentioned. Never run the engine with drive trimmed up more than halfway. It will smoke that gimbal bearing. Also the reason marine fuel pumps are different is because when an automotive pump diaphram leaks it can weep fuel out through a hole. Gas fumes settle into the bilge and stay there, so big badda boom if fuel vapor meets ignition. That drive will probably be a milkshake because what likely happened was a shaft seal went out at some point and the water got into the gearcase and cracked it when it froze. So that problem is probably still there. Run it as long as it's fun, and then when it's not put a bigger engine in.
LS swap the mfn boat
Heck boatyard digs has returned! Love the boat revivals! Small engines too
Boatyard Digs.......with your host Captain Stubing.
boatyard digs is the best :D
I'm not a boat guy but I grew up around a 54' Manson... I can appreciate your efforts and passion for bringing old stuff back to life. You guys are a great couple... don't change. Keep up the great work!
You saved that squirrel from weeks of torture lol they was having a blast playing with it but it was terrified that's crazy
my old cat used to do that with mice,
they either escaped or died from heart attacks after a few hours
yeah i saw the .22 in the frame right after 😂 I knew it was comin
I never knew squirrels played dead!!!
Bushy tailed tree rats.
@@Adam-kr8wy same....
12 seconds. Last time I was this fast my partner was never more dissatisfied.
You win 🤣
12 seconds would be a record for me!
heck, I'm usually asleep already at that point..
@@carwashadamcooper1538I would keep that to myself if I were you
What is his Name
😂
Those minutes of running dry would do that to the impeller - never run an impeller dry for obvious reasons.
Loved the content. Hoping for more boats soon! 🤩
i was gonna say something but i was hoping he would check it or find out its overheating before the test run
Also, ripped boot can alow water to enter the boat.
After watching season 1 of putting the corn in I audibly snorted when he said that it would be fixed in 2 days. Nothing on this channel is ever on time. But I love it for that.
It's always great to see Jesse haven't seen him in a long time
Hi Kevin running the boat without water going through the water intake could scar your impeller and make the motor run hot. The impellers are made of rubber and water lubricants them.
fun fact water is not a lubricant all it would do is cool the motor
Was just gonna say that, from experience that exhaust hose is a pain to replace when the impeller pump doesn't pump water out the exhaust.
Just about to write that.... and I saw yours.
@@TheTallOne890Yeap....
@@TheTallOne890 also keeps the rubber impeller cool without water it will get hot and eventually fail doesn't happen immediately but I wouldn't run it to much like that
That smile on your face at the end is totally legit. You can tell you're so relieved and having so much fun. Great video. I love your attention to detail. And I would drive anything you've worked on. Great job!
I just wanted to say I feel your pain on the finding more and more issues in a second hand boat. That being said you have tenacity and skill and a pretty good sense of humor to cope haha.
The old boat cleaned up nicely! Great job on bringing it back!!! The gauge clusters are cool looking on these old boats!
I like how you’re finally using your marine fuel tank in an actual boat😂
Why I love outboard motors. Great work.
If there's anything to wear a dust mask for, it's fiberglass dust. That stuff is literally microscopic shards of glass you're inhaling.
"There is no evidence of long-term damage from inhaling fiberglass particles" I mean you're right and I'd certainly wear a mask but it's not that big of a deal
@@hhaste - "There is no evidence of long-term damage from inhaling fiberglass particles"
What is "statements written buy fiberglass companies" Alex.
As a 20 plus year boat tech I love you reviving the old 120. But running this without the lower unit that impeller is cooked in the time that you ran it. You’ll have to drop the lower half of the lower unit.
I bet all the bellows are toast too.
Love the show and the content. Keep up the great work!
You two are awesome! Love the chemistry between you two!
Glad I'm not alone here today. lol
Kevin the most boat-owner thing you could have done was to stand next to your boat, wearing a ballcap, sunglasses, shorts & deck shoes and cold drink in a plastic cup. It was a perfect moment in a great video.
Love your stuff!
i'm a career automotive tech and I've been watching you since I was 16, you've gotta be one of my favorite channels. i recently had some health issues at work and I've been rewatching all your old content and it all holds up great. keep up the work man, you've built one of the best car channels on youtube. also a red head and you inspired me to grow a beard which is shockingly coming in like yours
I want to just say that this is the most laid back and chill video I’ve seen so far, and an amazing wholesome moment between Kevin and Mook.😊
Enjoyed seeing Jesse too
Mook: "I'm fired!? Great! See ya!"
Well, THAT was different! It was also a bloody good watch! Never knew how the exhaust and water got fired out through the propeller and it's quite fascinating to see how engineers solved the issues when developing the inboard engine's drive delivery.
