Oregon Music Garage: How to Install Snap Loc Standing Seam Metal Roofing
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- In this episode of Oregon Music Garage, I show you guys the step by step process how to install snap loc standing seam metal roofing. This is about as simple of a roof as it gets. I will do my best to continue to add standing seam metal trim details as we do them. This video can be a starting point if you want to install metal roofing.
The Swenson Pro Snap Table is a legit tool, but obviously expensive for the average DIY metal roofing person. If you are however making a career out of this type of work, it is an amazing piece of equipment. It will really shine thru when we have to install our standing seam metal roofing on our hip roofs when we build our porches so stay tuned!
Snap Table Pro
swensonshear.com/product/snap...
Top Tool List
imp.i284638.net/orPQm
Looking for good hearing protection on site or at home that also doubles as your radio, allows you to take phone calls, and has noise reduction? Check out ISOtunes! I've been wearing them for over a year and they've greatly helped reduce the ringing in my ears at night!
bit.ly/2PoXSBw
Use my Code to save!! RRB10
Purchase Building Plans Here
rrplans.bigcartel.com/
If you'd like to support RRBuildings, below are various ways to help!
Shirts: rrbuildings.bigcartel.com/
Hats: www.beachandbarn.com/collecti...
Patreon: / rrbuildings
Instagram: / rrbuildings
I know it is weird to have two drops in one day...I got this video edited and figured why not!! Enjoy, and please like and subscribe If this content is helpful
Thank a lot KYLE.
Big Thanks! A two-for-Sunday!
What’s the name of the song you used at the end of the video
@@williammartino7118 Shazam says: Ooyy - Come 2Gether
Thanks Kyle! Really helpful videos. Love that your doing this correctly
For me, the ideas in th-cam.com/users/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
What a beautifully done th-cam.com/users/postUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU ! The instructions and the photographs are brilliant. It is thorough and genuinely informative. Ryan got another winner! No one does it better!
An 1/8 of an inch difference between one side and the other is 3mm in English money, which is nothing and invisible over that length. The fact that you measured, understood and considered whether it was good enough, is exactly why i love watching you and Greg do exacting work.
SLICK, NEVER SEEN BETTER‼️ QUALITY CONSTRUCTION, GREAT JOB‼️‼️👍👍. Vinny 🇺🇸
This is great, I LOVE this metal roof series, great craftsmanship tips with the no penetrations, paritcularly at flashing. Love it.
Amazing tradecraft and craftsmanship. A lot to remember. People underestimate the math and brain power required to do construction right the first time. My hat’s off to you and Greg! Great work!!
Looks beautiful and you two make it look easy! I love the look of standing seam....wish they did more here in California. Keep up the great work and thank you for sharing the videos!
Man this is a realy, reaLY, REALY good instructional video I will review it 5 minutes before starting my garage roofing next spring, the quality of the shooting is flawless knowing that you dont have a cameraman following you on every moves you took time to reposition your camera for every angles of view...The length and details you gave us is phenomenal you easily can be an exelent teacher who know is trade because he work on jobs before, I will backtrack you videos listing to learn other stuff, BRAVO.
as usual you guys make it all look effortless great job guys
Nice to see those safety harnesses. I shattered my left leg below the knee from a bad fall. Safety first. 😊
Just finished installing this exact same product for a pole barn house. Very insightful and we could definitely use these tips in the future. Always make it eater proof but fine details are really important too.
Love your videos. So glad we got the bonus video this week.
Have that same premium roof on our home - in Patriot Red. Slightly different install details (used a different eave trim and didn't use the cut-and-flip-over method on the little exposed end), but really like the look of the subtle 'folds' in the center of each panel. IMO and for those wondering, this is one of the best no-fastener roofs for a DIY'er (thats' me). The product quality control is great and the ease of install very nice. I've since added the matching snow retention bars as well that clamp over those standing seams (we're up in NW WI). Great choice Kyle! Excellent descriptive video for sure!
الهند
Greg is so brave for walking on that wobbly building, especially after being singled out :)
I think it’s cause the camera is on the lift that it looks like the building wables
Better not be wobbly!
Your attention to detail is super impressive! Great work!
You make that look so easy. I always enjoy your work. Keep it up guy's.
Your skills and attention to detail is amazing, nice work 👍🏻
Okay, so this looked like fun work and so rewarding when looking it over.
Great video. Thank you for taking the time to explain everything. Looms great as always.
Brilliant system guys... best metal roof system I've seen...
Kyle and Gregg, keep up the great work!
Dude your an awesome teacher. Just had to give you a shout out. Awesome workmanship!
Daaaaaamn look at u go Kyle. Lol just kidding brother know its a lotta work. Right on for doing it all man! Truly appreciated.
Thanks again for training it was awesome and informational. Your the best Greg 👌
Nice work, great tutorial. I was going to roof my place with R panel, but after checking local availability, and watching your video I am likely to use this style standing seam roofing. I just wish the video had some content on dealing with roof penetrations.
