Can you guys make one with a 5.3 Chevy? Have a Silverado with Magnaflow catback that I'm interested in changing it up and something like this would help a ton!
I installed a street flow muffler from American Trucks yesterday on my 2017 5.0. Stock manifolds, cats are still on, took the resonator off and put on the muffler, reattached it to the stock exhaust so it still comes out behind the rear tire. Sounds like a magnaflow but only cost me $50.
I went with the dynomax race bullet on my 06 Nissan titan it has just the right amount of rumble an i can still have a conversion with my passengers its awesome
I just had a question. I have a 2012 mustang 5.0. I've done moderate work to it. It's right at about 500 horsepower. I'm curious about your opinion. I haven't decided which exhaust to go with right now. I'm running straight pipe and it sounds nice. But my question is what do you think would be better in your opinion? The flowmaster super 44 or the outlaw?
If the Netami NTR Race muffler isn't for retail sale yet, how do you get them? Cause i wanted to put some on my car one day but theres no way for me to get them
Need true dual exhaust without cats for maximum sound. New setup sounds okay but I would have left it behind the tire and tried to repair the original Muffler I'm sure it wasn't cheap but who knows maybe it was shot
i have a 13 raptor with the 6.2. do you have any other videos that have the included drive offs? im trying to figure out what im going to do with mine. i eventually want to do a full stainless works exhaust and headers kit but trying to find a midrange as far as louudness before i go all the way.
@@rod345 Its you!! I've seen your videos a few months ago. Thats exactly what I mean, and also that yellow 2012 Charger Superbee from Anthony Cahoon, these are good examples.
More muffler shops need to do this,A+ customer service from these guys.
One of best ways to make a “sound” decision on which one I want on my 5.0 is lift it up and rev up each muffler awesome idea
That’s the best way to do it!
Or no muffler.
I'd even pay for an additional hour of shop time for this service.
I refer to these for my 5.0 track car. Dang coyote rasp sucks.I want no highs pop just low ground and pound. H pipe seams to be the 1st part
I've always been fascinated with exhaust design,
so I thoroughly enjoy your videos.
A SUPURB way to market your business! 🙂
Good decision! They all sounded good, but the quiet idle and clean sound of the carven is sweet!
We thought so too!
I want that muffler on my truck, 2013 Chevrolet Silverado 1500 LTZ. I like his setup. Is his exhaust a 3" diameter?
how is the NTR muffler not available for retail ? That muffler sounds so good
He picked the right one. Sounds nice, deep tone and should last a long time.
Agreed!
I like the straight pipe the best.
This is a really good comparison right there 👍🔥
LOVE these videos!!! hope you do a oh crap ton more of these!!!
Imagine living in the apartment across the street...hearing all sorts of exhaust going off and revving lol 🤣would be awesome tho
👍👍👍❤❤❤❤ I really like these types of comparative videos, keep doing them.
Can you guys make one with a 5.3 Chevy? Have a Silverado with Magnaflow catback that I'm interested in changing it up and something like this would help a ton!
Good choice! I like the Borla and the Carven R. While I would have picked the Borla, the Carven R is a very close second.
I installed a street flow muffler from American Trucks yesterday on my 2017 5.0. Stock manifolds, cats are still on, took the resonator off and put on the muffler, reattached it to the stock exhaust so it still comes out behind the rear tire. Sounds like a magnaflow but only cost me $50.
I went with the dynomax race bullet on my 06 Nissan titan it has just the right amount of rumble an i can still have a conversion with my passengers its awesome
Good comparison but it think it would sound better if there was a 12-18" extension off the back the muffler
And what would that do lol
Chynaa!
Hard to get a good comparison like this gotta run the pipes all the way back
Netami sounds pretty good surprised by that one.
Same exhaust I have on my 2018 Yukon Denali. I love it!!!!
I just had a question. I have a 2012 mustang 5.0. I've done moderate work to it. It's right at about 500 horsepower. I'm curious about your opinion. I haven't decided which exhaust to go with right now. I'm running straight pipe and it sounds nice. But my question is what do you think would be better in your opinion? The flowmaster super 44 or the outlaw?
The Carven R was my favorite, too.
Any suggestions for a 10th gen Civic with a CVT. I would like a nice low growl sound if possible
I just can't understand why you wouldn't dual it out at the very least.
It sounds fantastic with every set up.
Yeah I like the multiple muffler trying vids
If the Netami NTR Race muffler isn't for retail sale yet, how do you get them?
Cause i wanted to put some on my car one day but theres no way for me to get them
One question, can the mufflers work with a Nissan 350z too?
@@Memez_N_Editz bud you can use any muffler with any vehicle. Only thing you need is ur pipe size so you can get the right sized muffler
@@chocolatemilk9102 that all I need thank you
lol fuckin dumbass clearly this dude don’t know shit about cars or exhaust systems 😂
Need true dual exhaust without cats for maximum sound. New setup sounds okay but I would have left it behind the tire and tried to repair the original Muffler I'm sure it wasn't cheap but who knows maybe it was shot
Yeah, just a single muffler delete will sound muffled.
Carven R for the win!
You guys should try aeroturbine mufflers it has afterburner technology diesel guys love them they sound awesome on gas powered vehicles.
Borla Atak all day!
i have a 13 raptor with the 6.2. do you have any other videos that have the included drive offs? im trying to figure out what im going to do with mine. i eventually want to do a full stainless works exhaust and headers kit but trying to find a midrange as far as louudness before i go all the way.
What is the part# for the ntr race muffler
I'd love to see somebody finally take a Zoomers Exhaust to you guys on a Charger SRT, sounds amazing.
I had Zoomers on my Charger and it was the best sound ever! (Videos on my page) highly considering putting a Zoomers on my 5.3 to see how it sounds!
@@rod345 Its you!! I've seen your videos a few months ago. Thats exactly what I mean, and also that yellow 2012 Charger Superbee from Anthony Cahoon, these are good examples.
@@DesertStateInEU yes haha that's me. Miss that Charger every second till this day 😅
Can’t go wrong with a carven R
Where are the NRT mufflers sold ? Cannot locate. If you still them I’ll buy two!! Let me know
Can't find them anywhere i also need two
Hey @exhaustaddicts Would a chambered muffler have less crackle on decel?
Can’t find the netami ntr on line
No Magnaflow small bullet?
What about Corsa Extreme?
Still want to hear a Porter Steel pack in the wild.
Give me that Blackwidow every time. I’m on my second coyote f150 with a black widow. First a venom 250 on my 21 then my 24 with a neighbor hater
I need two of them ntr’s how much
Too bad Ford doesn’t offer that 6.2L V8 for the F150 anymore!!!!
I actually thought straight pipe sounded really good
The black widow race venom wouldve sounded way better than the neighbor hater, the race venoms sound good with tailpipes too
the bullet added a turbo had to make more power lol
I’ll pick natami
Do you guys do cherry bombs
Of course they do bro
The cat was doing a decent job as a resonater, those "fancy" looking twin tips made the horrible rasp, should have just left them off.
Netami
💥MAGA🍒💣🤠
Yuhhhh🔥🔥
MENGA MINT!!!
Has anyone asked for boom tubes?!
Spin Tech
The black widow neighbor hater is designed not to drone I have them on my Mustang no drone
Borla
Flowmaster sounded best
none of the above