How to install MBCI Double Lok Standing Seam Metal Roof.
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Basic Tools needed:
Midwest snips: amzn.to/3rB99A9
Dewalt Screwgun: amzn.to/3d05HLs
Makita Impact: amzn.to/2MPYYZV
Rotary Laser: amzn.to/3p4J2A7
This is the third episode of this build series.
We run some liner panels, finish up the framing, and get the roof started.
Hope you enjoy videos like this. If you do please SUBSCRIBE!
Good video, also NARF is the sound Pinky of Pinky and the Brain makes. Excellent cartoon if you get a chance.
That was a damn good video man.
Thanks!
Good Video Thanks For Sharing and good team of workers Congratulations.
Nice video brother just what I was looking for ,, I didn’t know how to install those enclosures under the panel , I was doing some of those today but the panel were already screwed down and I had to pull the screws back out to put the enclosures , now I know they go first ! 🤝
Make sure you measure and keep them on 2' centers.
Building with NARF Yes Sir, is my first time dealing with this kind of roof so definitely this will help , we are half way on the building but like I say roof is already there I just have to pull screws out , put taki tape between the sheet , install enclosures ,, it’s kinda hard because you can only lift it so much but I’m getting it done 💪🏼
Q qw a ww2xwdfji@@ChemaXtreme02
Hey man good job.
Thank you
Thank you for that!
You bet!
Bugle tape.thats a new one lol.installing the mastic correctly is probably most important thing on the eave.when they check it,if there metal probe goes in at all pretty much instant fail
Nice job
Nice video! No greese caulk over top of the butyl tape in your roof laps ? I've always had to do that on dams and humps too. But, I also build these buildings in a land of snow and ice.
Hate this kind, i love the Locking one.
With all the extras (banding, bag and sag, vapor barrier, and inside sheeting) what are you getting per square foot to install the building?
Sick
What part of the country are you in.ibe built some of those buildings from that same manufacturer
Georgia, Vulcan manufacturers this building.
You don’t do modulation on the MBCI panel @ the lap or high eave ? Just curious because I was a steel building erector over forty years and I still get involved on big jobs as needed. Be safe
are those the ZAC screws your using? thanks for nice video!
Yes, but the company that supplies these refer to them as lifetime fasteners, very similar to a ZAC screw
On a 40x60..how much outa square can it be .before it's a problem
Out of square is a problem and the problem grows more as the project progresses.
@@BuildingwithNARF I'm out 3/4 inch..
This is definitely a cheaper method for commercial roofing but you get exactly what you pay for. I would never install this roofing on my building