H22 swap transmission wont shift to any gears pt. 1

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ม.ค. 2023
  • H22 "stroker" w/ freshly Exedy stg1 clutch installed but will not shift to any gears when engine is running. Found out that clucth lining spline gear got damaged by input shaft during installation.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 14

  • @cbdreamer1709
    @cbdreamer1709 ปีที่แล้ว +3

    Happy it didn’t damage the input shaft! Thanks for the video

  • @Lastsight100
    @Lastsight100 ปีที่แล้ว +1

    I have used Exedy Stage 1 clutches before I liked them a lot felt very OEM. I however chose to go with Action Clutch in my recent build a stage 2 clutch and I really like it so far. Nice job on the repair I know it sucks to be set back and have to do extra work but at least it wasn't costly.

    • @sagittnet2158
      @sagittnet2158  ปีที่แล้ว

      Yeah man! I kinda like how the clutch pedal and good to know that someone like you have used it before. I Just need to be careful next time l guess when to mate the two. Thanks for chimin' in man.

  • @alpha_cg5
    @alpha_cg5 ปีที่แล้ว +1

    I’ve been running one since 2018 & started spraying a 60 shot on it the last few months. Been holding up but if you do no lift shifts it’ll start to slip a little but will go back to normal after a day

    • @sagittnet2158
      @sagittnet2158  ปีที่แล้ว

      Ok and tnx for your input, exedy clutch feels smooth on foot pedal,like it much. Thanks man

  • @Jahsani
    @Jahsani ปีที่แล้ว +1

    When I have problem putting the transmission to the block, I spin the input shaft, and try again, same thing with CV axles👍🏾

    • @sagittnet2158
      @sagittnet2158  ปีที่แล้ว +1

      I do the same thing on any of my previous build but somehow l got a lemon on the stroker lol! Thank you for the input and right now another bugs showed up. You guys will see it soon.

  • @oilytuna
    @oilytuna ปีที่แล้ว +1

    which USDM transmission would you recommend for an NA build? which transmission are you running on your set up?

    • @sagittnet2158
      @sagittnet2158  ปีที่แล้ว +1

      Any short gear Prelude tranny will be ideal for H22 like the usdm m2a4 and m2y4 and w/ lsd would be even better. Everyone is different when it comes to gearing. I myself used a m2b4(w/lsd) on my G23 but l felt that l need a longer gear on 3rd so l went using m2s4 and never use short gear tranny after. Are you thinking of using it on a g23? You cant go wrong w/ any of the tranny l mentioned, you'll like it. The long gear Accord tranny is another story, w/ c is good for boost. Try get a hold of 97-2001 Prelude tranny, m2y4 on g23 and start from there.

    • @oilytuna
      @oilytuna ปีที่แล้ว +1

      @sagitt net2 I'm actually building a f23/f22 NA motor with k20a2 pistons for a budget track build. I already have a f22a1 installed in my eg, and would switch to the other setup in the future. The plan is to use a h22 tranny so i can reuse all the shift linkage pcs. Thanks for your suggestions!