When something is free, it never is. Over the years I have found there are very few things that are cast off by other people that don't require a bit of fettling.....or a complete rebuild.... or that are just toast and a great example of the metaphorical doorstop....or boat anchor.
That being said, with a bit of ingenuity, a steep learning curve, the help of the internet and some handy advice (along with an open wallet and / or possibly a working credit card), one can make the freebie cruise again and have a few more great memories with it - be that a car, truck, quad bike or boat - and the feeling of accomplishment that goes with it? THAT is what makes it worth while.
The scenery on the lake was spectacular and such a beautiful day to take the boat out as well. Awesome job, people. Absolutely fantastic to see the old girl move under her own steam (smoke?) again. All the best.
Boat engines usually have an rubber impellor in the waterpump. With the first start up it was burned up. Secondly where the space gets smaller it pushes out water and where it gets bigger sucks it in the pump.
Kevin. When working on fiberglass use a sawsall or multitool. Never an anglegrinder.
Try to get hold of a 4 cyl diesel (car/excavator or so).
Put a piece of flat steek between the wood. You can drill and taper the holes for the bracket and use bolts instead of woodscrews.
excavator engines are expensive he should put a vw tdi in it
I've found out it really doesn't do much good to say/advise,or anything on the replays, because they"ve already done everything B4 hand,In other words... TH-cam,or the editing,or whatever is never in real time,like utube may say posted 2hrs.ago & it's been 3days ago.I just wished someone happy birthday & it was come to find out was 5days ago,even tho it said 2hrs ago,SOooo...
@@Djdj-kd8ue comments: not for the one who posted it. Or it must be an more post on the same boat/engine. But for the ones watching it and using it at advice i hope it does.
Posting: it was filmed in the past then put toghetter. So the stated moment of putting it online is always filmed earlier.
So why would the stated moment of putting it online be incorrect?
@@seanmckay3392 dont know whats more obtainable in the states. In my home country(the netherlands) i needed a diesel for my citroen. Got 1 for about 150$ with 100000 km(some 60000 miles).
I love Kevin but I was dying when he was revving it up on the first stat, I'm like oh no, he is frying the impeller LOL
Definitely worth an engine rebuild. Keep it going! Love you Mook.. Heck boatyard digs has returned! Love the boat revivals! Small engines too.
Not gonna lie that bean update really made my day I've been wondering if the crop was doing ok. Always great to see you working on something Kevin and Mook can't wait to see what you come up with next
Enjoyed the boat work... always enjoy the automotive, but the agricultural and snowmobile/atv is always interesting... thanks
I work at a boat dealership/repair joint and I've gotta say that B.O.A.T acronym has gotta be the most accurate thing I've ever heard😂
I loved this change of pace. Reminded me; The best days of a boat owner are the first on the water Andy they day they sell it. And: Boats are holes in the water that you pour money into. I still want another one.
The 2 best days of a boat owners life, the day you get it and the day you sell it lol, nice job on gettin after it and making it happen.
true!
I have LOTS of great days on my boat.
Maybe they're just doing it wrong.
@@StubbyPhillips they are. Or they aren't upkeeping it right
boats are a joy to use, if one keeps the maintenance up and they work great and safe to operate. Raised two daughters in them and school work and good behavior was accomplished by boating. Maintenance was the key
Thank you so much on not calling it a ‘Iron Duke’ I’ve had forum wars over that name been applied to the 153/181 GM industrial/Mercruiser engine. I had a GM 181, it’s big brother from a Crown Forklift I was going to use in a little Model A build in Australia
this was sooo awesome to watch all the way to the last shot! the best ending EVER
Its always interesting to watch someone who doesn't typically do what you frequently do and see how they do stuff. Loved seeing Boatyard Digs, if you ever want an adventure with some junk jetskis, let me know!
Kevin, if you want the boat, shiny white within 5 minutes, toilet bowl, cleaner acid and snow brush and then wash it off. Interior you can use your dgerm or Mr clean sponges
Jesse saying “I’m 21” made me feel old and I’m younger than him, I saw the series on Jesse’s V6 Camaro when it came out and correct me if I’m wrong but wasn’t that his first car? 😂
Definitely worth an engine rebuild. Keep it going! Love you Mook.
Nice change of pace video. Enjoy your free boat, it looks great!
we just got the exact same boat for free and i had no idea how to work on it so thank you for this video
There's one of these boats for free every week in my area, and I'm not terribly far from these guys. I have to keep telling myself that boat ownership isn't worth it.
I'm loving your side projects, boats, farming, campers etc...
I remember you and Angus on a boat last year. There’s nothing Kevin you can’t do. Will need a lower housing unit. Because the liquid steel won’t last and the skew at bottom is broken. And Mook is not terrified any longer. Enjoyed the Video. 💯👍
Skeg. I hate auto-correct.....