The quality shows!
At 8:31, I am completely distracted by Greg's brand new "roofing shoes" -- another subtle revelation of professional equipment! Keep up the good work...
It’s crazy how much your building sways when putting on the first piece of roof steel 🤣. Obviously kidding. Your attention to detail and craftsmanship is really remarkable.
Double upload? Am I dreaming?!?! Hit that like button y’all
I love your work you are doing
Thanks for posting. Very nice.
I love the care and pride you take in your work that you do
You and your buddy do great work / i'm a perfectionest and so are you / a proud job when your finished and confident work process
Looking good , love the no screw look much cleaner 👍
Holy crap! Two drops in one day!
Sending my support my fellow roofers. New friend here from Philippines 🇵🇭🇵🇭
This type roof is totally awesome!
Good evening from Houston TX
Heck yeah! 2 videos in 1 day, my guy!
Enjoying the show
Thank you for the content. Great work
Hi Kyle, great work on your details. The storm you (we) had hit Cedar Rapids hard. It's worked Derecho; it's pronounced Dare, Ray, Show. The dare might have a U sound instead of the A. I never heard that word until 2 days after the storm.
That’s a sharp looking roof 👍
Great video...I'm watching to learn how to install snap lock on a shed building. Can you offer any advice on what to do when the gable is slightly out of square with the eve?
Quality throughout. Nice
That is one good-looking roof
Sweet new video
Just ordered my IsoTunes and used your coupon code. Thanks!!
"...I could be listening to music right now- Why don't you keep working by the way!..." Great ad placement, Kyle! (And folks, I got my ISOtunes Free with RRB10 code!..Buy two so you have one charging and one ready in your truck or home...I do lawn work with mine!)
Haha thanks bud
Hey Kyle, One thing I haven't heard you talk about is bookshelf framing vs. on edge framing. I'm wanting to know the pros and cons of each. I'm assuming you prefer on edge so you can build your walls on the ground. I'm planning on building a 30X40 shop (doing most of the work myself) but I'm thinking about doing the bookshelf style because it would be easier to sheet the inside of the shop, as you wouldn't have to frame the inside. Thanks for all of the great videos! I wouldn't have been very confident building my own shop without your help.
Is there a video on how you guys tackle the ridge portion along with any examples of how you handle vent stacks etc? thanks for the video! Going to be doing my first metal roof on my own place soon. Super excited!
I wrap tools that come in contact with metal in blue painter's tape. It will eventually wear off, but several layers will keep it from marring the surface and it isn't clunky like cardboard.
That standing seam sure is good looking.
this is really a good video I am going to be doing a roof this summer, and I need all the info I can get.
Awesome stuff!!!
love your vids and tools by the way lol
It's looking good bro!
Thanks Peter!!
Good for garage!!! Thank you
Very well done
Nice job. Thanks
Great video
Good tutorial, thanks. What Mgr of fall protection reels do you use? They look like self-retracting and work well. Haven’t been able to find similar yet.
You mentioned a storm came through your work area. I was wondering if your buildings are tornado/hurricane rated or have you had it tested to see what the design can handle. Considering you use heavy duty anchor points, engineered posts and cross-bracing I figured it would be able to withstand quite a bit.
Great vid
Loved the “That’s all it takes GREG” edit!! 😂😂😂
that's the angle i was looking for
😂I want to see you at 2 story building doing the same Job .. good luck my friend..nice video 👍
Kyle, I've been cringing as I watch you use your hand/fist as a hammer. By the time I was in my mid 40s, my hands were toast from pushing chisels, Yankee screw drivers (the original cordless automatic screw driver) and tapping pieces together. The arthritis and nerve damage required I massage my hands under warm water every morning so I can go to work or just hold a pencil or breakfast spoon. Now, at 65, I have trigger finger and trigger thumb from tendon inflammation and tendon sheath trauma. My thumbs and little fingers catch and lock as I close them. I've had cortisone injections and finally surgery that failed after 6 months. I can't hold a pen to sign my name without massaging my hand first. I take 2 grams of aspirin a day just so my hands are minimally functional. I know too many men my age with similar grizzled hands.
Please, carry a rubber mallet and save your hands. They are your livelihood. The precision work you do with them is amazing.
Death by a thousand cuts. Kyle and Greg, listen to this advice.
Absolutely this. I'm 31 and I've got significant nerve damage along with tendonitis, carpal tunnel and recurring ganglion cysts. All but the cysts are some degree of overuse injury and the classic hand as a hammer thing and it's insanely debilitating. I've been working with my hands my whole life and it gets harder every year.
Wisdom speaks.
I’ve never seen or heard of this until reading your comment. Wow, sorry to hear. Thanks for sharing, good advice.
thank you for the advice ill probably never punch a piece of lumber again
Thanks for professional advice with good videos!