Mook’s ride to the lake was hilarious. I hope she never changes!😂. I was ready to see her with 3 pairs of water wings on a two life vests😊
Congrats on all the hard, expensive boat work . 👏 You and Mook deserve to relax and enjoy.
Well definitely put a new water pump in it now after sitting that long and then running it dry
BOAT Break Out Another Thousand. No biggie. Yins guys rock. Doing a great job. Keep up the great work
In the 80s we had one of those boats maybe it was even the late 70s. I was a kid and it was a fun boat when it ran but the motor gave my dad a lotta trouble mostly because we lived on the ocean and the salt just ate and got into everything, EVERYTHING. The best memories that I used to have of my young life were from that boat so I hope you guys get the same from yours and you’ll be surprised at how peppy it is
Oscillating multi tool works dang good if you have to do fiberglass again
Gotta love a good boat revival every now and again. Captain Kevin
Good to see you two again. Seems like u two having a great time on the lake with y’all’s new toy. Have fun be good be safe.
Hey guys, I love, love, love, love these boat videos! They are truly amazing! Thank you all for everything you guys do!
Has cap off you crank. Clearly sees points, cuts to cap on "probably a points system" this is why I've been subscribed since always
Glad you were able to make it out onto the lake after all that work! So worth it!!! Beautiful night for a ride around the lake!
when you removed the motor. My first thought was perfect, a couple of sawzalls and a dumpster was all you needed.
Glad you two had a great day on the water!!
Always a great day when junkyard digs uploads.
Outstanding Job on your engine overhaul. The way I feel...its like the engine practically is a rebuild with a few exceptions.
thanks for the great entertaining AND educational content as always. Also hoping your dad recovers fully from that surgery ASAP.
Great video as always. Hope your Dad is ok after his surgery!
Always a good day when I get to watch you guys while I'm stuck at work. Thanks for the content, Kevin. You guys are awesome. 🤙🏽
I'm so proud of you guys becoming boat people. Congratulations!
Jyd did cars, atvs, snowmobiles, farm equipment, and now I think it's time they get their wings. Please do an airplane
If he did a plane, it would be the last episode ever
@@jaySilverE34 I hope not but lol 😂
Holy crap! @9:20 I could smell the exhaust fumes!!!
Best restoration content on TH-cam. Love the personality put into these videos! Keep up the awesome content dudes!
Great episode. Live in northern MN but i have family in Clear Lake. Boated around there as a kid. My grandma owned a bar in town called Carol's Lounge. I dont think its there any longer. Brings back memories of my grand parents.
Love these boat videos. Pease keep them up Kevin, there awesome.
🤜💥🖐️🤘Mook is truly enjoying the boat ride😉😁🤣😂😁
Impeller smoked after no water
Another fun MOOK & Kevin adventure
For once, boat tank is in a boat.
Nothing like seeing one of your favorite youtubers working on something you love. Love the boat vids. Im restoring a 1983 starcraft myself rescued it from certin scrapyard death
Kevin, I'm taking your word on the Raycons. I've ordered mine finally and I've used your code. They come in monday. Fingers crossed they work great! I Think they will lol.
They don't... they're terrible, why do you think you never actually see TH-camrs wearing them, if anything they wear airpods... never trust someone that advertises something they don't use themselves..
I bought some on black Friday and love them
@@BariLopesh Don't know till you try them.
@@caseyramseyer9874 Good to know. Thank you.
i got a pair of raycons when he started getting their sponsorships a few years ago. they're still kicking and not too bad for the price. better then airpods imo
I'm not sure if you've figured this out, yet, but you never start up the engine without having water hooked up to the outdrive because you will burn up your water impeller. It didn't hurt you because you tore it all down anyway, but they make "earmuffs" that you can hook up to a garden hose and they slide over the water intakes. When you hook that hose up to the water pump on the front of the engine you're only running water through the engine. You need the earmuffs hooked up to the outdrive so it runs water through your impeller in the outdrive, just like it's actually in the water. Also, your skeg is broken off the lower unit. You can buy one from a Mercruiser dealer and take it to a welder and have them weld it on and probably weld that crack.
I had a free boat once, I opted to prefer a friend with a boat 😂
Every spring it begins, spending thousands on parts, marina fees, boat hauling, fuel, and paperwork. Spending weeks buffing, waxing, tuning up both engines, bottom paint, zincs, and repairs. When I’m just about broke and just about ready to throw in the towel it all comes together, the boat hauler launches my baby and we go for a cruise. All the work, money, and stress are forgotten and I think to myself “this is friggen awesome” and I feel great! A good friend told me when I bought my first boat, if you start to try and justify the expense it’s time to get out of boating.
Kevin, I think this one deserves a new motor and maybe a drive unit! It’s a good unit
good unit?..did you not see all the rot Kevin pulled out?..if it's that rotten back there then it's also in the rest of the wood...best thing for this boat is a little pond or lake and just cruise it until it quits
@JunkyardDigs quick tip from the u.k ...your dewalt angle grinder... undo the 4 hex bolts at the top of the body where the motor attaches... rotate motor 90 degrees and refit... makes it more balanced...easier to control and feels lighter
That plastic housing that did not seal properly from amazon actually looked like a housing for the metal one, creating additional seal on top of the metal one? No idea, just guessing by the size difference. Yet another great video! That squirrel in the beginning was interesting, wonder if she was surrounded by them and could not escape or she was really playing around with them. Beautiful scenery at the end with the sun and the clouds. I was afraid the engine was bad, but it handled well.
@@gplugt7960 the engine needs a new block..but hey..Freeboat is game..lol
It is nice to see more of Jesse on the other side of the camera. You can't beat brotherly banter.
Hey man I hope the old man is doing good. Loved the variety of content
Good morning this was a different video and in my opinion that boat was definitely worth it. You now have a nice boat that you can enjoy on the water.
The happiest day of your life is the day you buy a boat...
The second happiest day of your life is when you sell that boat...
Thanks for the boat video, makes me feel like I am not alone in the never ending boat repairs. I have a 1988 21' Sea Swirl and last year I took my boat out once and found the floor was really soft. So I spent about 3 weeks cutting out the old floor and building in all new floor including fiber glassing it in with new carpet. Fall came so I quickly put it away in my barn and when I got it out a couple weeks ago I found I got busy and forgot to winterize it. I have a Chev 4.3 V6 and both exhaust manifolds froze and broke. Luckily I removed them and was able to weld them back up and all was fine. Time to get the boat and trailer licensed and take it out on the river. But need to get it cleaned out, this boat has a Cuddy cabin with a V bunks up front with a small sink water tank and stove. I sat down on the bed and crunch, the wood under the beds are rotten and now I have the cabin part all tore apart for new plywood and re fiber glassing. With boats it never stops. Looks like I will miss half of this summer fixing this damn boat before I can use it again.
Say goodbye to the plastic impeller in the lower unit. Always have a water hose connected.
Use oscillating multitool to cut through fiberglass. There's a lot less dust kicked up. It's just you know a lot more oscillating multi tool cutting stuff, which may or may not be worse.
Nice job Kevin, very entertaining and informative, a Junkyard Digs classic!! Enjoy the fruits of your labor my friend.
this sooooo explains and shows exactly what you get into when you buy (or get a free) used boat. I had a friend tell me "You know what you got there huh? A hole in the water that you throw money into." Couldn't be a more true statement. I have owned one one boat. And it was used. And I spent alot of time and money getting it water ready. So I thought. Got her ready to go.. went out (had a great time) and almost didn't make it back to the dock because of another issue that popped up. This happened 3 times. I'd fix a problem, take it out, and a new problem would arise. Finally got tired of it. Sold it as is. Learned alot about boats, but that's about it. Not a fun time at all.
Nicely done, neat old boat, looks to be mid 60s I'm guessing. I just brought a 1972 Aristocraft Nineteen back to life. mine is set up the same except mine is the mercruiser 165 which is a GM 250 inline 6cyl. We got it back in march and I went through the hydraulics, drive and engine as well as completely gutting and rewiring the electrical, she took her madden voyage on marktwain lake at the end of June. this fall my buddy is doing the interior for me and I'm going to give it a new carbon fiber dash and gauges. I love keeping vintage stuff going.
i really like jessie content! need more of him
Great video, you gave that boat some love for sure. Dad saves the day with his unsurpassed knowledge on fiberglass and everything worked out perfectly. Glad to see you get out on the water and relax after a long 2 weeks.
Every boat owner ever...its just one thing after another with this boat. 😂❤
My husband and I bought a basket case boat and rebuilt everything and loved that thing and spent many hours aboard and loved it. Thanks for sharing
Yes, finally a new boat video of yours. I loved the last one! Keep up the good work❤❤
Really loving these boating videos, a nice break from the norm (along with the Farming series)
Anchor? Life-Vests? Fuel? Prayers!!!
Enjoyable video watching you mechanical knowledge bring junk back to life. I would definitely recommend using a transom strap when towing as boats will leave the trailer when you hit a bump in the road etc.
Wow beans look great Kevin getting big fast @Junkyard Digs
Was literally coming here to suggest this. So glad we all had the same thought. Might as well get it done asap/before paint and floors.
That boat needs some 70s van art on it. You know, wizards, dragons, flying tigers and stuff. :D
wow really think you would get a feeling of pride growing a crop, i was proud for them
Haven't commented for ages but i am pretty stoked you got that boat out, i hope you have more fun on the water and have life jackets around
Great stuff. Lots of smiles . Thank you for that.