What is best for big snow? Standing seam or face screw? WE just started building in CO at 7000ft altitude and some wicked whipping wind. Our design is a Clerestory roof with ICF exterior walls, 'cause lumber costs are WTF....... sky high! I have drawn these on my software, but my software does not think outside of the box for framing specs?
2nd Question ; How would you frame a roof in the Clerestory design, with one side run at 16' and the high side run at 24'? ..My novice research on the engineering of ICF walls suggest we do have an advantage of building roof system with parallel chord trusses. No need for collar ties.
Hi great vid. What hand power tool are you using to make the long cuts when prepping the two end sheets and what type of blade is it?
Our supplier “AB-Martin roofing” here in newville PA the snaplock standing seam comes with those details done already from there machine our style has a round top as well instead of square, but I’d love to have a machine like that for angle cutting and such
Looking good my dudes LOL.
Looks good. Just wondering why you don’t put the roof edge on first and then lap the roof underlayment over it. It looks like right now any condensation would flow under the roof edge and get the edge of your OSB wet. Also in my thinking, I wouldn’t use the butyl tape at the bottom. I would want water to get out. I can’t really see water backing up that surface. Let me know your thoughts.
Are you concerned about water/moisture getting under the roofing panels? Without the pulins directly under the metal roof panels it looks like water/moisture could get trapped against the underlayment and OSB.
You should look into getting a Samsung Note phone. The pen and productivity features are amazing.
Film Greg's reaction when you show him adoption papers
Hilarious
Nice to see a clean roof without plumbing stacks or wood stove metal chimneys. Is that possible to do with this roofing style?
Just ordered my isotunes and used code RRB10. Worked like a charm!
Good for you let me know what you think
Best video!!!
Durecho A sideways tornado. Pronounced "Der -esh-oh" We had one in '69 in northern Ohio that took out over 4000 trees. Next "Wish I could see how the top cap is put on. I can guess at a seam (or whatever it's called.) when the roof goes 90 degrees. However, good enough stuff for me to do this. I'll be 72 next year and the hell with paying someone 3 grand profit or more to do my roof, that I put on 30 years ago. Besides, it's a 12-12 pitch. I made a set of steps to do the roof last time instead of a ladder. Super safe.
Looks very satisfying, very clean ,, like wow , I want to do this , until I’m on the roof in mid July and August ,, then I’m like nope , this was a terrible idea .
As I passed by the site today you were on your phone and Greg was sitting down, I was disappointed that I didn't see you working?
Thanks!
Might need to get the boy Greg a mic. Need to hear the other end of the banter!
Looks awesome! Installation is kinda like vertical vinyl siding. What is the brand of these panels?
Is there a reason why you don't continue the roof wrap down past the fascia? Doubling up on the weather protection sounds like a good idea when working with lvl.
At those bottom ends of the standing seams, is there a chance of bugs getting in there and building nests? Maybe a quick spritz of bug repellent foam sealant before closing the tabs? I know they won't have access inside the house but anything to cut down on pests seems like it could only be a good thing.
The thumbnail looks crazy on a mobile screen when you scroll. Like one of those optical illusions, the metal almost crawls up the screen.
Muchas Gracias expertos con experiencia
My question is about the durability of standing seam in high wind and snow environments. I live in Central Ontario in an area that historically gets a lot of snow and wind due to the open fields. How does that standing seam hold up long term to the wind and the snow. My first area of concern would be the seam that is pressed into place over top of the male end. Would snow, ice, or water not slowly work its way through that seam since there is now gasket or Sealent to stop ice or water?
Also, I just want to thank you for the videos. I'm really learning and enjoying them.
Metal roof DIY, step 1: buy $10,000 tool.... J/K, great this is a great video. Super clean install :)
tape will work on a hand seemers but not that long i tryed that but over time will scatch the panels up
I love these roof panels. I'm in the process of getting some land and building my own barndominium in West Australia and definitely be using these panels. can they be used for the side walls too? they seem so easy to install and recon I could install these by myself. Only thing that concerns me is whether having insulation underneath will warp the panels. what do you think? by the way, you explains this really well and give good reasons Why you do it so. Awesome!!
Damnit I watched the whole video wanting to se more details on how the gable ends are finished, do you have another one that shows that specifically?
I have a handful of tools that I have gorilla tape so not to mar up metal, works great.
Looks great. What is the thickness of your sheets over there? cheers
I came here for the rake trim process... do you have a video of that?
the building didn't sway as much after the derecho. ( hope this helps with the over/under bet)
Hello, thank you for all those explanations, in my house I currently have a roof with tiles, it is almost 30 years old, it still looks good but I plan to install the metal roof similar to this one that you are installing and I would like to know those panels and other parts where can I get them? Do they have to have some specification, caliber (thickness) of the sheet? . I would appreciate any information.
This looks pretty straight forward, but how difficult is for an otherwise experienced carpenter to do for the first time? I'm thinking about doing my own roof. Thanks!